Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

Recommended Posts

We decided it is about time to get a new roof on the cabin on Cook end.    Looking for somebody to do it.  

Cabin is one story, 24 by 26 not too steep roof.    

 

Any recommendations appreciated.

Link to comment
Share on other sites

On 4/9/2022 at 9:10 AM, delcecchi said:

We decided it is about time to get a new roof on the cabin on Cook end.    Looking for somebody to do it.  

Cabin is one story, 24 by 26 not too steep roof.    

 

Any recommendations appreciated.

Del, it took me over a year to get a crew to do mine. I worked for a building materials wholesaler and provided all the materials myself, I just needed the labor. I have asphalt singles. The quotes I got up here just for labor were way more than material and labor down in the cities.  I have a 12/12 pitch roof on the cabin and garage, some local crews didn't want to do that steep of a roof. I knew a few crews down in the cities from being in the industry and it took me awhile to find one that would make the drive, this crew lived in Mankato! I ended up paying for a hotel room for two nights and grilling lunch and dinner, but they got it done. I easily saved half of what the locals charged, that's if you could even find someone to do it in a reasonable time frame!  The best bet is go to Menards in Virginia, back by the building dept desk is a rack on the wall with flyers for local trades people, grab some roofing contractors. Try to find someone that will just do labor, you provide all the material, buy them at Menards when they're 11% off. You'll save a ton of money if anyone will do it that way, or Cook Building Ctr will give you the names of some contractors. One contractor quoted me $650.00 a square for 12/12 pitch, think it was $525.00 for under 8/12, for materials and labor, plus $500ish for dumpster. You can buy good architectural shingles for about $110.00 square, plus ice/water, felt, nail, caulk, vents, metals, etc. You can find very good crews in the cities that charge well under $150.00 square labor if you have contacts. Plug in some of your numbers and you'll see there's a hugh profit to be made in roofing! And yes, I know about the cost of running a business 🙂

  • Thumbs Up 1
Link to comment
Share on other sites

So you're saying that there is a very low chance of finding someone to redo the 24/12 pitch on my boat-access A-frame? 🤣

  • Yayyyy 2
Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders
On 4/9/2022 at 9:10 AM, delcecchi said:

We decided it is about time to get a new roof on the cabin on Cook end.    Looking for somebody to do it.  

Cabin is one story, 24 by 26 not too steep roof.    

 

Any recommendations appreciated.

Do you have insurance on it?  Get a hail damage claim on it and have them find up someone to do it! 😉

Link to comment
Share on other sites

4 hours ago, SkunkedAgain said:

So you're saying that there is a very low chance of finding someone to redo the 24/12 pitch on my boat-access A-frame? 🤣

I'd say you might even get....               skunked again😃👍

Edited by CigarGuy
  • Yayyyy 3
  • Thanks 1
Link to comment
Share on other sites

Sorry I can’t offer any help but I’m in the same boat(lol!).  And hope you don’t mind me chiming in.


We are going to be in need of a new roof in the next year or so.  So I fine this topic interesting.  Our cabin is water access only so that may add an extra problem.  Also I was thinking of switching to metal and was hoping it could be over out one layer is old shingles as I think the underlayment in good.

 

Anyway if anyone has any insight into this I sure would welcome your thoughts.

Link to comment
Share on other sites

On 4/16/2022 at 1:39 PM, Wanderer said:

Maybe @StillFishin' and @delcecchi can find a roofing crew from out of town that will do both roofs for added incentive to travel?

 

Just a thought.

Works for me, or else somebody's brother in law might do it.   Roof isn't very steep, maybe 4-12 and probably only 8 squares..  cabin is only 24 by26.   

Link to comment
Share on other sites

call austin miller roofing, he did a great job on 7 roofs he did for me last fall. fast and professional.

Link to comment
Share on other sites

Got the first response, $6600 bucks.     Seems like a lot, but I do recognize that there is some overhead to small jobs so that might have an effect.    Timberline Architectural shingles.   

 

Link to comment
Share on other sites

2 hours ago, delcecchi said:

Got the first response, $6600 bucks.     Seems like a lot, but I do recognize that there is some overhead to small jobs so that might have an effect.    Timberline Architectural shingles.   

 

Del, how many bundles of shingles? Did they give you an itemized quote? 

Link to comment
Share on other sites

4 hours ago, delcecchi said:

Got the first response, $6600 bucks.     Seems like a lot, but I do recognize that there is some overhead to small jobs so that might have an effect.    Timberline Architectural shingles.   

 


That’s about double what I calculated it might be by CigarGuy’s earlier estimate.  And no offense to either of you but I thought you’d have a hard time getting anyone to jump at a $3,300 job these days.  JMHO.

 

We had our roof done last year; pretty easy one, and it was ALOT more than that.  But an insurance job and probably priced accordingly. 😉

Link to comment
Share on other sites

When our city house was done the other year, I pointed out all of the extras and lies on the itemized bill. The insurance company said thanks but we just pay what they invoice. It's easier than arguing. The roofing folks know this game so they load the invoices and pad their pockets, all while paying very little to the crews up there doing the work.

  • Thumbs Up 3
  • Wow, ❤ 1
Link to comment
Share on other sites

1 hour ago, delcecchi said:

Not so good with HEIC... 

JPG here

IMG_8460.jpg

IMG_8464.jpg

It looks pretty easy and I agree that seems like a lot.


I’d almost offer to do it for you myself but I’m a little over committed as it is.  I didn’t do my own because I didn’t have the time and insurance was covering it.  I haven’t even been able to get back up there to handle a couple trees that have been requested. 😔

 

1 hour ago, SkunkedAgain said:

When our city house was done the other year, I pointed out all of the extras and lies on the itemized bill. The insurance company said thanks but we just pay what they invoice. It's easier than arguing. The roofing folks know this game so they load the invoices and pad their pockets, all while paying very little to the crews up there doing the work.

 

I think this is 100% accurate based on my experience too.

Link to comment
Share on other sites

I went online on got approximate prices on materials. Shingles approx. $1000.00 Ice/water, felt, starter,ridge cap, nails, staples, caulk, vents, misc metals approx $1000.00 (guessed high on these)+ dumpster/dumping materials-guessing $400.00-if renting a dump trailer from Cook Building Center and dumping yourself. So, about $2500.00. Balance is labor!  These prices are based off retail price! I guessed high on the miscellaneous stuff, most roofing companies will have interchangeable, leftover materials that someone else has paid for that they can use! I got a quote from the roofers that did my cabin for my brother in-law in the cities. They gave me a good deal of $80.00 square for labor only, that's a rocking good price! That's for a 4/12, one story.  I have nothing against a person trying to make a buck! I'm just throwing this information out there, because I love negotiating👍

Edited by CigarGuy
  • Thumbs Up 1
Link to comment
Share on other sites

My 24 x 24 cabin cost $3600.

My 24x28 cabin cost $4200.

Since I had a number of roofs done I got a better deal I paid about $375. a square, Dell you need approximately 10 squares and I wouldn't pay more than $390. a square or about $3900. for the completed job

Link to comment
Share on other sites

All great advice about what the job should cost all things being equal. However, Del will have to figure out if anyone else will bid on the work. If not then $6,600 may be the bid he has to roll with. Hopefully there are others willing to do the work.

 

Another analogy about a friend of mine who is moving. He got three bids from the major moving companies (Mayflower, North American, etc.). To move from Wisconsin to Minnesota the bids were $20k, $15k, and $12k. Estimators and mark-up between all kinds of companies can be vastly different. 

Edited by SkunkedAgain
Link to comment
Share on other sites

I got another bid coming, supposedly.    And there is the brother/in law of the folks next door and his roofer buddy who might do it also.    I'll keep you updated.   Thanks everyone for the input, the 6 grand is a little high sounds like.   Seemed that way to me too.   

Link to comment
Share on other sites

  • 2 weeks later...

Got a second bid.   This one, from Miller's Roofing was 5500.    Got hooked up with a couple of guys, relative of neighbor, and they are gonna do it for 4k.    One is an actual roofer so should be ok.   

  • Thumbs Up 3
Link to comment
Share on other sites

They are done.    Took one day.   Looks good in the pictures they texted me, I'll post some when I get up next week.    If anybody wants their contact info it is Jeff at 218 780 8547     I don't know if they are set up for water access, but I don't think so.     I guess a barge would be involved or a beat up pontoon to haul materials and trash.   

Edited by delcecchi
  • Thumbs Up 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

  • Your Responses - Share & Have Fun :)

    • LakeofthewoodsMN
      On the South Shore...  The focus for many this week is the ongoing deer hunting season which is a big tradition in these parts, even for avid walleye anglers.  There were some that either already harvested their deer or are more into catching fall walleyes than hunting.     Those that are fishing are taking advantage of the unseasonably warm weather and excellent walleye and sauger bite that is happening across the lake.  Cold weather is in the forecast in the upcoming days and weeks so that is also getting many excited. The best depths on the south end of LOW are 22-28 feet of water.     Vertical jigging with frozen emerald shiners is catching most of the walleyes, saugers and jumbo perch.  Depending upon where on the lake you are fishing, some slots and big trophies are in the mix as well, but most reports are talking about good numbers of eaters.    Jumbo perch are coming in good numbers this fall which will serve ice anglers well.  Watch out for an occasional pike or even lake sturgeon mixed in with the walleyes.      There are good numbers of walleyes and saugers across the south shore which is setting up nicely for early ice.   On the Rainy River...  There continues to be good numbers of shiners in the river, and consequently, there are good walleyes in the river as well.     Walleyes along with saugers, pike and some sturgeon are coming in up and down the river.  Most walleyes are being caught in 10-25 feet of water in various stretches of the river.   Jigging with live or frozen emerald shiners is the key. Some anglers are also still slow trolling crankbaits upstream to cover more ground and find fish. Both methods are producing solid results. Sturgeon fishing remains strong.  The catch-and-release sturgeon fishing is open into the spring when it changes to the "keep season" on April 24th. Up at the NW Angle...  As temps are getting colder, most are in the woods hunting and not fall fishing, however, for those who bundle up, fishing continues to be excellent.     A nice mixed bag with walleyes, saugers, perch, pike and crappies being caught. Very good muskie fishing with the colder water temps and shorter days.  Some big fish and some good numbers are being caught amongst the islands.  Both casting and trolling is getting it done.  
    • gimruis
      I hunt in the rifle zone so I don't have a need to use a shotgun to hunt deer, but I would be looking at this if there was ever a need to.   There could be state legislation introduced next summer that eliminates the shotgun zone completely.  It has bipartisan support.  Wisconsin removed theirs years ago and MN is usually later to follow.  They've tried to pass it more than once and it came up just short both times.  Probably just a matter of time.
    • Wanderer
      Oh, h e l l no! 
    • leech~~
      Screw that, here's whatch need!  😆   Power-Shok Rifled Slug 10 Gauge 766 Grain Grain Weight: 766 Shotshell Length: 3-1/2in / 89mm Muzzle Velocity: 1280
    • Wanderer
      20 ga has become a real popular deer round in the last 5 or so years.  The rifled barrels are zinging those sabot slugs with rifle like accuracy out to 100 yards easily.  Some go so far as dialing in for a 200 yard shot but really, by 150 they’re falling off pretty low.   I have a single shot Ultraslug in 20 ga that shoots really well at 100 yards.  Most everyone I know that has bought a slug gun lately has gotten the Savage 220 in 20ga.  Problem can be finding the shells you want.
    • leech~~
      My son always bugs me about getting a nice light over-under 20ga for grouse hunting.  I say Heck no, I'm getting a 3 1/2" 10ga so I can put as much lead in the air that I can!!     So, I'm keeping my 12ga.  
    • 11-87
      That’s almost exactly what I was thinking.  Have slug barrels for both   One for turkey and one for deer.      I have a 20ga mosseberg as well. (Combo came with the scope but never used.   I always liked the 12 better
    • leech~~
      Wanderer is right on the money and covered it well.  I was wondering too if you had a slug barrel for one of your guns?  If so you could make that your slug gun with a scope, and the other your turkey gun with the Red dot.  As you can afford it. 
    • Wanderer
      Kinda depends on if you want magnification or quick target acquisition.   More magnification options and better accuracy with a scope.  You get what you pay for too so get comfortable with a budget for one.  Tasco and Bushnell work but I find they lose their zero easier, have low contrast and don’t gather light well in low light conditions.  That said, I’m still using one I haven’t replaced yet.  Vortex has been the hot brand for the past several years for bang for the buck.  Good products.  Nothing beats Swarovski though.  Huge dough for those.  Burris is another decent option.   There are some specific models for shotgun/slug hunting in the economy brands and bullet drop compensation (BDC) reticles.  Based on experience I’d recommend not falling for that marketing ploy.   Red dots are usually lower magnification and easier to get on target.  Reasonably accurate but don’t do well with definition, like searching the brush for your target.  I put a HAWKE red dot on a .22 for squirrels and it’s been good.  For turkey, that’s probably the route I’d go.     If your slug shots are normally not too far and too brushy, I’d think a red dot could work there too if you’re only buying 1 scope.  You’ll be better off dimming the reticle to the lowest setting you can easily use to not over shine the target and get a finer aim point.   If you don’t have a slug barrel, you might appreciate one of those.  I had a browning with a smoothbore slug barrel that shot Brenneke 2-3/4 inch well.  The 11-87 would well fitted with a cantelever rifled barrel. 
    • 11-87
      Looking for recommendations on scope or red dot    I basically hunt turkey and whitetail, live in southern MN. So it’s all deer/ shotgun    looking to add a scope/ red dot as my eyes don’t work like they used to to with the open sights.    my gun options are 11/87 12. Browning BPS 12    not looking for the most expensive or the cheapest    pros and cons of one over the other
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.