Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

DIY Antler Mounting


DonBo

Recommended Posts

Nice work and great pics DonBo, I do something very similar to this but a lot of your tips/steps will make my next mount a whole lot easier.

Link to comment
Share on other sites

  • 2 weeks later...

This nice piece of barn board made a good coat rack.

DSC02419.jpg

This is a no-brainer for an archery kill.

DSC02421.jpg

Slab wood. If I shot two bucks in the same year I like to put them on the same piece of wood.

DSC01822.jpg

DSC01818.jpg

I know you've seen this. All three came from the same area in So. Dak. three years running.

DSC01816.jpg

A small section of my office wall.

DSC01817.jpg

Thanks for looking at stuff. Please feel free to show off your own and add any tips you may have.

Link to comment
Share on other sites

  • 4 months later...

Here is my method.

I mount every rack we shoot and have shot. Super cheap and super easy.

I cut out a bunch of these wood plaques from a cedar plank and simply sealed them with Thompson deck seal.

My total cost to mount a set of antlers is about $5 when its done.

The cedar plank used was a cull board that was almost free. Beyond that I use batting for the filler you can buy at Walmart. And the felt with the trim is cheap stuff.

Start by simply drilling 2 holes in the skull plate and put 2 screws into the plank.

IMG_0424.jpg

Next I fill the area below the skull plate with the batting. Just cut some chunks and start stapling them down till its filled.

IMG_0425.jpg

Now I cut a piece and lay over the batting I put in and cover over the skull plate.

IMG_0426.jpg

Next is the felt. I have a pattern that I lay over an 8x11 piece of felt and cut that out, then work it around the antlers.

IMG_0427.jpg

Just use a simple stapler and tack it down around the batting and skull plate.

IMG_0428.jpg

IMG_0429.jpg

IMG_0430.jpg

Then I use an exacto knife and trim everything up around it.

IMG_0431.jpg

Next is taking the "trim stuff". I cant remember what its called. smile

Take a hot glue gun and lay a bead around the felt and simply trim things up.

IMG_0432.jpg

Then you have one great looking trophy for the wall for almost NOTHING invested.

IMG_0433.jpg

Link to comment
Share on other sites

IMG_0434.jpg

IMG_0435.jpg

IMG_0436.jpg

IMG_0437.jpg

I do this with everything from spikes up to the non-head mounters.

This happens to be a rack from a deer a friend of ours found dead last year during rifle season. Not my best work, but turned out really good.

Link to comment
Share on other sites

If anyone has some photos of the process or even finished product of shed antlers they have mounted, I'd like to see it. I have two sets of elk sheds I keep meaning to do, and have looked up lots of mounting systems for it, but the cost per set is a little on the high side for me. Some sort of home-brew method would be great to see if anyone here has done it.

Link to comment
Share on other sites

This happens to be a rack from a deer a friend of ours found dead last year during rifle season. Not my best work, but turned out really good.

Quick off topic question. If you find a buck like your friend did, is there any way to keep it without using your only buck tag? Would it be legit to have your wife or someone go get a buck tag? Sure, she didn't shoot it, but neither did you...

Link to comment
Share on other sites

Good thread and good pictures guys!!! I've done some sets of antlers using Donbo's methods but this thread gives me some more ideas - and incentive. I'm behind a few years, too many other projects I guess!!

Link to comment
Share on other sites

  • 2 months later...

Just did this one last night. Friends Sconny buck, so thought it would be fitting to have the green with gold accent.

Started at 7:45, and finished at 9:15.

IMG_0460.jpg

IMG_0461.jpg

Link to comment
Share on other sites

Another one I did recently. I dont honestly like the brown and green combo.... Bleck.

But hey, its antlers.

IMG_0437-1.jpg

IMG_0438.jpg

I have the entire process down to 2 hours or less. This one had the fur still on the skull plate. Total time getting the skull plate cleaned and to the finished product was just over 2 hours.

You guys that use plaster need to start with the batting. Start and finish the entire project in less time than it takes the Twins to beat up on an opponent. laugh

Link to comment
Share on other sites

full-2263-1307-_mg_5588.jpg

full-2263-1308-_mg_5594.jpg

Hard to see from photos but a buddy used a dremmel (sp?) to sand down the skull plates and then attached them to flat granite rocks from where we shot them, lot work but pretty cool '

Link to comment
Share on other sites

Here is the one I finished this spring from the 2008 season. I didn't take any photos of the process but used autobody filler to mold around the skull plate and then wrapped crushed velvet around it. The skull base has two bolts I formed in the autobody filler to attached it to the plaque. I had a local cabinet maker make the plaque. It is walnut with a clear satin finish.

http://i379.photobucket.com/albums/oo235/bhench_photos/Hunting/Nikon026.jpg

http://i379.photobucket.com/albums/oo235/bhench_photos/Hunting/Nikon002.jpg

Link to comment
Share on other sites

what a great thread. I'm going to have to give this a shot and mount some of my antlers I have laying around. Thanks

That's what made me start this. I had boxes of bone laying around the garage. Sorta made me sad to take all those bucks and not show 'em off. Even the little ones have great stories/memories behind them and they all deserve some respect.

Link to comment
Share on other sites

Even the little ones have great stories/memories behind them and they all deserve some respect.

Donbo, I agree, I've saved every rack from every buck that I've ever shot and everyone has a story behind it!!! Two winters ago I took the time and hung everyone of them in my shop. Only about half of them, the older ones, are mounted on plaques but my plan is to one by one get them all mounted on plaques.

I've done mine very similar to the way you described, trimming the skull, round mounting board, plaster of paris. One thing I want to add to my plaques is a notation like 'Bow 94' or 'Gun 02', haven't decided whether to get little plates or use a wood burner.

Link to comment
Share on other sites

One thing I want to add to my plaques is a notation like 'Bow 94' or 'Gun 02', haven't decided whether to get little plates or use a wood burner.

Good plan. I write that info on the back of the plywood used to mount the skull plate. It doesn't show, but the record is there.

Link to comment
Share on other sites

  • 1 month later...

Time to bump this again with the season finally here.

Congrats to those of you who've scored already!

Link to comment
Share on other sites

Hey Elwood, nice bucks! Those metal tags are still used in Wisc after you register your deer. I think they are kind of cool momentoes of the hunt.

Tunrevir~

Link to comment
Share on other sites

  • 1 month later...

Hey DonBo - got my first buck this year and followed your treatment (except used batting rather than plaster) and I think I turned out pretty darn good. I know it's a small set but I was my first set

so I had to mount them. Also tried mounting a pheasant tail (I know, I know this isn't' the pheasant forum). Got another tail I'm planning on mounting soon. This is my first venture into amateur taxidermy. Whaddya think folks?

full-19118-4370-imag0039x.jpg

full-19118-4371-imag0038.jpg

Link to comment
Share on other sites

i recently did 3 bucks that i had laying aroung from many years ago. to put the form around my skull plates i used crayola modeling clay. it isn't runny, it's easy to mold, and if you get some where it doesn't belong all you have to use is water to wash it away. it's very cheap and is available pretty much anywhere. i picked mine up from the school supply section area in wal-mart.

Link to comment
Share on other sites

jw, congrats on that first deer. No nead to appologize for the size. That first one will be remembered with pride for a lifetime. Every buck taken deserves that same respect and an antler mount is a great way to show them off.

I love the fact you added the shell. I'm working on one right now that's a young man's first deer also. That will also have the shotgun shell AND the slug that his Dad found along with a photo. I'll be sure to add pics when it's done.

You've done a fine job, congrats and thanks for sharing.

Link to comment
Share on other sites

DonBo - Thanks man! I wouldn't have been able to do without your post!

Here's the 2nd pheasant tail I did and their final spot in the house:

full-19118-4384-imag0046x.jpg

full-19118-4385-imag0043x.jpg

Link to comment
Share on other sites

full-1946-4399-2008_11150006.jpg

full-1946-4400-2009_11200016.jpg

full-1946-4401-2010_01230002.jpg

The first is my first bigger buck,an eight point, shot 11-09-08. I used twine to wrap the antler base, a cabinet door for the backboard, and found a clock that I could disassemble and mount to the cabinet. The second, a nine point, was taken the next year, to the day, on 11-09-09. I used the twine again and found a weather station to mount. The boards came from my deer stand, which was destroyed by someone a day or two before the season began. The third one belongs to my cousin's father-in-law. He asked me to come up with something. I liked the rustic look of the twine and found a oak slab in my uncle's wood pile. I made the frame so he could add the picture of the deer on the day he got it.

Link to comment
Share on other sites

Here are the small bucks my Pop's and I got last season (09) The one on the left was my first and first with a bow. Dad got his during the tail end of the rifle season.

Best part of these is the leather I used was from a deer hide my Grandpa tanned himself years ago.(He died when I was very young and my mother had it stashed away).

full-7782-4477-0509001531a.jpg

Here's my first attempt at a Euro mount on the nice buck my dad got during the 07 season. Turned out nice, I think.

full-7782-4478-img_0360.jpg

full-7782-4479-img_0359.jpg

Link to comment
Share on other sites

Love the euro mount. Did you bleach the skull yourself?

Here's my latest.

DSC02712.jpg

The photo was glued to the plaque, then bar-top varnish was poured over the whole thing. The slug/shell was set into the varnish while still wet, then the antler mount was screwed into place later. Nice trophy for this young man's first deer huh?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Your Responses - Share & Have Fun :)

    • gimruis
      I hunt in the rifle zone so I don't have a need to use a shotgun to hunt deer, but I would be looking at this if there was ever a need to.   There could be state legislation introduced next summer that eliminates the shotgun zone completely.  It has bipartisan support.  Wisconsin removed theirs years ago and MN is usually later to follow.  They've tried to pass it more than once and it came up just short both times.  Probably just a matter of time.
    • Wanderer
      Oh, h e l l no! 
    • leech~~
      Screw that, here's whatch need!  😆   Power-Shok Rifled Slug 10 Gauge 766 Grain Grain Weight: 766 Shotshell Length: 3-1/2in / 89mm Muzzle Velocity: 1280
    • Wanderer
      20 ga has become a real popular deer round in the last 5 or so years.  The rifled barrels are zinging those sabot slugs with rifle like accuracy out to 100 yards easily.  Some go so far as dialing in for a 200 yard shot but really, by 150 they’re falling off pretty low.   I have a single shot Ultraslug in 20 ga that shoots really well at 100 yards.  Most everyone I know that has bought a slug gun lately has gotten the Savage 220 in 20ga.  Problem can be finding the shells you want.
    • leech~~
      My son always bugs me about getting a nice light over-under 20ga for grouse hunting.  I say Heck no, I'm getting a 3 1/2" 10ga so I can put as much lead in the air that I can!!     So, I'm keeping my 12ga.  
    • 11-87
      That’s almost exactly what I was thinking.  Have slug barrels for both   One for turkey and one for deer.      I have a 20ga mosseberg as well. (Combo came with the scope but never used.   I always liked the 12 better
    • leech~~
      Wanderer is right on the money and covered it well.  I was wondering too if you had a slug barrel for one of your guns?  If so you could make that your slug gun with a scope, and the other your turkey gun with the Red dot.  As you can afford it. 
    • Wanderer
      Kinda depends on if you want magnification or quick target acquisition.   More magnification options and better accuracy with a scope.  You get what you pay for too so get comfortable with a budget for one.  Tasco and Bushnell work but I find they lose their zero easier, have low contrast and don’t gather light well in low light conditions.  That said, I’m still using one I haven’t replaced yet.  Vortex has been the hot brand for the past several years for bang for the buck.  Good products.  Nothing beats Swarovski though.  Huge dough for those.  Burris is another decent option.   There are some specific models for shotgun/slug hunting in the economy brands and bullet drop compensation (BDC) reticles.  Based on experience I’d recommend not falling for that marketing ploy.   Red dots are usually lower magnification and easier to get on target.  Reasonably accurate but don’t do well with definition, like searching the brush for your target.  I put a HAWKE red dot on a .22 for squirrels and it’s been good.  For turkey, that’s probably the route I’d go.     If your slug shots are normally not too far and too brushy, I’d think a red dot could work there too if you’re only buying 1 scope.  You’ll be better off dimming the reticle to the lowest setting you can easily use to not over shine the target and get a finer aim point.   If you don’t have a slug barrel, you might appreciate one of those.  I had a browning with a smoothbore slug barrel that shot Brenneke 2-3/4 inch well.  The 11-87 would well fitted with a cantelever rifled barrel. 
    • 11-87
      Looking for recommendations on scope or red dot    I basically hunt turkey and whitetail, live in southern MN. So it’s all deer/ shotgun    looking to add a scope/ red dot as my eyes don’t work like they used to to with the open sights.    my gun options are 11/87 12. Browning BPS 12    not looking for the most expensive or the cheapest    pros and cons of one over the other
    • SkunkedAgain
      That's good news. I haven't seen any ice in Black Bay yet, but it looks like the small bays should start to freeze up this weekend. Hopefully we make some ice next week.   Below is the forecast for Cook. We should have temps mostly below zero . The bottom section below shows that it should not be windy, and no snow is predicted. All good signs for making ice.  
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.