Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

Power Loading


Recommended Posts

There are people that can power load if you choose to call it that, that can load without doing any damage.

We cannot ban them nor can we ban the folks that are either rude or take forever at the landings. People just need how to do things right.

Link to comment
Share on other sites

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

  • slotlimit

    6

  • katoguy

    5

  • lots of luck

    4

  • BobT

    4

Quote:

Maybe we need to put a ban on bunk trailers!!! People have the $25,000- $30,000 for the boat, but I guess the roller trailer is just a little tooo expensive?


For me it was not a matter of cost. I like my boat sitting on a couple of 12 foot long, 8 inch wide bunks. I do not "powerload" my boat I simply drive it onto those bunks. AND, when I am out alone I can back it down the ramp and get it off the trailer by myself and never have to get out of the truck at the bottom of the ramp to release the saftey chain either. Take care and N Joy the Hunt././Jimbo

Link to comment
Share on other sites

When a person power loads you have to use a little common sense and respect the landings if you are going to power load. I do it because it's alot faster and you don't have guys on your tail saying hurry up what taking so long.

Link to comment
Share on other sites

Quote:

Maybe we need to put a ban on bunk trailers!!! People have the $25,000- $30,000 for the boat, but I guess the roller trailer is just a little tooo expensive?


Sorry, I should have mentioned it is a 1990. smirk.gif

A new custom roller trailer for the boat would cost nearly what I paid for it. Granted I would love to have a roller.

I have bent two winch posts just pulling it up the last few inches.

Link to comment
Share on other sites

I have a drive on bunk trailer, very smooth. The quickness in which I get off the water is greatly appreciated by the people waiting in line at the ramp! No need to power load if it's set up right!

Link to comment
Share on other sites

Quote:

Maybe we need to put a ban on bunk trailers!!! People have the $25,000- $30,000 for the boat, but I guess the roller trailer is just a little tooo expensive? Next I can here some say that a roller trailer is not available for my boat.

Powerloading COSTS all of us more for maintenance of our landings. Use your brain. Get the right trailer not just the cheapest trailer.


For me a bunk trailer is the right trailer and most would agree. It is a drive on, drive off trailer and designed that way...not to mention they support your boat much better....especially fiberglass types. And I don't think a roller trailer is more expensive than a bunk. Don't see many fiberglass boats on a rollers...

As mentioned earlier, backing the trailer far enough down can make driving on a lot easier. The problem right now is the water level of many of the lakes around this area is low and you're basically horizontal when unloading and loading because you have to back in so far just to get the boat to float. When that happens you gotta give it some throttle to drive on or drive off because you don't have gravity helping you at all. Most fiberglass and bunk trailer combos are not meant for cranking on...they don't slide well on the carpet. Mine hasn't been too bad so far and I usually get it to about a foot of the bow roller and then crank the rest of the way.

Bottom line is if the landings were decent to begin with, powerloading wouldn't be as big of an issue even with the lower water levels. They are flat and not real user friendly. If they had more angle to them the boats would float off nice and likewise you could drive much further to the front of the trailer before it starts to touch the rollers or bunks. The landings were not built well.

Link to comment
Share on other sites

I wasn't really suggesting that we need more laws. I meant my comment as a figure of speech but you are correct that we don't need more government interference. Thanks for pointing that out.

Bob

Link to comment
Share on other sites

Quote:

Maybe we need to put a ban on bunk trailers!!! People have the $25,000- $30,000 for the boat, but I guess the roller trailer is just a little tooo expensive?


Actually Glass boats are 40 to 50 thousand.

And you wouldn't want to put one on a roller trailer.

Are we clear? grin.gif

Link to comment
Share on other sites

Bottom line is if the landings were decent to begin with, powerloading wouldn't be as big of an issue even with the lower water levels. They are flat and not real user friendly. If they had more angle to them the boats would float off nice and likewise you could drive much further to the front of the trailer before it starts to touch the rollers or bunks. The landings were not built well.

Like I stated before i used to work for the DNR building these ramps. The lake bottom is what determines how steep the ramp is. You can only dig them down as thick as the cement slab being put in. If you dig them down say 2 more feet they will just be filled back in by the dirt in the lake. So if the lake drops off quick from the shore then you can have a nice steep ramp and vice versa. So don't blame the DNR. Blame the lake.

Link to comment
Share on other sites

Quote:

If you dig them down say 2 more feet they will just be filled back in by the dirt in the lake.


If a landing that was dug out to make it deeper fills in by dirt from the lake, then why don't the powerloading holes fill in every year?

When I say the landings weren't built very well, I mean the entire access location isn't good...not just the landing itself. Seems odd why pretty much every one around here is on the east and south sides of the lakes....the side the prevailing winds blow into. Just bad luck I guess. smirk.gif

But I still believe if a little thought and work were given to the landings they could be better. Most of them could use some TLC to bring them back into shape again.

Link to comment
Share on other sites

I think they are trying to make them better, now instead of 1 foot cement slabs to build and extend the ramps they are using 5 foot slabs which should stay in place a lot better.

Link to comment
Share on other sites

its useless debating the powerloading issue people that powerload they think everything is just great and it doesnt cause any harm to boat launches so thats cool everybody keep on powerloading!!!! im going to try it this weekend and see what all the hype is all about

Link to comment
Share on other sites

MN Vik- First off... not all landings are the same. Those with deeper water there I feel have little to no affect to powerloading. Its the shallow landings that the power loading causes problems. I suppose we could also start a thread about shorline destructin from people making waves as well?

Link to comment
Share on other sites

Quote:

Quote:

If you dig them down say 2 more feet they will just be filled back in by the dirt in the lake.


If a landing that was dug out to make it deeper fills in by dirt from the lake, then why don't the powerloading holes fill in every year?

When I say the landings weren't built very well, I mean the entire access location isn't good...not just the landing itself. Seems odd why pretty much every one around here is on the east and south sides of the lakes....the side the prevailing winds blow into. Just bad luck I guess. smirk.gif

But I still believe if a little thought and work were given to the landings they could be better. Most of them could use some TLC to bring them back into shape again.


During the summer people are constantly power loading on the lake and it keeps the dirt out of that hole. If it was left alone all summer the hole would fill in. Maybe not the whole way but it would be much less. Now if you dug them deeper it would still leave a hole and the rest of it would fill in.

You are also right about selecting the location. But A lot of the times the DNR has no choice on where to build they have to buy the land they can get someone to sell.

Yes the accesses could use some TLC. Like I said before I was incharge of fixing the power loading holes before. I enjoyed it but no one else I worked with liked this job so now in the kandiyohi area I'm sure it goes by the wayside. Once I would fix the problem it would take years for it to happen again. I have no problem with the power loading....it always kept me busy.

Link to comment
Share on other sites

May be we should just ban bass fishing and bass boats. They are the power loading crowd. grin.gif Just joking Deitz!

I have never heard this topic brought up any were before. I have noticed it at landing and that’s about all. Now I am hearing this topic last Sun. on the way down to city's catfish on Bear azz'z and Fish nuts (mark and larry). I think it all started here. Cool! Next thing ya know they will make a law about it and FM will be the starting point of the whole thing. I have stated my standings on this issue many posts ago.

Just thought I would mention it was a topic on a radio show last weekend.

Link to comment
Share on other sites

Make the ramp deep enough and people wouldn't need to "powerload".

It will take much more then a summer or two of not powerloading at a certain spot for that hole to fill in.

My cabin is a great example; we used to power load at our property every weekend before we got a boatlift. That was 11 years ago. The blowout hole is still 3 feet deeper then the water around it.

Link to comment
Share on other sites

on the positive side the blow out hole is a great spot for fish!

Link to comment
Share on other sites

Quote:

Maybe we need to put a ban on bunk trailers!!! People have the $25,000- $30,000 for the boat, but I guess the roller trailer is just a little tooo expensive? Next I can here some say that a roller trailer is not available for my boat.

Powerloading COSTS all of us more for maintenance of our landings. Use your brain. Get the right trailer not just the cheapest trailer.

I would like to see the DNR ban powerloading and ENFORCE it. At least then the people wrecking the landing would be paying to repair the landing.


Your not serious? laugh.gif You may want to educate yourself on glass boats and trailer types. I had a Ranger Z22 Comanche with a 300 horse on order until I found out I could not get that with a roller trailer. Then I walked. laugh.gif

Link to comment
Share on other sites

Quote:

on the positive side the blow out hole is a great spot for fish!


Even better swimming conditions at the end of ramp on a busy Saturday. laugh.gif

Link to comment
Share on other sites

Quote:

Quote:

on the positive side the blow out hole is a great spot for fish!


Even better swimming conditions at the end of ramp on a busy Saturday. laugh.gif


I have seen that several times!

Link to comment
Share on other sites

Quote:

Maybe we need to put a ban on bunk trailers!!! People have the $25,000- $30,000 for the boat, but I guess the roller trailer is just a little tooo expensive? Next I can here some say that a roller trailer is not available for my boat.

Powerloading COSTS all of us more for maintenance of our landings. Use your brain. Get the right trailer not just the cheapest trailer.

I would like to see the DNR ban powerloading and ENFORCE it. At least then the people wrecking the landing would be paying to repair the landing.


WOW! You mouse jocky's crack me up. I own a Z20 Ranger and a 621 Ranger and you wouldn't want them on any thing but bunks. They don't offer your "more expensive" roller trailers for a reason..!

Link to comment
Share on other sites

My 2 cents: Guys will reel in fish all day long but refuse to crank the boat on to the trailer? That's just lazy! There's a reason the rope/strap on the winch is as long as the trailer.

Link to comment
Share on other sites

cranking a glass boat is not quite as easy as reeling in sunnies.

Link to comment
Share on other sites

the dnr is changing the way they put in the cement they are going to 5 ft long slabs instead of the 1ft and are going out as far as 30ft on some. there are some lakes with a deep enough drop off that power loading has no effect on. It is only a problem on the shallow ones.

Link to comment
Share on other sites

  • 'we have more fun' FishingMN Creators

If power loading can be done without washing out the landing then go for it. I've seen it done where the boat is idled onto the trailer. Then again I've see boats driven up a trailer that required a heck of a lot of thrust to do that. Have you ever seen treasure hunters using power dredging done with a ships props and funnel in the ocean?

When I see someone power loading at high RPMs I wonder how the heck they got the boat off the trailer? Seems to me they need to back the trailer in the water a little bit more. How can you regulate common sense. I can't imagine the stress thats getting put on the transom and hull while shooting a roster tail to get the boat pushed up a trailer.

The thought that roller trailers don't offer the support that bunks do isn't true. A bunk is only supported where theres a mount. Take a 18' 2x8, support it on both ends then stand in the middle. I think you get the picture.

My 25' Saratoga had a roller trailer and never had a problem with support. The boat rolled off and on nicely so size isn't an issue.

Link to comment
Share on other sites

Surface Tention,

Good point! Well stated and you give valid points.

The only time I have ever heard of a roller trailer causing a problem (never seen one), is when one of the rollers comes off (some how) and person did not notice when unloading or loading. Besides that rollers work great. I would like to have them on my trailer, but I have bunks and a power winch. I really make it simple with remote pull string and possibly wireless in future.

Link to comment
Share on other sites

Quote:

cranking a glass boat is not quite as easy as reeling in sunnies.


I watched a guy hand crank a Seaswirl Striper 2301DC (might have been a 2101) up on Forest Lake last night. He managed without breaking a sweat.

Nice boat.

Also, for those that think your bunk supports full length, slide a credit card in between the glass and the bunk support. You'll find it only supports near the bunk brackets.

I've had glass up to 21 feet on both bunk and roller. You can crank up both if you dip your bunks. There is nothing wrong with driving it on a trailer - UNLESS - you are the (Contact Us Please) blasting it up.

Tim

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.



  • Your Responses - Share & Have Fun :)

    • leech~~
      Losing to a 2-7 team at the half!!  
    • JerkinLips
      41.6°F in Stuntz Bay Thursday morning.  Left my boat in the water to hopefully fish more before the lake freezes.  Caught four 9-11" walleyes in 2½ hours before I gave up due to the strong west wind.  Water level has not gone up more than a couple of inches at the most.  May be a good winter to jack my boathouse out of the water on the deep end.
    • Troy Smutka
      The calendar migrators from the Dakotas have been passing through central MN in trickles the past few weeks, and the recent cooler weather has some Canada ducks starting to show up. We have been harvesting mallards, pintails, gadwalls, wigeon, shovelers, greenwing teal, canvasbacks, redheads, bluebills, and ringnecks in decent numbers.
    • SkunkedAgain
      It doesn't look like the lake level has gone up at all. I was up a week ago and struggled to get my boat in and out of the public landing on the west end of Head O Lakes. I used my paddle to push the boat further out to deeper water. I could hear the hull moving over the sandy/muddy bottom near the launch.
    • JerkinLips
      Pretty tough.  Was catching about 2 walleyes per hour and the biggest was only 13".  Back up Thursday so I hope I have better success.
    • smurfy
      the kid and I always check our stands prior.......i'll go back to check the conditions of said stands before he gets there to see what we need. while i'm at it if i can i shoot at grouse with shells that appear to not have bb,s in them!!!!🙄
    • LakeofthewoodsMN
      On the South Shore...  With unseasonably warm weather, there are still some anglers hitting the water and most have been rewarded.  Limits of walleyes and saugers being caught, and the forecast looking ahead is favorable. The best bite on the south end of LOW has been in 22-28 feet of water. Water temperatures are dropping and as the temps cool further, the bite has been excellent.     Vertical jigging with frozen emerald shiners has been the program for most anglers.  Bring plenty of bait, as you’ll need to sort through some smaller fish and short biters.  Plenty of eater fish to be had, just have to do a bit of sorting.  Anglers are also reporting very good numbers of jumbo perch and occasional pike mixed in with the walleyes.     For those fishing structure, if you slide up on top of a rock pile, don't be surprised to catch a big smallmouth bass, there are plenty around.   This week’s hot colors have been gold, gold/glow white, gold/chartreuse, gold/orange, and gold/glow white/pink.     One tip, a stinger hook on your jig will catch you more fish if you start missing too many fish. On the Rainy River...  Bait dealers are reporting good numbers of shiners in the river this past week.  Interesting, each night is different.  Some areas have the small shiners called pinheads.  Other areas have the larger minnows.     The river is producing some nice walleyes in various spots from Four Mile Bay to Wheeler's Point, to Baudette all the way to Birchdale.  There are 42 miles of navigable Rainy River from the mouth to Birchdale with plenty of public boat ramps along the way.     Walleyes are being caught in various depths, but 15-25 feet of water has been good.   Jigging with live or frozen emerald shiners has been highly effective. Some anglers are also trolling crankbaits to cover more ground and find fish. Both methods are producing solid results. Sturgeon fishing has been strong.  The catch-and-release sturgeon fishing is open into the spring when it changes to the "keep season" on April 24th. Up at the NW Angle...  Fall fishing continues to be excellent. Points, neck-down areas with current, shoreline breaks, and transition zones from rock to mud are all productive locations for walleye right now.   It is traditionally a mixed bag up around the many islands in this part of the lake and this fall is no different.  In addition to walleyes, pike, jumbo perch, and crappies are in the mix.  A jig and minnow has been the most effective presentation. Good muskie fishing is the norm during the fall of the year and area reports have been good.  In addition to casting, trolling shorelines, points and neckdown areas has been effective.  Muskies are often targeting schooling tullibees this time of year. The weather forecast for the next couple of weeks is conducive for fall fishing.  If you don't deer hunt, or if you have harvested your deer, consider some bonus walleye action before the ice forms.  The bite continues to be excellent.    
    • leech~~
    • gimruis
      I'm not one to leave that to chance the day I need it.  I always check on my stands prior to the season.  Just like I always shoot my rifle before the season and I always run my outboard motor before fishing opener.  Too many things to go wrong without confirming it ahead of time.   I guess it could have been beavers but the house itself didn't appear nearly big enough along one ditch.  It was about the size of chair.  I've seen beavers houses many times before and they appear much bigger than that.
    • leech~~
      Good thing you made a check run.  That would have really suked walking into opening day.  Why do you think muskrats and not beavers?  
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.