• RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
sakazulu

Lund boat covers?

Recommended Posts

sakazulu

My original Lund cover served me well! I would like an original replacement for my 1995 1660 Pro-V tiller. The old cover has Lund stamped on the bow. I was wondering if ANY if these still exist or I gotta go custom fit thru aftermarket. Thanks!

Share this post


Link to post
Share on other sites
iffwalleyes

I would check with the canvas shops as you will get a much better fitting cover than what you had. But with that you shold still be able to get one that will fit your boat though a dealer.

Share this post


Link to post
Share on other sites
CabinBoy

You could check with Shoremaster Fabric in Fergus Falls. They make most if not all of Lund's cover's for their boats.

Share this post


Link to post
Share on other sites
Valv

I used to sell them last year for $ 50.00 each (OEM Lund), now I am out of them, your best bet is a canvas shop or Lund itself.

Share this post


Link to post
Share on other sites
cold one sd

My last boat was a 93 Starcraft and I bought a custom cover from Shoremaster Fabrics. It fit like a glove. My new boat is an 06 Lund 1800 Fisherman and it has a custom cover from Shoremaster Fabrics. It fits like a glove also. They make a lot of covers for Lund but they are cheaper through Shoremaster.

Share this post


Link to post
Share on other sites
Gissert

Another vote here for Shoremaster Fabrics, excellent company and products.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • CigarGuy
      Was out for a while on the Partridge River this afternoon, didn't have any minnows, managed one 13" crappie on Gulp waxes.  But, the old Strikemaster almost bottomed out-close to 30" of ice.
    • SkunkedAgain
      I don't know what your Helix 7 requires in the manual, but a quick look would figure out if that 3amp is too small. Definitely wire your sonar to the motor battery using the correct gauge wire and fuse. If you connect it to another battery, it should be a stand-alone. Connecting to the trolling motor battery will generate interference.
    • SkunkedAgain
      I've done cheeks quite a few times and they are always good. They take only a few seconds to carve out. I like to get the most out of the things I kill to eat, so I'm not afraid to pull them out of smaller ones. I'm glad to see that so many people picked up a new tip. That's the point of congregating on these forums. I wonder how many non-registered folks will read this and learn something new.
    • CigarGuy
      I've been doing them for many years.  Like Cliff, a friend who was a guide on LOW brought some out prior to the main course-been doing it since. 
    • Tom Sawyer
      With the snow cover completely gone and lots of standing water, 60s in the forecast, with plenty of sunny days next week, and a good chance of rain mid-week; this may be my last weekend on the ice, South of Hwy 210 anyway . Fish have really been on the chew
    • Alex wilhelmi
      hey guys..i installed the helix 7. took it out the other day. it keeps  randomly shutting down, with the motor off it will stay on no problem. Heres where i think i f'd up. i used the same 3 amp fuse harness from the old sonar that came with the boat, the old hb depth only kind. its wired right to the ignition wire. i used the correct gauge wire where i needed it. im guessing its not getting enough juice? also if i wired it direct to a separate battery, how do i go about hooking up and on board charger? or would i be ok just wiring direct to the battery that runs the motor? thanks for any advice. those musky lures look so bad ass! nice work !!
    • delcecchi
      Really small scallops
    • delcecchi
      I think it is a matter of the material involved.   Ethanol can corrode some metal and dissolve some organic stuff like rubber or plastic that gasoline doesn't affect.   Or so some sources say.     
    • Tom Sawyer
      I guess I was being to kind. Nah nah nah nah, ....Turn out the lights already. LMAO!How Disappointing. Wolves your next......
    • ProGuideEyes
       Did you leave vermilion Tom???