Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • 0

Blades the same?


Dave S

Question

I had a Strikemaster Laser 8" hand auger and put the adapter on it to use a drill. Well, as luck would have it, the adapter twisted off and now Lake Koronis acquired my auger. I just bought new blades which I haven't put on luckily.

 

Does the Laser hand auger use the same blades as the new Lite Flite auger? Figured if I have to replace the auger, I'd go with the new bit.

  • Wow, ❤ 1
Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 1

To answer your question, unfortunately  no. The lazer hand auger blades are just a plain straight edge lazer style blade where the power auger bits/ lite flites are a serrated ( groves in blades on edges). Two totally different blades. 

  • Thanks 1
Link to comment
Share on other sites

  • 0
  • 'we have more fun' FishingMN Builders
20 minutes ago, Dave S said:

I had a Strikemaster Laser 8" hand auger and put the adapter on it to use a drill. Well, as luck would have it, the adapter twisted off and now Lake Koronis acquired my auger. I just bought new blades which I haven't put on luckily.

 

Does the Laser hand auger use the same blades as the new Lite Flite auger? Figured if I have to replace the auger, I'd go with the new bit.

 

Wow, that stinks.  ?

Please mark the hole with your cell GPS.  When I go there some day to try out the lake I'll fish it out with the big magnet I have and what ever fish I can pull out too!  ?

Link to comment
Share on other sites

  • 0
9 hours ago, AlwaysFishing23 said:

To answer your question, unfortunately  no. The lazer hand auger blades are just a plain straight edge lazer style blade where the power auger bits/ lite flites are a serrated ( groves in blades on edges). Two totally different blades. 

 

If that's the case, I'll either need to decide to get a new hand auger or I buy the new Lite Flite. If I choose the latter, I have a set of new blades for an 8" with no use. If I opt for the new hand auger, I'll make a new adapter myself with a larger hex than the 3/8" and stronger steel. Probably stainless. Can't believe the darn thing twisted right off without breaking an arm first.

All that said, cutting edge is one thing. There is a curvature to the blades and a specific angle for cutting properly. That was the main point of my question. Not too concerned either way at this point I guess. 

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • mulefarm
      With the early ice out, how is the curlyleaf pondweed doing?
    • LakeofthewoodsMN
      On the south end...   The big basin, otherwise known as Big Traverse Bay, is ice free.  Zippel Bay and Four Mile Bay are ice free as well.  Everything is shaping up nicely for the MN Fishing Opener on May 11th. With the walleye / sauger season currently closed, most anglers are targeting sturgeon and pike.  Some sturgeon anglers are fishing at the mouth of the Rainy River, but most sturgeon are targeted in Four Mile Bay or the Rainy River.  Hence, pike are the targeted species on the south shore and various bays currently.   Pike fishing this time of year is a unique opportunity, as LOW is border water with Canada, the pike season is open year round. The limit is 3 pike per day with one being able to be more than 40 inches. All fish 30 - 40 inches must be released. Back bays hold pike as they go through the various stages of the spawn.  Deadbait under a bobber, spinners, spoons and shallow diving crankbaits are all viable options.   Four Mile Bay, Bostic Bay and Zippel Bay are all small water and boats of various sizes work well. On the Rainy River...  Great news this week as we learned sturgeon will not be placed on the endangered species list by the U.S. Fish and Wildlife Service.     The organization had to make a decision by June 30 and listing sturgeon could have ended sturgeon fishing.  Thankfully, after looking at the many success stories across the nation, including LOW and the Rainy River, sturgeon fishing and successful sturgeon management continues.   A good week sturgeon fishing on the Rainy River.  Speaking to some sturgeon aficionados, fishing will actually get even better as water temps rise.     Four Mile Bay at the mouth of the Rainy River near the Wheeler's Point Boat Ramp is still producing good numbers of fish, as are various holes along the 42 miles of navigable Rainy River from the mouth to Birchdale.   The sturgeon season continues through May 15th and resumes again July 1st.   Oct 1 - April 23, Catch and Release April 24 - May 7, Harvest Season May 8 - May 15, Catch and Release May 16 - June 30, Sturgeon Fishing Closed July 1 - Sep 30, Harvest Season If you fish during the sturgeon harvest season and you want to keep a sturgeon, you must purchase a sturgeon tag for $5 prior to fishing.    One sturgeon per calendar year (45 - 50" inclusive, or over 75"). Most sturgeon anglers are either a glob of crawlers or a combo of crawlers and frozen emerald shiners on a sturgeon rig, which is an 18" leader with a 4/0 circle hook combined with a no roll sinker.  Local bait shops have all of the gear and bait. Up at the NW Angle...  A few spots with rotten ice, but as a rule, most of the Angle is showing off open water.  In these parts, most are looking ahead to the MN Fishing Opener.  Based on late ice fishing success, it should be a good one.  
    • leech~~
      Nice fish. I moved to the Sartell area last summer and just thought it was windy like this everyday up here? 🤭
    • Rick G
      Crazy windy again today.... This is has been the norm this spring. Between the wind and the cold fronts, fishing has been more challenging for me than most years.  Panfish have been moving in and out of the shallows quite a bit. One day they are up in the slop, the next they are out relating to cabbage or the newly sprouting lilly pads.  Today eye guy and I found them in 4-5 ft of water, hanging close to any tree branches that happened to be laying in the water.  Bigger fish were liking a 1/32 head and a Bobby Garland baby shad.   Highlight of the day way this healthy 15incher
    • monstermoose78
    • monstermoose78
      As I typed that here came a hen.  IMG_7032.mov   IMG_7032.mov
    • monstermoose78
      So far this morning nothing but non turkeys. 
    • monstermoose78
      Well yesterday I got a little excited and let a turkey get to close and I hit the blind!!
    • smurfy
      good......you?? living the dream..in my basement playing internet thug right now!!!!!! 🤣 working on getting the boat ready.......bought a new cheatmaster locator for the boat so working on that.   waiting for warmer weather to start my garden!!!
    • monstermoose78
      How is everyone doing? Holy moly it’s chilly this morning I stayed in bed and will hunt later today when it warms up.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.