Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

Remington 700 Lawsuits and such.


Recommended Posts

So I really don't pay much attention to the big news lawsuits that pop up in the news from time to time. But after an incident I had during opening weekend, I've become more aware of this one.

On opening day we were returning to woods after pulling a couple animals out.

I was holding my Rem 700 in my left hand with the butt of the stock resting on my right leg as I inserted 3 rounds into the magazine. I pushed the bolt handle closed as you normally would. As I rotated and locked the bolt with my right hand the rifle discharged into the air. My hands never left either the stock or the bolt handle.

Afterward, was did more research on this issue with the 700s and it shows the connector in the bolt and stick which has been causing this type AD in older models of the rifle.

I just to drop a word to everyone to be safe and watch your muzzle direction at all times.

In this case, I had 3 persons within 10-15 feet of myself when this happened. Luckily the only issue, besides everyone needing to clean out their pants, was the muzzle was no more than 18" from the side of my head when it discharged. I'm just now getting partial hearing back in my left ear.

Link to comment
Share on other sites

Yes, as one learned long ago in gun safety and from my father, one always needs to keep the muzzle pointed in a safe direction as one never knows what could happen.

Glad to hear all are ok.

Link to comment
Share on other sites

Good thing you had your muzzle pointed in a safe direction. I wonder if Remington will ever admit to there defective trigger in 700 model.

Link to comment
Share on other sites

The professionals that have said they have a bad trigger have testified in court that its not a defective trigger. They say that people do not clean the trigger assembly and that some change the trigger pull. Thats what been stated in court.

I personally own 8 of these guns and have used them for many years with not one issue. I have no fear of them at all.

I get a kick out of the people that say sue, sue, sue. That seems to be the new American way, say it's another s fault and then sue them.

Link to comment
Share on other sites

CNBC had a recent special on this issue. Quite eye opening. They replay it once in a while and it might be worth watching.

Link to comment
Share on other sites

Harvey, the military and police snipers have had this same problem, they keep their stuff really clean

Link to comment
Share on other sites

Harvey, the military and police snipers have had this same problem, they keep their stuff really clean

And they all adjust their triggers.

Link to comment
Share on other sites

I'm not saying sue. I'm saying be safe.

I have 4 - 700s and I haven't had any issues in the past. Matter of a fact I will still buy more of them.

It's not a dirty action. I have spoken to buddies on local SWAT teams and they have had issues with theirs as well.

Link to comment
Share on other sites

So Tator2k, have you or the swat guys heard of any permanent fix? I don't want my 700 to go off when I am not pulling the trigger! I have thought of putting a timiney trigger assembley in but I believe that trigger was based on the 700's. In all honesty I don't know if I trust Remington to FIX IT.

Link to comment
Share on other sites

I read the following on a different forum. I would call Remington to verify before completing.

Safety Modification Program

Remington Model 700 & Model 40-X

If you own a Remington Model 700 or Model 40-X rifle:

Only those Model 700 or 40-X rifles made before March 1982 were manufactured with a bolt-lock mechanism. Model 700 or 40-X rifles made after March 1982 do not have a bolt-lock mechanism and may be loaded and unloaded with the safety in the “S” or “On Safe” position. Consequently, post-1982 Model 700 or 40-X rifles are not subject to this bolt-lock Safety Modification Program.

To determine whether your Model 700 or 40-X rifle has a bolt-lock mechanism, either:

• Call Remington toll-free at 1-877-387-6691 and a service representative will help you determine if your firearm has a bolt-lock mechanism, or

• Take your Model 700 or 40-X rifle to a Remington Authorized Repair Center and a qualified gunsmith will examine your firearm and determine whether it has a bolt-lock mechanism.

If your Model 700 or 40-X rifle has a bolt-lock mechanism, it is eligible for this bolt-lock Safety Modification Program. If you participate, your firearm will be cleaned and inspected for proper functioning by a qualified gunsmith. Once the condition of your firearm has been assessed, you will be notified of one of the following:

• Your firearm’s trigger assembly is otherwise in good operating condition, and the gunsmith will proceed to physically remove the bolt-lock feature so that your rifle can be loaded and unloaded while the safety remains in the “S” or “On Safe” position; or

• Your rifle’s trigger assembly is found to be in an unsatisfactory or potentially unsafe operating condition because of any number of factors, including wear, alteration or maintenance. The entire trigger assembly will be replaced with a new factory trigger assembly, which does not incorporate a bolt-lock mechanism.

In either case, the total cost to you is $20 plus shipping and handling. You will also receive a safety redemption certificate to complete and submit in order to receive a free blaze orange hat (one hat per certificate).

How to participate in the Safety Modification Program

Complete the General Repair Form and

Send or deliver your firearm and the completed repair form to either:

a) A Remington Authorized Repair Center; or

B) Ship your firearm to the Remington factory at:

Remington Arms Company, Inc.

Ilion Firearms Plant

Attention: BL Safety Program

14 Hoefler Avenue

Ilion, NY 13357

Remington will bill or arrange for payment once your firearm is received and evaluated.

CAUTION: It is your responsibility to comply with all laws and regulations regarding transportation or shipping of your firearm. Absolutely no ammunition should be packaged with the firearm whether loaded in the firearm itself or included in the shipping container. The firearm should be transported only in a completely unloaded condition.

Link to comment
Share on other sites

If you go to Remington's Web site, you can find their video and written response to the so-called news story that got everyone talking about the 700. I'm not saying I know who is telling the truth, but it casts a very different light on the situation than was reported.

As one would expect, of course.

But it's worth taking the time to read/hear these.

Link to comment
Share on other sites

Man mine is a 1981 or 1982 model, will have to go to dad's farm and pull the file, so if it's a 1981 it should get looked at and if it was a 1982 I'm clear ? I saw the report 2x on CNBC, didn't like seeing people push the bolt forward and seeing the gun go off with no touch of the trigger or whatever I was seeing, got all remington guns, somewhat disturbing.

Link to comment
Share on other sites

If you go to Remington's Web site, you can find their video and written response to the so-called news story that got everyone talking about the 700. I'm not saying I know who is telling the truth, but it casts a very different light on the situation than was reported.

As one would expect, of course.

But it's worth taking the time to read/hear these.

Didn't the trigger designer himself more or less state that the trigger mechanism was faulty and requested that his bosses at Remington fix it.....DECADES ago. This isn't some Johnny come lately problem.

Link to comment
Share on other sites

Thats not what Remington states. Seems like in many cases like these, alot of hearsay comes and goes.

I wish one could just find all fact and forget all the other stuff that is not true. Also wish all parties involved would tell only fact.

Link to comment
Share on other sites

Didn't the trigger designer himself more or less state that the trigger mechanism was faulty and requested that his bosses at Remington fix it.....DECADES ago. This isn't some Johnny come lately problem.

You of all people should know better than to bleat before you inform yourself. You've poked at plenty of other posters who have done the same thing you just did. whistle

Link to comment
Share on other sites

The CNBC guy interviewed him and you all should watch the story then make your judgement about it, all I know is the guns they were showing firing weren't rugers or weatherby's or brownings or whatever, they were exactly what I have and it disgusts me that hard to believe I know but that the issue and complaints were seemingly swept under the rug, I know keep an open mind and there's likely more to the story I agree. It's tough when the guy who designed the trigger assembly says he knew of the problem so long ago, he's admitting his own failures then Remington says well they modified the gun and then some guy shows his gun swearing no modifications and turns the bolt and bang so it's a yucky one to figure out, lord knows these big time companies would never ever lie, that's a big part of our country telling lies, getting tougher to weed out the truth.

Link to comment
Share on other sites

I don't think Remington lawyers would want the company to admit to any of this. They would have a huge law suit. Unfortunatly it doesn't fix anything either. Of course Remington will deny having any problems with there 700 model gun. Its not just a problem with the person using the gun but everybody else as well. I could see a class action lawsuit here.

Link to comment
Share on other sites

What are you talking about? They interviewed the designer and they showed the sketches of the proposed "fix".

crazy

And I'm telling you that unless you read and watch Remington's responses, you won't really hear both sides of the story. I saw the CNBC piece, and as someone who was in the news reporting business for 15 years, I thought it was a shameful piece of so-called "journalism."

I'm NOT saying there's no problem with the 700, or that Remington is innocent. I AM saying the CNBC piece didn't do much of the job telling the story, and that anyone who wants to form an opion based on who said what should hear what they all have to say first.

Link to comment
Share on other sites

I've read the Remington response to "inform myself" as I heard about this issue around a month ago and it's typical legal CYA.

With that said, let the bleating continue. smirk

Link to comment
Share on other sites

I guess I'm not in a position to know which of Remington's statements are or are not true. As long as one has read/seen all one can before making a judgment, that's fine by me.

Not like anyone needs my approval or anything! gringrin

Baaaaaaaa!!! gringrin

Link to comment
Share on other sites

As I stated above, it would be nice if the parties involved would only tell the truth.

But as we know, when it comes to the courts and lawsuits, everyone is a bit on the maybe side. Noone tells the whole truth as they then might not prevail.

Link to comment
Share on other sites

FYI - The CNBC special is on tomorrow at 9am in case anyone is interested, bad journalism and all. wink

If I were to purchase a rifle the 700 is most likely the model I would choose. In the end it's up to the consumer to handle the firearm responsibly and control the muzzle direction but that doesn't excuse Remington or any other company from shoddy craftsmanship. Controlling the muzzle was one of the first rules of handling firearms I recall learning, and don't depend on the safety was another which was derived from the first.

Link to comment
Share on other sites

I have had NO issues with shoddy workmanship on any of the 700's I own.

The dude I talked to at Remoington said there are no issues with this gun unless you do not clean it well enough or if you rework the trigger for a lighter pull.

Link to comment
Share on other sites

The dude I talked to at Remoington said there are no issues with this gun

Did you expect him to respond any different?

Link to comment
Share on other sites

The dude I talked to at Remoington said there are no issues with this gun unless you do not clean it well enough or if you rework the trigger for a lighter pull.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • smurfy
      i cant help you with the weed thing, but i just came back form out that way......Regal, New London Hawick area. i dont no how big the swat of rain was but there is water standing everywhere. my buddy told me they had over 3 inches of rain yesterday/last night 
    • mulefarm
      With the early ice out, how is the curlyleaf pondweed doing?
    • LakeofthewoodsMN
      On the south end...   The big basin, otherwise known as Big Traverse Bay, is ice free.  Zippel Bay and Four Mile Bay are ice free as well.  Everything is shaping up nicely for the MN Fishing Opener on May 11th. With the walleye / sauger season currently closed, most anglers are targeting sturgeon and pike.  Some sturgeon anglers are fishing at the mouth of the Rainy River, but most sturgeon are targeted in Four Mile Bay or the Rainy River.  Hence, pike are the targeted species on the south shore and various bays currently.   Pike fishing this time of year is a unique opportunity, as LOW is border water with Canada, the pike season is open year round. The limit is 3 pike per day with one being able to be more than 40 inches. All fish 30 - 40 inches must be released. Back bays hold pike as they go through the various stages of the spawn.  Deadbait under a bobber, spinners, spoons and shallow diving crankbaits are all viable options.   Four Mile Bay, Bostic Bay and Zippel Bay are all small water and boats of various sizes work well. On the Rainy River...  Great news this week as we learned sturgeon will not be placed on the endangered species list by the U.S. Fish and Wildlife Service.     The organization had to make a decision by June 30 and listing sturgeon could have ended sturgeon fishing.  Thankfully, after looking at the many success stories across the nation, including LOW and the Rainy River, sturgeon fishing and successful sturgeon management continues.   A good week sturgeon fishing on the Rainy River.  Speaking to some sturgeon aficionados, fishing will actually get even better as water temps rise.     Four Mile Bay at the mouth of the Rainy River near the Wheeler's Point Boat Ramp is still producing good numbers of fish, as are various holes along the 42 miles of navigable Rainy River from the mouth to Birchdale.   The sturgeon season continues through May 15th and resumes again July 1st.   Oct 1 - April 23, Catch and Release April 24 - May 7, Harvest Season May 8 - May 15, Catch and Release May 16 - June 30, Sturgeon Fishing Closed July 1 - Sep 30, Harvest Season If you fish during the sturgeon harvest season and you want to keep a sturgeon, you must purchase a sturgeon tag for $5 prior to fishing.    One sturgeon per calendar year (45 - 50" inclusive, or over 75"). Most sturgeon anglers are either a glob of crawlers or a combo of crawlers and frozen emerald shiners on a sturgeon rig, which is an 18" leader with a 4/0 circle hook combined with a no roll sinker.  Local bait shops have all of the gear and bait. Up at the NW Angle...  A few spots with rotten ice, but as a rule, most of the Angle is showing off open water.  In these parts, most are looking ahead to the MN Fishing Opener.  Based on late ice fishing success, it should be a good one.  
    • leech~~
      Nice fish. I moved to the Sartell area last summer and just thought it was windy like this everyday up here? 🤭
    • Rick G
      Crazy windy again today.... This is has been the norm this spring. Between the wind and the cold fronts, fishing has been more challenging for me than most years.  Panfish have been moving in and out of the shallows quite a bit. One day they are up in the slop, the next they are out relating to cabbage or the newly sprouting lilly pads.  Today eye guy and I found them in 4-5 ft of water, hanging close to any tree branches that happened to be laying in the water.  Bigger fish were liking a 1/32 head and a Bobby Garland baby shad.   Highlight of the day way this healthy 15incher
    • monstermoose78
    • monstermoose78
      As I typed that here came a hen.  IMG_7032.mov   IMG_7032.mov
    • monstermoose78
      So far this morning nothing but non turkeys. 
    • monstermoose78
      Well yesterday I got a little excited and let a turkey get to close and I hit the blind!!
    • smurfy
      good......you?? living the dream..in my basement playing internet thug right now!!!!!! 🤣 working on getting the boat ready.......bought a new cheatmaster locator for the boat so working on that.   waiting for warmer weather to start my garden!!!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.