• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Join In - We Share Fishing Reports & Outdoor Information Here

     
      You know what we all love...

      The same things you do!!!! Share what you love & enjoy in the outdoors as well as thank those whose posts you 'appreciate.'

      Have Fun!!!

  • 0
Sign in to follow this  
thorski

Your Pinewood derby help....CONTRIBUTES TO SUCCESS!

Question

thorski

My son is in Cub Scouts and his first Pinewood derby is coming up late next month. Wondering if anyone has any pointers, suggestions, advice, etc? Thanks.

Share this post


Link to post
Share on other sites

Recommended Posts

  • 0
BoxMN

Sand the nails/axles with fine steel wool, and use silicon smile

Also, don't let a little brother hold the car before a heat! ha, my bro dropped my fast car and three wheels broke off. I was bummmed...

I also think keeping weight slightly more in front of car is better than in back, but not sure...

Most of all, make sure you son gets to work on car, not just Dad and buddy doing it all. He will have more fun the more he gets to do on it. With that said, you will have to do plenty too, so it gets done wink

Have fun! It will be a great time, making the car and racing it!

Share this post


Link to post
Share on other sites
  • 0
PierBridge

Good advice I'm still crushed a wobbly back right wheel cost me advancing to the next round!.

Share this post


Link to post
Share on other sites
  • 0
eyebjim

I agree the weight in the front is better.

Do a internet search of Pinewood derby and you will find a lot of help.

Share this post


Link to post
Share on other sites
  • 0
Jackpine Rob

Weight forward.

Box has the axle thing nailed.

Put the wheels in your electric drill (or better yet a lathe), and run them over emery sandpaper and emery cloth to smooth and get them trued and round. Those wheels may have some little bumps or imperfections.

Hope you and the boy have a riot with the project. Jr. and I sure had our fun back in the day, and his cars and trophies still grace the bookshelves in his room.

One year his car was shaped like a shark - another year it ended up being a black bear. Two others were more conventional, with one looking like a Formula 1 racer and another that looked like a 68 Camaro.

Edit: Oh yeah, and get as close to the maximum weight as you can without going over. A postal scale is very helpful. Lead is your friend.

Share this post


Link to post
Share on other sites
  • 0

My son is a veteran of 5 Pinewood Derby's. A word of caution, read the pack rules very carefully related to car construction/lubrication. Sometimes Pack car construction rules differ from District car construction rules. If your son wins at pack level and gets a berth to district, but gets disqualified due to a construction rule/lubrication difference, he will be crushed.

Having said that, as mentioned before, there are tons of ideas/tips on the web. My son was pretty motivated so we did a lot of research. (But he did the all the actual work he was capable of, I was hands off.) Far and away the biggest factor in making the car fast is reducing friction (assuming you make sure that you are near the weight limit.) Weight positioning is actually pretty low on the list. Axel prep is huge, but larger still is alignment. Make sure the car tracks straight on a flat surface. It will drag far less on the guide strip in the center of the lane that way. Also, usually there is no rule stating all 4 wheels must be in contact with the track. Keep the 4th one just above the other 3 wheels and off the track to eliminate it's friction all together. It only hits the track if the car bounces a little. If your rules allow, trim your wheels to reduce the surface area in contact with the track..... You should be starting to get the idea, there are tons of little tricks. Just find out what is legal in your pack.

If your son is really serious about doing well, the research and construction is almost as much fun as the races themselves. There is a guy out there that did a physics paper on what factors play into it the most. He goes into great detail about a lot of things, one being weight locations. Optimum weight placement depends on the track shape, but after he goes through all that, he points out that in testing it made very little difference in overall speed as compared to the benefit you can get by eliminating or reducing all the various sources of friction. If you can find that paper/website, you will have all the hints you need. Have fun!

By the way, according to that physics paper, most of the track designs out there are run faster with weight rearward, not forward. That physics paper I mentioned has all the details, all I remember is the general statement. Something about gravity, the amount of time gravity can work on the weight when it is higher off the floor, etc. Again, we are talking miniscule differences here. But a much bigger reason to have weight back is that every time the car's front wheels contact the guide strip it is easier for the front wheels to realign themselves on the track with less weight on them. Less weight on the front says more weight on the rear. Reduces friction essentially.

(As I said, my son was pretty serious about this, we learned a lot.) grin

Most important, make sure your son has fun and learns the skills you are teaching. That is arguably more important than the races.

Share this post


Link to post
Share on other sites
  • 0
Hafnutz

Whatever you do let him paint/finish the car to make it "his". Some of the strangest looking cars win but the kids think they're really cool. I can't wait til the grandsons' are old enough to start doing the cars again

Share this post


Link to post
Share on other sites
  • 0
Surface Tension

I know a little about Pinewood Derby Cars. grin

OK post those pictures.

Derby.jpg

A couple 1st places, and Best Overall. laugh We got two 2nd places cuz it was our rookie year. wink

The Cheez-it and Chartreuse Dragster were a big hit.

Yes Dads got to build a car too. cool

Most of the cars were foiled and some painted over bright.

All were clear coated to make the paint job pop.

You know you'd have to pay big money for this info don't ya. grin I'm only telling cuz I'm retired.

You'll need to take the casting off the wheel and make them round. Then narrow the contact surface. One front tire should be shorter or mounted higher to not make contact with the track at all.

The inside of the hub should be polished as well as the nail/axle. Check your rules, our troop does not allow and aftermarket axles, washers, or tires. Even then a parent would try and cheat but I still smoked them. Most of the weight should be on the rear tires. Don't make me explain the slingshot physics behind that, just do it or else you'll be in last place. Don't use the slots for the nails/axles, flip the car over and drill your holes and do that before you shape the car. When your all done shaping and painting, polish the side of the car where the axel inserts, then set your axles. You might have a dry lube rule in which case you'll use graphite, tip here, use a pencil. If they allow a wet lube use something very thin. Pledge furniture polish or kerosene. Just remember that wet lube will attract dirt and dust and you could end up in last place.

If you did a major mod and changed the distance between the wheels you better make sure its not going to scrape the nose in the transition. Get your weight up to the full 4 oz. I used 9mm bullets, drill a hole and press them in. Get a little tool box with some padding to put the car in to keep if from getting damaged. The top tray can hold your lube and special tools.

Share this post


Link to post
Share on other sites
  • 0
DTro

I never had the chance to do any of this when I was a kid, and I don’t have any kids, but don’t you think it’s great how a block of wood a couple of axles and 4 wheels can create such a passion?

I mean you have “old timers” (sorry Frank smile ) recollecting about their toy cars and even still being able to “smoke” the competition who tried to cheat. I love it, keep em coming guys!

Share this post


Link to post
Share on other sites
  • 0

Love the variety! My son did a Cheeze Whiz car, a car shaped like a wedge of swiss cheese, complete with a bunch of dremeled out holes, plus a tiny mouse driver sitting in one of the holes. Also had a Spongebob Car, and a couple of interesting looking dragster type bodies. He's got a shelf full of trophies too. It was a blast. If I can find a pic of the Cheese Whiz I'll post......

Share this post


Link to post
Share on other sites
  • 0
harvey lee

Yes, the Pinewood derby days. I won a pack championship and the metro championship in the cities.

We had a great time building and racing the car.

Share this post


Link to post
Share on other sites
  • 0
hawkeye43

Our troop has a class for the dads, so they don't put all their time in the kids car. Trim the wheels so they only run on the very center like a tire thats overinflated. have it so only 3 wheels touch the track and run as straight as you can

Share this post


Link to post
Share on other sites
  • 0
Boar

Ohboy Pinewood derby, I am a champion, my two brothers ore champions, my son is a champion, an my daughter is an open division champion, I am also a vintage division champion. One thing that has always helped us is to take the nails an insert them into a drill then put the drill into avise an lock it in the on position the take some fine emerycloth an sand of the rough edges especially the little tiny molding edge on the underside of the nail head, the take some 000 steel wool an tear off clump an twist it in your fingers so you have a small rope like piece of steel wool, with the drill still running finish smoothing off the axil. Now of course you have all used graphite, but what you need to look for is ultra fine graphite old hardware stores might still have some, I'm still using the tube my father used when I was in cub scouts. taking care of the tires is a very important factor, I finely sand down the tires to remove all molding blemishes. I also develope a very thin profile car. Good luck Boar

Share this post


Link to post
Share on other sites
  • 0
fishorgolf

Why didn't I have this info back when I did derby? I would have been the king. Oh I forgot there wasn't the internet back then. And I am only 49. Man have things changed quickly.

Share this post


Link to post
Share on other sites
  • 0
thorski

I don't know what happened, but there used to be more posts on this thread? It must have been deleted, including my thanking everyone, so here goes again.....

Thank you for all the responses. I had no clue that pinewood derby was so technical! Thanks for the tips and advise. My son and I are really getting excited. I will post how he did.

Thanks again.

Share this post


Link to post
Share on other sites
  • 0
harvey lee

Good luck.

Share this post


Link to post
Share on other sites
  • 0
Surface Tension

Good luck thorski.

Share this post


Link to post
Share on other sites
  • 0
thorski

My son and I would like to thank everyone for their help and advice! My son had his Cub Scout pack's Pinewood derby yesterday morning. What a blast. My son won every heat except one, where he came in second to the car that ended up being the overall winner of the day. My son's car took second overall. The top 5 cars go on to the district competition.

I will post pics as soon as I figure out how.

Thank you all!

Share this post


Link to post
Share on other sites
  • 0
B K'S DAD

They still have derby I haven't one in over 30 years.

Share this post


Link to post
Share on other sites
  • 0
harvey lee

Congrats to you and your son. I remember the fun those use to be.

Share this post


Link to post
Share on other sites
  • 0
redbandit

Thorski, I was in the same shoes 20 some yrs ago with my dad. I had the same 2nd place results in the pack as your son did. I still have that trophy stashed away in a box somewhere. You've brought back some fond memories that I'll never forget and I'm sure you and your son will have the same. Good luck to you at the distict competion and great job!

Share this post


Link to post
Share on other sites
  • 0
thorski

Here are a few pics I promised.

First, I made him a carrying case for his car out of a plastic tool box he had. I just cut some foam out and used some adhesive to attacht the foam to the tool box.

3292008245.jpg

3292008247.jpg

Here is the winning car with the trophy and medal.

3292008285.jpg

Thanks everyone!

Share this post


Link to post
Share on other sites
  • 0
PierBridge

Way Cool!

Good Luck in the next event!

Share this post


Link to post
Share on other sites
  • 0
Surface Tension

thorski, congrats to you and your son.

Good Luck at Districts.

Share this post


Link to post
Share on other sites
  • 0
tunrevir

Way to go! That is really cool, something your son won't soon forget. I still have my car and third place trophy from 30 years ago, lots of good memories.

Tunrevir~

Share this post


Link to post
Share on other sites
  • 0
DTro

So I heard from a co-worker today that they have offically banned lead from the cars.

Curious what people are going to be using now??

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • popriveter
      I’ll be winterizing my boat and prepping my ice gear this weekend. I’m usually excited for ice, but my fishing was terrible last winter and this is way too early a start. We should still be out on open water. Around Arden Hills, Shoreview I’ve noticed Valentine and Silver are 100% locked. Island still had a small patch of open water yesterday.  I’m not anxious to cut holes and check ice depth yet. It’s easier to make safe decisions this year when I’m so much less excited for ice fishing.
    • cookie129
      From 2 to 5 to 7?  What started as 2 fishermen Tylor and John last week. Wednesday Bill and Hays spent the night and walked out with not much luck. All though Bill is a photographer  and said he never wet a line as he snapped pic after pic of the sunset. I caught the tail end of it and should of snapped a picture myself, as it was spectacular to say the least.  Not even sure there's a name for the color,  maybe blood red? Thursday morning hays was not feeling very well so Bill went out on his own. Down at the lake working I saw 5 fishermen counting Bill. Yesterday it was up tp 7. I have had a dozen calls, how thick is the ice,  how's the fishing? Buddy Hillmen of Hillmens resort says around 5 inches, They are  allowing  walking traffic out to a mile where his road stakes stop.  I have heard of 5 fish caught and 1 lost at the hole so that's the fishing report.  Some one said it would be a zoo up here this weekend since the south end had that strong wind . I would have to disagree  as I have no one spending the night here until after thanksgiving? All the house are prepped down at the lake and ready to go other then a few little things. If anyone stays down there they will have to be cleaned again but that's fine with me.  Jonny boy did not get out as he was a little under the weather.  I did get a shot at a grouse with my recurve going out to my stand Thursday night. It was a shot through the brush and my arrow just missed. I 'll always give up being quiet when I have a chance at a grouse, either when I'm going, sitting or leaving my hunting area.  Years ago I took a grouse in the air with my recurve and flu flu arrow. I would love a repeat of that. Plus the hammer loves the way I make grouse as do I.  I was going to pull my deer stand but now have second thoughts . Some venison in the freezer would be nice. I like cutting up steak in super thin pieces then quick frying for a minute steak sandwich. Plus I'm still trying to harvest a deer with my recurve
    • monstermoose78
      There are people out ice fishing please use extreme caution!! Beaver runs can keep the ice thinner in a narrow area. Fish can cause thinner spots as well. I think I will check two early ice lakes today. 
    • monstermoose78
      I know a lake around my area that has ice anglers on it and it normally has the first Spearers as well, but I did not see a shack on the ice yet
    • iFishMN.YT
      I was out in the west metro, found a nice solid 3.75 in a shallow backwater type area I checked, but the main lake was too thin still.  Got one small sunny in 5 ft of water, it counts!  Thats the earliest in the season I have ever pulled a fish out a hole. Few more days for the locked up lakes I think,
    • knoppers
      bump give ice reports if you can. just don't go on any ice to give a report, be safe.   I know my 300 acre lake in aitkin froze  over last weekend, but ice depth could vary greatly this time of year.
    • Fishing Frenzy
      Anyone know of the lake is froze over? Or how much ice is on the lake if it is?
    • Schwarz04
      I’ll be out looking tomorrow... Have a spot in mind that I’m optimistic about. Which direction from downtown were you?
    • eyeguy 54
      Got the hangers today and really like them. I did have to drill a slot so they would work but easy peasy. The metal can be bent a bit to get the angle wanted. Moved the turkey fans to a different room and centered the 3 euros. I like the way it ended up.     New Age Taxidermy Head Honcho European Mounts on Amazon Smile
    • Rick
      The holidays are coming to the Governor’s Residence! Foresters from the Department of Natural Resources and the Conservation Corps of Minnesota harvested the official state Christmas tree Nov. 16 from the Nemadji State Forest. The tree, which is approximately 60 years old, will decorate the Governor’s Residence in St. Paul. “This year’s tree is absolutely gorgeous—tall, full, and almost perfectly shaped,” said Jean Mouelle, the DNR forester who selected this year’s tree. “It’s an impressive example of a balsam fir.” Each year, DNR staff chooses the Governor’s Christmas tree from one of Minnesota’s 59 state forests. Although the tree is always harvested on the Friday before Thanksgiving, the search for the perfect tree begins months beforehand. DNR foresters keep an eye out for a tall tree that’s nicely shaped and well filled out. The tree also needs to be in a location where it will not be damaged when dropped, and where foresters can easily remove it from the forest and load it onto a trailer. The tree will be set up at the Governor’s Residence, 1006 Summit Ave., St. Paul, at 9 a.m. on Monday, Nov. 19, and lit Monday, Nov. 26. Information about viewing the tree can be found at www.mn.gov/admin/governors-residence/tours/schedule. Half a million Christmas trees are harvested from private tree farms in Minnesota each holiday season, contributing about $30 million to the state’s economy. For each tree harvested, one to three trees are planted. Real Christmas trees provide an environmentally friendly decorating option during the holidays because they store carbon during their lifespan and can be chipped for mulch when the season is over. Discuss below - to view set the hook here.