Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

Recommended Posts

Posted

full-32630-41101-img_20140105_142613_457

My shack

Posted

Mj what did you use on your corners,as my house is in need of some but I don't know what to use.

Posted

Mj what did you use on your corners,as my house is in need of some but I don't know what to use.

Aluminum. I can't remember what size but I got them at the save big money store. They were barely wide enough to cover so I drilled holes close to the edge and angled the screws in. It turned out real good.

I used the strips that you buy with rubber roofing across the top edges.

Posted

Love the Shack MJ, where did you get the pike silhouette from? It just happens to be the same one that I had on my 6X8 wheel house... Very cool

Posted

Love the Shack MJ, where did you get the pike silhouette from? It just happens to be the same one that I had on my 6X8 wheel house... Very cool

I traced some decoys and pike wall art I have on construction paper. I cut them out with an X-acto knife and taped them on the wall and used spray paint. Tracing and cutting the spear out was quite a bit of work but it was fun.

Posted

full-32630-41128-img_20140105_222824_005

This is the pike I used for a pattern.

Posted

I will try and dig up the photos of my old house I know I posted some pics on here several years ago.

Posted

kinda slow in here....well I made it out today in -14 and brought an newbie

I had him clear the hole while I warmed up my finger tips and got the house out

0108140923a_zpsfbd1e90f.jpg

I couldn't get my screws in the ice so I used my log chains to hold the house out workd pretty well and I brought 2 augers with because its 50miles back home.

0108140953a_zpsf132f330.jpg

holes way bigger then I thought it was roughly 48"x36" and the black thing I found on road on my turn to the lake not sure what it is but it helpd keep my feet of the ice and made the house a lot more darker. oh and after all this work I was way less water then I thought we were in 6 foot of water and that's to the top of the ice so id say maybe 4' from below the ice.

0108140954a_zps8e12dcb6.jpg

dropd the decoy down and it wasn't even to the bottom of the string yet and the newbie naild it didn't even have to let the spear go lol. 24" and couple pounds.

0108141007_zpsd676a650.jpg

Posted

then I got a bunch of fish pictures and some videos but cant get them to load on to photobucket?

I bought a buddy 2 decoys for his birthday and haven't given them to him yet so I thought id try them before id give them to him. first one is a yellow and orange Lakco plastic which swam horrible ( I thought). but fish came in.

I also picked up a minnow harness to try it for the first time since I had some spare suckers.

0108141029a_zpsc6788414.jpg

then his last fish came in hot and he naild it the fish was 29" and thick and was around 8lbs picture makes it look like a baby. and he stuck his 3 in 45min and we seen 3 others besides his 3.

0108141044a_zps7c49f2cd.jpg

then we went threw the decoys to see what they liked today and we stuck fish on 3 different decoys. this one not sure who made it but it was heavy

0108141117e_zps58ff58ab.jpg

then this was a lakco wooden it was a little to light for me but swam ok

0108141144_zps073bfe65.jpg

If you look real close in that corner is a 10lber that just came threw and and I was screwing around with a fishing pole and didn't get a shot and he sat there watching and never came back

0108141248b_zps11a86bfd.jpg

only had 2 northerns that actually lookd at the sucker all the others naild the decoy.

0108141323_zps21083312.jpg

he got his 3 and I only got one since I was picky on fish today and just wanted to get some video and pictures

0108141420d_zps6a611338.jpg

these are the harnesse that I got that were huge on my suckers when I got home I pinched it shut so it was smaller and it was kinda plain do you guys put spinners or beads on yours.

0108141420d_zps6a611338.jpg

Posted

Sounds like it was a great day. Nice pictures.

Posted

these are the harnesse that I got that were huge on my suckers when I got home I pinched it shut so it was smaller and it was kinda plain do you guys put spinners or beads on yours.

0108141801_zps29a522b8.jpg

Posted

cool pics nice job

Posted

I dress them up...

image-69.jpg

Posted

great pics and looks like fun and the harness might be big on your suckers but that also might mean your suckers are to small wink don't be afraid to use a 12-14 inch sucker, but you would want to maybe add a little weight to him so they don't swim all over the place.

Posted

I dress them up...

image-69.jpg

that is sharp lookin now how big of suckers do you guys normally use mine was just a little guy maybe 3" long. and I got about 6 of them in the fish tank in the house.

Posted

Ask for a spearing decoy at the bait shop, I will use sucker as big as 15-16 inches but typically go about 12 -13 inches.

Posted

You will be surprised at how many little pike will come in and check out those big decoys and it also gets the pike to slow down and check out the bait so you have a little time to get your spear ready.

Posted

Ask for a spearing decoy at the bait shop, I will use sucker as big as 15-16 inches but typically go about 12 -13 inches.

WOW that's a big sucker.

Posted

Most people get the huge 10" suckers or so and their harnesses have weights on the top (for a pin on) and the live harness have the weights on the bottom. I personally use the live harnesses and have had only one get off because my fingers were numb when I put it on and didn't have it tight enough

Posted

I use suckers on the 10" range. I like your comments about how they were coming in on different decoys including some that didn't swim good. When they are in the mood it doesn't matter what you throw down there. Those are the fun days.

You can buy weighted pins like Neighbor Guys. They won't be quite as fancy as his. I like them because they keep the bigger suckers in the hole.

Posted

WOW that's a big sucker.
Posted

well I got a late Christmas present today....

0109141926a_zpseb89f78a.jpg

then I gota lead on a spear and made a run and well there was 3 and im hoping I got something good other wise I could have bought a new one.

0109141924_zps66b79288.jpg

0109141918_zpsb3dd5472.jpg

0109141916_zpsedc12ae1.jpg

then I ran outa money and couldn't by any decoys.. does anybody see any that are something that should go on the wall vs the water.

0109141654_zps7e1ffba4.jpg

0109141657_zps09b79017.jpg

0109141656_zps5a0c63d3.jpg

Posted

A few eaters from today! full-40781-41281-image.jpg

Posted

full-32630-41321-img_20140111_142833_184

Big girl that's still swimming.

Posted

Great pictures, keep them coming!

Posted

full-5451-41333-picsart_1389477619319.jp

A decent one from this morning.

Posted

First one of the year, 30". Saw around 8 today but they were on the small side, glad I held out for this one.

full-38641-41348-image.jpg

Posted

full-27329-41360-img_20140112_105348_195

39 3/4 16 pounds

Posted

Nice one Deerhunter!

Posted

full-32630-41361-img_20140112_125956.jpg

Joe stuck two of them when we were standing outside the house having lunch.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Your Responses - Share & Have Fun :)

    • smurfy
      on fish wrapper.....Jeff Sundin said he checked this ice out thingy.........its estimating bowstring ice out 4-27 to 5 -1............
    • Kettle
      Some smaller lakes around Rapids are opening up. Few should be completely free by next week. Last weekend some of the bigger lakes still had 2 ft of ice. Supposed to get warmer this weekend but Monday the high is 40 and lows below freezing. I'm going stir crazy myself 
    • smurfy
      hey Kettle and the rest of you northern Mn guys......... would you mind keeping your  doors and windows open..........👍😆 i'm getting tired of looking at them webcams up there and seeing ice on the lakes........i got stuff i need to do up at the cabin...........😉🙄
    • PSU
      Good Morning:   Trying to help a friend out as I mentioned to him the expertise on this site.   He bought a Garmin Echo Map last year for his 1800 Fisherman on Pokegama Lake. He claims he has power all the way up to the cradle, but when on the cradle, the system turns off. He's planning on driving the boat down to the cities from Pokegama for service on the Garmin, but thought I would ask some of you experts if there is anything he should try before doing so.    Again, I am sure it's a long shot, but anyone experience anything similar?
    • Mike89
    • Wanderer
      Glad you’re getting results!   I’d throw a new set of sparks in there for next season too.  Weak sparks have given people plenty of headaches.   I just had a deal where a friends wheeler just died while he was loading it on a trailer.  Wouldn’t restart for anything.  He and I did a lot of checks and trials to get it running but couldn’t.  I finally took it to my local small engine guy.  He repeated all the diagnostics we did, plus some, and couldn’t get it started.   Based on his experience, he decided to try a new set (mind you they did have spark outside the cylinder).  It fired right up.  Pretty rare for BOTH of them to go bad but it’s been running great ever since.
    • SkunkedAgain
      If you have a Mity-vac, make sure to pressure test the needle and seat before putting the carb back together. That will often solve leak/flooding issues (but I don't think that's your issue). It's a different type of fuel leak.
    • Wanderer
    • JerkinLips
      I moved the clips on the jet needles up to the top groove to lean it out.  This eliminated the mid-range bog and the sled accelerates well even when warm.  The plugs are not quite dark now, but look good.  I'll have to rebuild the Mikuni carbs this summer for the permanent solution.  I'll also repair or replace the primary clutch to eliminate that issue.  Thanks for all of the suggestions.  
    • monstermoose78
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.