Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

closed choke


HC Eye Hunter

Recommended Posts

Not quite sure I understand the question. The benelli tubes that come form the factory have the choke labeled on the side as well as notches in the end. With 1 notch being a full choke 3=Mod 4=Improved cylinder 5=cylinder.

If by closed you mean tight choke the full would be for lead shot only.

Link to comment
Share on other sites

A closed choke, I believe, makes the pattern of your shot (bbs) tighter than an open choke. So if you were hunting something where you wanted to deliver a lot of shot in a small area, that is when you would use the closed choke.

Link to comment
Share on other sites

So what your thinking is that it is a turkey choke or something like that. I have had the gun for 10 years and it came with five labeled chokes. I have never tried the closed choke and wasn't sure what to shoot through it without damaging the choke so I never gave it a second thought. I normally shoot steel so I mostly use the Mod. or improved chokes. I am assuming it is a lead only tube.

Thanks Much,

HC

Link to comment
Share on other sites

I really don't know. My aunt and uncle are big into skeet and trap so I have a basic knowlege. I do know know if lead would hurt the choke. Maybe you hsould try it, i mean if you never use ti anyway could it really hurt stuff that much??

Link to comment
Share on other sites

Just measure the internal diameter of the choke. A standard 12ga bore measures .729" however back bored guns are larger and Mossbergs are just wrong.

Rough indicators:

.729" cylynder

.720" Imp Cyl

.710" Mod

.694" Full

.684" X-Full

( http://www.colonialarms.com/chokespecs.html )

PJ

ps. Terror chokes kick butt and were designed for steel & Hevi-shot. My 10ga has a bore of .779" and I have Terror chokes of .720" & .705". According to the chart the .720" is XXXX-Full and the .705" is XXXXXXX-Full. At 40yds I'm getting 90% of BB steel in a 30" circle with the .720". Geese in SD will be suprised next weekend & over Thanksgiving grin.gif

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.