Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

Recommended Posts

Posted

Wondering if anyone has any reports from pelican no have a group of buddies coming up to ice fish the 9th of January. Wondering what ice conditions are can we drive trucks out of should we bring ATVS. Is anyone catching any fish. No need to give Gps locations just looking for some rough info.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • SkunkedAgain
      All of those Polaris sleds from that era were notorious for flooding and leaking. I've still got a 2003 XCSP 600 Edge that my daughter rides. As you noted, you need to shut off the fuel in those situations.
    • SkunkedAgain
      Yes, but it could make for an amazing walleye opener.
    • Wanderer
      How old is your belt?   My old Polaris 4 wheeler with belt drive was bogging at mid range to top end last year.  Changed the belt and that problem went away.
    • JerkinLips
      Previous owner (22 years and 5,000 miles ago) said it was prone to flooding when sitting for a long time or trailering, so I shut the fuel off in both cases.   Primary is significantly worn.  I replaced several rollers and pins which helped.  I have two used clutches in much better condition that I could (and should) install.   It seems more like when I hit the throttle, but the bog could be from poor clutch shifting.  Will have to pay attention next time and inspect the clutches.  Thanks for the ideas.
    • jparrucci
      Nope, he beat me fair and square, all his.  This weather had been depressing. As it sits now we are looking at a later than normal ice out. I hate scrabbling with docks, lifts, boats right before opener. Also limits some pre opener crappie chances. 
    • smurfy
      👍 when/if i get drawn.....which i should know about june 1 we'll get in touch........both my kid and myself should get drawn.   and thanks.........with 6 preference points............i think are odds are pretty good.............there giving out 375 permits......and since we had yogi and booboo destroy my birdfeeders last spring......🙄 
    • fishingstar
      In those years Polaris was known to put buna tipped needles in there sleds. They get a ring around the seat and don't seal shut. But if that would be the case your problem would be with the motor shut off and filling the crankcase with gas. If your plugs are brown that is were they should be. I wouldn't drop that needle down to the last grove. I would replace them before I did that. I have never had a carb with that setting. Have you looked at your clutches? They could be dirty or have a bad roller.  Does it bog as it's accelerating or when you hit the throttle?     
    • Mike89
      but if he really wants I can change the date..  
    • Wanderer
      As soon as I started reading mind went to needles and seats.  You might want to try just replacing those first?  I’ve only done that once before in my life but it made the difference.  A carb refresh in 8,000 miles seems reasonable.
    • Wanderer
      Good luck smurfy!  On getting drawn, I mean!   If it comes down to it, I know a guy that might be interested in a nice hide.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.