Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

Recommended Posts

Posted

Hi everyone. Last weekend me and a friend tried to get to the winter access at bayport the usual way so we could fish shanty town, but at the railroad tracks the road was blocked off. How are people getting on the ice right now? Thank you

Posted

Lakeside Park on the MN side. Not sure about WI side. Shouldn't be too long before the winter access opens... Hopefully.

Posted

Thanks flaco651. I'll try to hit it this weekend and see how the crappie are biting.

Posted

There is a thread for this topic but, the only access in on the WI side which is Ferry Landing. I am told the Bayport access opens when the ice is thick enough to drive on. The WI access is tricky right now because of the warm days we had. The shore is melted in most spots at the landing and you can't even get on with a vehicle. If you go 75ft. south it gets better and you can drive your car on the ice safely.....instead of 2 feet of open water till' you get to the good ice. Good luck....

  • 2 weeks later...
Posted

The lack of public access from Stillwater south is deplorable. With the shear volume of water and shoreline, there should be an access at least every couple of miles! Really irritating.

Posted

^ Talk with the DNR, Mayors & City Councilmembers.

Let us know their responses. smile

Posted

Is there a parking fee at Lakeside Park? There was an honor box and mention of a $10 fee. Does that apply in the winter?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • SkunkedAgain
      All of those Polaris sleds from that era were notorious for flooding and leaking. I've still got a 2003 XCSP 600 Edge that my daughter rides. As you noted, you need to shut off the fuel in those situations.
    • SkunkedAgain
      Yes, but it could make for an amazing walleye opener.
    • Wanderer
      How old is your belt?   My old Polaris 4 wheeler with belt drive was bogging at mid range to top end last year.  Changed the belt and that problem went away.
    • JerkinLips
      Previous owner (22 years and 5,000 miles ago) said it was prone to flooding when sitting for a long time or trailering, so I shut the fuel off in both cases.   Primary is significantly worn.  I replaced several rollers and pins which helped.  I have two used clutches in much better condition that I could (and should) install.   It seems more like when I hit the throttle, but the bog could be from poor clutch shifting.  Will have to pay attention next time and inspect the clutches.  Thanks for the ideas.
    • jparrucci
      Nope, he beat me fair and square, all his.  This weather had been depressing. As it sits now we are looking at a later than normal ice out. I hate scrabbling with docks, lifts, boats right before opener. Also limits some pre opener crappie chances. 
    • smurfy
      👍 when/if i get drawn.....which i should know about june 1 we'll get in touch........both my kid and myself should get drawn.   and thanks.........with 6 preference points............i think are odds are pretty good.............there giving out 375 permits......and since we had yogi and booboo destroy my birdfeeders last spring......🙄 
    • fishingstar
      In those years Polaris was known to put buna tipped needles in there sleds. They get a ring around the seat and don't seal shut. But if that would be the case your problem would be with the motor shut off and filling the crankcase with gas. If your plugs are brown that is were they should be. I wouldn't drop that needle down to the last grove. I would replace them before I did that. I have never had a carb with that setting. Have you looked at your clutches? They could be dirty or have a bad roller.  Does it bog as it's accelerating or when you hit the throttle?     
    • Mike89
      but if he really wants I can change the date..  
    • Wanderer
      As soon as I started reading mind went to needles and seats.  You might want to try just replacing those first?  I’ve only done that once before in my life but it made the difference.  A carb refresh in 8,000 miles seems reasonable.
    • Wanderer
      Good luck smurfy!  On getting drawn, I mean!   If it comes down to it, I know a guy that might be interested in a nice hide.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.