Long story short. Was getting my boat all ready for opener yesterday and knocked my knee against my transducer. Looked down and it busted off right where it connects to the plastic piece that the bolt runs through...
I crazy glued it back together, but have concerns:
1. Will the crazy glue be strong enough once I get the boat running through water or will it just bust off right away?
2. Will the crazy glue affect the transducers reading? (shouldn't even really be on the transducer only where it connects to that other plastic piece)
Or do any of you have any other better suggestions or what it costs to replace it? It's a cheaper locator believe its an Eagle, so if I had to replace the transducer for a steep cost prob would splurge and by a whole new locator. Thanks in advance.
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Rivergroup, Are you on the east or west side of the lake. When you say before 7am what time you going out? 5am? How deep of water? Just looking for starting point for this coming weekend. Thanks!
As I understand the challenge, there are regulations regarding water pumping and circulation from the lake into holding tanks for minnows. It makes keeping minnows alive and healthy, as a sustainable business, very difficult for lakeshore businesses.
We ran out of minnows and couldn't find any at the bait shops. So we fished with leeches last night and had great success. Just about all of them we caught were 14 - 17 inches. Shallower bays have warmed up and they are in their feeding at dusk.
Shamrock did have rainbows and chubs but their tank broke down. They’re out of the minnow business. River group is right, though. A leech caught a 22” er this morning.
RLG
Question
BuckmasterG
Long story short. Was getting my boat all ready for opener yesterday and knocked my knee against my transducer. Looked down and it busted off right where it connects to the plastic piece that the bolt runs through...
I crazy glued it back together, but have concerns:
1. Will the crazy glue be strong enough once I get the boat running through water or will it just bust off right away?
2. Will the crazy glue affect the transducers reading? (shouldn't even really be on the transducer only where it connects to that other plastic piece)
Or do any of you have any other better suggestions or what it costs to replace it? It's a cheaper locator believe its an Eagle, so if I had to replace the transducer for a steep cost prob would splurge and by a whole new locator. Thanks in advance.
Link to comment
Share on other sites
17 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.