Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • 0

Cordless Hedge Trimmer


Question

Posted

I have been doing some scouting for archery deer season and have found a place where a long, narrow strip of cattails (about 30 - 40 yards wide) separates a corn field and a soybean field. The deer are bedding in the corn field durring the day, and crossing the cattails in the evening to feed in the soybean field. There is a tree right at the edge of the cattails on the soybean side, and I will be hanging a stand there for the upcoming archery season. The problem is, the deer are crossing the cattails in multiple different places.

I have permission from the landowner to cut a path through the cattails to funnel deer traffic closer to the tree where my stand will be. I'm thinking that the best way to do this may be with a cordless hedge trimmer, although I have never used one before. Does anybody have any experience with cordless hedge trimmers? Will a cordless hedge trimmer work for this application, or would there be a better method? The cattails are very thick, so I am concerned about battery strength. I would like to make this path about 10 feet wide.

Any advice or experiences would be greatly appreciated.

Thank you,

3 answers to this question

Recommended Posts

  • 0
Posted

I doubt that a hedge trimmer would work. They are designed to snap off twigs. A gas weed whip with a brush cutter blade might do the trick

  • 0
Posted

I was under the impression that cutting cattails is illegal without DNR permission. Might be worth your time to check with them first.

  • 0
Posted

  Ralph Wiggum said:
I was under the impression that cutting cattails is illegal without DNR permission. Might be worth your time to check with them first.

On the farm in central MN, we were thinking the same thing. We contacted the dnr, and they said as long as we don't tile the ground, and are just cutting them, and not getting rid of them, it was OK. Not sure what the Dakota's law is on that.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • jparrucci
      Nope, he beat me fair and square, all his.  This weather had been depressing. As it sits now we are looking at a later than normal ice out. I hate scrabbling with docks, lifts, boats right before opener. Also limits some pre opener crappie chances. 
    • smurfy
      👍 when/if i get drawn.....which i should know about june 1 we'll get in touch........both my kid and myself should get drawn.   and thanks.........with 6 preference points............i think are odds are pretty good.............there giving out 375 permits......and since we had yogi and booboo destroy my birdfeeders last spring......🙄 
    • fishingstar
      In those years Polaris was known to put buna tipped needles in there sleds. They get a ring around the seat and don't seal shut. But if that would be the case your problem would be with the motor shut off and filling the crankcase with gas. If your plugs are brown that is were they should be. I wouldn't drop that needle down to the last grove. I would replace them before I did that. I have never had a carb with that setting. Have you looked at your clutches? They could be dirty or have a bad roller.  Does it bog as it's accelerating or when you hit the throttle?     
    • Mike89
      but if he really wants I can change the date..  
    • Wanderer
      As soon as I started reading mind went to needles and seats.  You might want to try just replacing those first?  I’ve only done that once before in my life but it made the difference.  A carb refresh in 8,000 miles seems reasonable.
    • Wanderer
      Good luck smurfy!  On getting drawn, I mean!   If it comes down to it, I know a guy that might be interested in a nice hide.
    • JerkinLips
      My 30 year-old Indy 500 (over 8,000 miles) has been having a mid-range bog for many years now.  It is worse on warm days and when the engine is warmer.  The sled runs fine up to about 1/4 throttle, then runs extremely rich up to 3/4 throttle.  The spark plugs are dark brown (better brown than down?) but not saturated.  8 years ago I moved the clips on the jet needles from the 3rd to the 2nd groove to lean the mixture and it helped for a while.   Should I move the clips to the top groove (temporary solution)? Could the jet needles, needle jets, and/or the main jets be warn and need replacement?   Don't think I will have time to tear the carbs apart this season for a rebuild so I may just band-aid the problem.
    • JerkinLips
      I think that Mike89 picked April 26 two hours before you, jparrucci.  Is that correct Mike89?
    • leech~~
      My last hide I gave to my Taxidermist friend to make what ever he liked out of it.   I've got a few fun Bear hunt stories to be told.  All 3 of us our first year stupidly tracking a blood trail in the dark together and getting lost, luckily smelled the bait making circles and got out. 🫣 Flash lights dying, deep in a swamp following a blood trail in the dark, the one who stayed at the bait called us back in!  We learned our second bear! Lol. 😞  Downing a wounded charging bear with the last bullet when tracking, no lie! 😬    Have had my fun!  🥳
    • Wanderer
      I remember that kegel… stuff….!   just finished my post work latte as a matter of fact!  Only the second case of those I’ve ever bought.     I’d get Mike something better.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.