Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

2020 Mille Lacs Lake Fishing Reports


Rick

Recommended Posts

Have you ever tried hammered copper blade, and then chart/blue beads??? Works well

Link to comment
Share on other sites

I'll have to give that a try. I normally use a hammered gold blade then 1 red bead and 3 chartrues beads.

Link to comment
Share on other sites

I was up fishing Mille Lacs for the first time in my life and went into Terry's and enough said he gave me the spinner and he gave me and bait and told me to go out to the mud and go around 1 to 1.3 MPH and you catch the Blank out of them. So I took my silver rig he gave me and my rainbow minnows and went out not expecting to catch much. But I was proved wrong and fished all day with two people we mush have had close to 30 fish plus we caught our slots. So I would recommend going there he knows whats going on. Tell him the guy in the Red Suburban sent you and he will give you the Right rig! Good luck have fun.

Link to comment
Share on other sites

How's fishers rock pile doing in the evening? Or other rock piles. Heading up on Friday.

Link to comment
Share on other sites

When using spinners do you need to feed them line when you feel them hit, or do they usually hook up on the strike like when trolling cranks?

Also, how many beads should I be putting on to start with? I am sure like any other way you need to let the fish tell you what they want. I am just looking to see what has been working lately for starters.

Thanks.

Mike J

Link to comment
Share on other sites

Mike,

When using spinnners, usually feel the strike and give them the rod tip, then set the hook. If you are missing them, then it's time to feed a little line.

The amount of beads depends on the blade size. You want the bottom of the blade to just touch the eye of the hook.

Hope this helps.

Link to comment
Share on other sites

I was up fishing Mille Lacs for the first time in my life and went into Terry's.........

Are you referring to Terry's up at Garrison?

Link to comment
Share on other sites

rodmaker is dead on if fishing with a slip sinker/slip bottom bouncer. If fishing a bottom bouncer with snell tied direct just give them a little rod tip(keep a little tension on the line) as rodmaker suggested. A little trick I use when fishing with inexperienced fishermen is to put the rod in a rod holder and dont take it out until the rod has a good bend in it. When holding on to the rod I have found that novices want to set the hook as soon as they feel the strike. I fished the red door tourney this past weekend and had my rod in the rod holder most of the time and didn't miss any more fish than my experienced fishing partner holding the rod.

Link to comment
Share on other sites

Good suggestion. I've done this some when trolling spinners, but not drifting with them.

When drifting spinners, I usually give them a little line, then set the hook. It always works for me.

Link to comment
Share on other sites

I'm going to try and make it up saturday and then possibly take a day off next week and head back up. Have to wait and see what this weather does.

I have a feeling we are going to be seeing more boat traffic up there with all of the good reports floating around.

Link to comment
Share on other sites

I'm going up this Fri. I'll post results when I get back. Hard to tell about the boat traffic.;

Link to comment
Share on other sites

Was out Sunday. Fished the deep gravel between 4&5 mile reefs in about 30 FOW. Even though it was dead calm, we caught about a dozen fish all under 18". Some were 9"-10" which is promising for next year! Both crawlers and leeches worked, going fast did not work. We ran down to Sloppy Joes and anchored up to fish with corks (can't go much slower than that!). We caught 2 25" fish and then left for the day when the wind came up and got the lake rolling.

Heard minnows were working, had none so I can't confirm that but they're worth a try.

Good luck!

Link to comment
Share on other sites

Maybe someone already posted this, but what speed generally works the best when using spinners? Just slow enough to keep them spinning, or do you usually speed it up a little? Thanks.

Link to comment
Share on other sites

I was slowly drifting with the wind this morning off indian point pulling a spinner combo at 1.4 and hooked up with 3 over and 2 eaters with a single hook and a crawler

Link to comment
Share on other sites

Sorry this post is late. I did get up there Fri. Windy and a little rain. Winds around 20 NW.

We put in at Terry's boat harbor and fished the flats out there. We caught 11 Eyes . 5 slots, 3 over the slot, and the rest small guys. We also caught 3 big jumbos around 12".

Caught the fish on top of the flats, We caught most of the fish on crawlers on a hammered copper blade size 3, with blue/chart beads 8 ft snell.

We did catch some on leeches, plain red hook. My biggest was 20 1/2" on leech/spinner.

It was nice to fish with Cousin Bob and my two Brothers.

Link to comment
Share on other sites

Fished this morning...descent wind, picked up 2-25", 22", 19"...then the wind died down. Fished the flats, leech, plain hook and small bead...nice day to be on the pond!

Link to comment
Share on other sites

ya blue is the color there,white works for me,kinda funny how the color makes such a big difference...

Link to comment
Share on other sites

Fished tues, wed, thurs, sat and sunday this week. There is a Real good spinner bite going and also a could crank bait bite going. The cloudy windy days seem to be the best. Sunday was a little slower for most of the guides I talked to including my boat, but we still got fish. It was flat calm and sunny most of the day Sunday I am sure attributing to a little slow down. It is a horse a piece between cranks and spinners right now. Some days the guys pulling the cranks are out doing the guys spinner rigging and the next day it will be the other way around. If you have never run leadcore and cranks, right now is the time to experiment with it and learn a new technique that can really put fish in the boat. The tops of the flats seem to be holding the fish and they are scattered a bit so covering ground is the best way to hook em up. Speed seems to be really key and it is day to day what they want. Spinners at .8-1.1 will trigger a bite one day then the next day 1.4 will trigger a bite. Cranks 2.0 -2.3 seems to be the best.

Link to comment
Share on other sites

Crazy as it may sound but on Sat I was able to put more walleyes in the boat trolling leadcore & cranks at 2.8-3.0 rather than the usual 2.0-2.4 mph. Go figure usually around 2.0 is best even later in the season.

Link to comment
Share on other sites

Doesn't sound crazy to me at all. You got mix it up until you figure out what will trigger bites, I have had days like that as well.

Link to comment
Share on other sites

Rodmaker if you don't mind my asking were you pulling those spinners behind 3ways or bouncers? It seems like I don't have any luck with bouncers on the mud, maybe we're dragging them or something.

Link to comment
Share on other sites

When we were there last Fri. I was pulling Spinners with a 1/2 egg sinker and a 8 ft snell. (Lindy rig style). I would feel the bite, and give them the rod tip, or feed them a little line, then set the hook.

When fishing the mud: Let out line , feel the bottom, and wind up and keep in contact with the bottom. We were drifting and using two wind socks.

I don't use 3 ways. I use bottom bouncers also. You will get people weighing in on this but you can still catch Eyes dragging the mud, but use a little lighter sinker. I think the key here is just let out enough line to feel the bottom, then maybe a few feet more. I still catch alot this way, but I think you are better off feeling the bottom then winding up around a foot ot so. Last Fri , I caught more Eyes dragging. Winds were 20. I was using a 1/2 oz egg sinker. Let out line felt the bottom, then another 5 ft or so. They still hammered the spinners this way. I caught more Eyes than the other two guys in the boat who were keeping their sinker just off the bottom.

If you are trolling with your main motor, then definatly keep your sinkers off the mud. But drifting slow, or using the trolling motor, you can get away with dragging a little.

Hope this helps. Looking to get back this Fri, or Sat.

Link to comment
Share on other sites

are you running tail dancers???

#5 jointed shad raps & #7 minnow raps were working the best

Link to comment
Share on other sites

  • The title was changed to 2020 Mille Lacs Lake Fishing Reports

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Similar Content

  • Your Responses - Share & Have Fun :)

    • Kettle
      Walked today and yesterday, flushed 9, shot at two and got two. Hopefully next year I'll have a dog to hunt with. Still warm up here, skim of ice on ponds. Weather has been nice. Hopefully walk a bit more the next few weeks. Been pretty cautious walking for birds to not interfere with deer hunters. There sure are not the deer hunters there used to be 
    • LakeofthewoodsMN
      On the South Shore...  The focus for many this week is the ongoing deer hunting season which is a big tradition in these parts, even for avid walleye anglers.  There were some that either already harvested their deer or are more into catching fall walleyes than hunting.     Those that are fishing are taking advantage of the unseasonably warm weather and excellent walleye and sauger bite that is happening across the lake.  Cold weather is in the forecast in the upcoming days and weeks so that is also getting many excited. The best depths on the south end of LOW are 22-28 feet of water.     Vertical jigging with frozen emerald shiners is catching most of the walleyes, saugers and jumbo perch.  Depending upon where on the lake you are fishing, some slots and big trophies are in the mix as well, but most reports are talking about good numbers of eaters.    Jumbo perch are coming in good numbers this fall which will serve ice anglers well.  Watch out for an occasional pike or even lake sturgeon mixed in with the walleyes.      There are good numbers of walleyes and saugers across the south shore which is setting up nicely for early ice.   On the Rainy River...  There continues to be good numbers of shiners in the river, and consequently, there are good walleyes in the river as well.     Walleyes along with saugers, pike and some sturgeon are coming in up and down the river.  Most walleyes are being caught in 10-25 feet of water in various stretches of the river.   Jigging with live or frozen emerald shiners is the key. Some anglers are also still slow trolling crankbaits upstream to cover more ground and find fish. Both methods are producing solid results. Sturgeon fishing remains strong.  The catch-and-release sturgeon fishing is open into the spring when it changes to the "keep season" on April 24th. Up at the NW Angle...  As temps are getting colder, most are in the woods hunting and not fall fishing, however, for those who bundle up, fishing continues to be excellent.     A nice mixed bag with walleyes, saugers, perch, pike and crappies being caught. Very good muskie fishing with the colder water temps and shorter days.  Some big fish and some good numbers are being caught amongst the islands.  Both casting and trolling is getting it done.  
    • gimruis
      I hunt in the rifle zone so I don't have a need to use a shotgun to hunt deer, but I would be looking at this if there was ever a need to.   There could be state legislation introduced next summer that eliminates the shotgun zone completely.  It has bipartisan support.  Wisconsin removed theirs years ago and MN is usually later to follow.  They've tried to pass it more than once and it came up just short both times.  Probably just a matter of time.
    • Wanderer
      Oh, h e l l no! 
    • leech~~
      Screw that, here's whatch need!  😆   Power-Shok Rifled Slug 10 Gauge 766 Grain Grain Weight: 766 Shotshell Length: 3-1/2in / 89mm Muzzle Velocity: 1280
    • Wanderer
      20 ga has become a real popular deer round in the last 5 or so years.  The rifled barrels are zinging those sabot slugs with rifle like accuracy out to 100 yards easily.  Some go so far as dialing in for a 200 yard shot but really, by 150 they’re falling off pretty low.   I have a single shot Ultraslug in 20 ga that shoots really well at 100 yards.  Most everyone I know that has bought a slug gun lately has gotten the Savage 220 in 20ga.  Problem can be finding the shells you want.
    • leech~~
      My son always bugs me about getting a nice light over-under 20ga for grouse hunting.  I say Heck no, I'm getting a 3 1/2" 10ga so I can put as much lead in the air that I can!!     So, I'm keeping my 12ga.  
    • 11-87
      That’s almost exactly what I was thinking.  Have slug barrels for both   One for turkey and one for deer.      I have a 20ga mosseberg as well. (Combo came with the scope but never used.   I always liked the 12 better
    • leech~~
      Wanderer is right on the money and covered it well.  I was wondering too if you had a slug barrel for one of your guns?  If so you could make that your slug gun with a scope, and the other your turkey gun with the Red dot.  As you can afford it. 
    • Wanderer
      Kinda depends on if you want magnification or quick target acquisition.   More magnification options and better accuracy with a scope.  You get what you pay for too so get comfortable with a budget for one.  Tasco and Bushnell work but I find they lose their zero easier, have low contrast and don’t gather light well in low light conditions.  That said, I’m still using one I haven’t replaced yet.  Vortex has been the hot brand for the past several years for bang for the buck.  Good products.  Nothing beats Swarovski though.  Huge dough for those.  Burris is another decent option.   There are some specific models for shotgun/slug hunting in the economy brands and bullet drop compensation (BDC) reticles.  Based on experience I’d recommend not falling for that marketing ploy.   Red dots are usually lower magnification and easier to get on target.  Reasonably accurate but don’t do well with definition, like searching the brush for your target.  I put a HAWKE red dot on a .22 for squirrels and it’s been good.  For turkey, that’s probably the route I’d go.     If your slug shots are normally not too far and too brushy, I’d think a red dot could work there too if you’re only buying 1 scope.  You’ll be better off dimming the reticle to the lowest setting you can easily use to not over shine the target and get a finer aim point.   If you don’t have a slug barrel, you might appreciate one of those.  I had a browning with a smoothbore slug barrel that shot Brenneke 2-3/4 inch well.  The 11-87 would well fitted with a cantelever rifled barrel. 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.