Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

30-06


The_King48

Recommended Posts

Get a .270 and shoot 130 gr. out of it and you will be very pleased every time you see it drop the animal. Which is most all of the time for me... Stainless what??? Not needed IMHO.

Win. model 70 Bolt action .270

Leupold 3x9 Vari X 3

Federal 130 gr. Fusion bullets

Great results every time.

What more can you ask in a deer rifle out to 300 yds??? Maybe even further if I were to need to shoot that far?

Link to comment
Share on other sites

Get a .270 and shoot 130 gr. out of it and you will be very pleased every time you see it drop the animal. Which is most all of the time for me... Stainless what??? Not needed IMHO.

Win. model 70 Bolt action .270

Leupold 3x9 Vari X 3

Federal 130 gr. Fusion bullets

Great results every time.

What more can you ask in a deer rifle out to 300 yds??? Maybe even further if I were to need to shoot that far?

I second that Jiggn' I have a Howa .270 and is a tack driver with

the Federal 130 gr. Fusions.

Link to comment
Share on other sites

The original poster was asking about an automatic 30-06 in stainless, and somebody asked about 220 grain bullets. None of this makes sense. Stainless and synthetic are tough, and don't need the kind of carefull care that fine wood and blued steel do -- fine -- but automatics need that kind of care anyway. A 30-06 reciever is long, and putting it in an automatic only makes it longer, causing a shorter barrel if you need to swing the thing, and thereby reducing accuracy. It's far better suited in a bolt, especially in a beefy model like your 700.

That's a good explanation for the reasoning behind your previous post. Thanks for the follow up and please disregard my previous smart aleck remark.

Link to comment
Share on other sites

Go for the new BAR or Benelli and stay away from the Boss system. I have the Boss on my A-Bolt and have put the unported solid one on because of the noise factor.

Link to comment
Share on other sites

Originally Posted By: looneyducer
The original poster was asking about an automatic 30-06 in stainless, and somebody asked about 220 grain bullets. None of this makes sense. Stainless and synthetic are tough, and don't need the kind of carefull care that fine wood and blued steel do -- fine -- but automatics need that kind of care anyway. A 30-06 reciever is long, and putting it in an automatic only makes it longer, causing a shorter barrel if you need to swing the thing, and thereby reducing accuracy. It's far better suited in a bolt, especially in a beefy model like your 700.

That's a good explanation for the reasoning behind your previous post. Thanks for the follow up and please disregard my previous smart aleck remark.

I should have been more clear from the get-go. My bad.

It really does make the most sense as a set-up, not that even that is going to make me stray away from my .270 anytime soon. Those other two guys make a good point about their 270s and 130 grain bullets. Again, 3,000 feet per second, ballpark. Almost all the killingest loads run right in there: 100 grain in a .243, 130 in a .270, 150 in a .30-06, 180 in a .300 Winchester... Those are the standard loads for four out of the five most popular calibers in North America. I don't think that is coincidence. You watch: the 7mm08 is going to join them. It's ballistically smack dab between the 270 and the 06, but with the cartridge length of a .243. How could you go wrong?

Personally, I want one in a Remington Model 7 just for starting all my neices and nephews out on.

Link to comment
Share on other sites

Personally, I want one in a Remington Model 7 just for starting all my neices and nephews out on.

I'll have to check them out when it comes time to buy son a high-power rifle.

Link to comment
Share on other sites

I've been rolling around the idea of purchasing a rifle for whitetail but not quite sure what cal to go with. I'd be hunting in ND so longer distance shots are a very real possibility, and most likely the norm rather than the exception. My dad has been shooting a 25-06 for years and it knocks them down quite nicely, yet you hardly hear any discussion about that round. I'm thinking 25-06, 270, or 7mm-08 is where I'll end up. Not sure which of the three will be the winner in the end.

Link to comment
Share on other sites

here's where we could debate til we're blue in the face about calibers. The 25.06 has been around since 1920 in custom made guns and brought onto the market around 1969 by Remington. .06 brass can be full lenght resized in the 25.06 dies as well as .270 brass with some lenght trimming. It does give a shooter some good varmit rounds and up to 120 grain for deer, antelope but, alittle limited on ranges over 250 because of downrange energy loss. Muzzle velocities of 2700- 3000 can be reached with judicious loading practices. It is a pretty popular caliber out here in SoDak. I'm goin to say that overall, the 25-.06 is somewhat snubbed because the big boys in the magazine publishing business and TV sponsors push the BIGGER belted and short Mags. It's called commmercialism. After the market is saturated with common calibers they have to come out with something to move new and "improved" products. I shoot .270, .06 & .243 depending on where I am goin to be. After that being said, the 25-.06 is an excellent choice within it's limitations. I'll say this again, a 20.00 investment in a reloading manual will give a person all he needs to know about particular calibers, the history and ballistics.

Link to comment
Share on other sites

Thanks for the reply. I never thought about a reloading manual for ballistic information. I'll have to do some snooping around for one.

A few years ago I was hunting with my dad and we spotted a buck almost 400 yds out. He was looking at it through his scope and I through the binoculars. I told him not to shoot because it was too far. I think I unintentionally issued a challenge because a few seconds later I heard the single-shot 25-06 bark and a split second later the hide on the buck ruffled and down he went after a short hop to his right. I wouldn't have believed it unless I saw it with my own eyes. Factory ammo too. I still remember the delay in what seemed seconds from when the gun fired until the buck was hit. Dad was sure proud of that shot, and he should be!

Link to comment
Share on other sites

I decided to go with a .270 WSM. I got that cal. in a Browning Stainless Stalker. I can't wait to shoot this rifle. I topped it with a Zeiss scope. I will post a pic when the wife opens her x-mas gift. I new digital camera.

Link to comment
Share on other sites

hi, new poster here!! '

just wondering if you knew where i could get help/ info on tearing down my 742 auto. its older and is past due i am sure. also the forearm is cracked and i need a replacement (used?) THANKS IN ADVANCE FOR ANY INFO!

Link to comment
Share on other sites

Welcome to Fishing Minnesota 87racer!

Sorry, I can't help you with your question but I'm guessing someone else will chime in with some suggestions.

Just wanted to say welcome2.gif

Link to comment
Share on other sites

If you drop the magazine and push out both pins holding the trigger assembly in, you can do an effective enough job cleaning out the bolt mechanism with some gun scrubber and Q-tips. You'll also want to use gunscrubber on the tube and spring assembly inside the forearm, but you do want to make sure you put plenty of oil back on there, as both the rod and the spring have a tendency to rust.

Link to comment
Share on other sites

thank you both. this seems to be a great forum!! are the pins suppose to be tapped out with a punch?? also are there any special tools needed to fully disassemble to get to the gas ports?? thanks again!

Link to comment
Share on other sites

The last one I had here we pushed the pins out with the backside of the actual pen cartridge from a ball-point.

If you do a google search on the 742 you'll hit a long description of disassembly about halfway down the first page, but I wouldn't recommend it unless the gun quits working entirely. Once you have the trigger assembly out and the forearm off, you can get at almost everything, given a little time and patience, solvent and q-tips. Just keep running the bolt back and forth, and cleaning over and over, until it's pretty clean.

Oh, and afterwards, don't leave that thing dry. Lightly oil EVERYTHING. If you ever get rust in the innards -- you don't want to know.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • mulefarm
      With the early ice out, how is the curlyleaf pondweed doing?
    • LakeofthewoodsMN
      On the south end...   The big basin, otherwise known as Big Traverse Bay, is ice free.  Zippel Bay and Four Mile Bay are ice free as well.  Everything is shaping up nicely for the MN Fishing Opener on May 11th. With the walleye / sauger season currently closed, most anglers are targeting sturgeon and pike.  Some sturgeon anglers are fishing at the mouth of the Rainy River, but most sturgeon are targeted in Four Mile Bay or the Rainy River.  Hence, pike are the targeted species on the south shore and various bays currently.   Pike fishing this time of year is a unique opportunity, as LOW is border water with Canada, the pike season is open year round. The limit is 3 pike per day with one being able to be more than 40 inches. All fish 30 - 40 inches must be released. Back bays hold pike as they go through the various stages of the spawn.  Deadbait under a bobber, spinners, spoons and shallow diving crankbaits are all viable options.   Four Mile Bay, Bostic Bay and Zippel Bay are all small water and boats of various sizes work well. On the Rainy River...  Great news this week as we learned sturgeon will not be placed on the endangered species list by the U.S. Fish and Wildlife Service.     The organization had to make a decision by June 30 and listing sturgeon could have ended sturgeon fishing.  Thankfully, after looking at the many success stories across the nation, including LOW and the Rainy River, sturgeon fishing and successful sturgeon management continues.   A good week sturgeon fishing on the Rainy River.  Speaking to some sturgeon aficionados, fishing will actually get even better as water temps rise.     Four Mile Bay at the mouth of the Rainy River near the Wheeler's Point Boat Ramp is still producing good numbers of fish, as are various holes along the 42 miles of navigable Rainy River from the mouth to Birchdale.   The sturgeon season continues through May 15th and resumes again July 1st.   Oct 1 - April 23, Catch and Release April 24 - May 7, Harvest Season May 8 - May 15, Catch and Release May 16 - June 30, Sturgeon Fishing Closed July 1 - Sep 30, Harvest Season If you fish during the sturgeon harvest season and you want to keep a sturgeon, you must purchase a sturgeon tag for $5 prior to fishing.    One sturgeon per calendar year (45 - 50" inclusive, or over 75"). Most sturgeon anglers are either a glob of crawlers or a combo of crawlers and frozen emerald shiners on a sturgeon rig, which is an 18" leader with a 4/0 circle hook combined with a no roll sinker.  Local bait shops have all of the gear and bait. Up at the NW Angle...  A few spots with rotten ice, but as a rule, most of the Angle is showing off open water.  In these parts, most are looking ahead to the MN Fishing Opener.  Based on late ice fishing success, it should be a good one.  
    • leech~~
      Nice fish. I moved to the Sartell area last summer and just thought it was windy like this everyday up here? 🤭
    • Rick G
      Crazy windy again today.... This is has been the norm this spring. Between the wind and the cold fronts, fishing has been more challenging for me than most years.  Panfish have been moving in and out of the shallows quite a bit. One day they are up in the slop, the next they are out relating to cabbage or the newly sprouting lilly pads.  Today eye guy and I found them in 4-5 ft of water, hanging close to any tree branches that happened to be laying in the water.  Bigger fish were liking a 1/32 head and a Bobby Garland baby shad.   Highlight of the day way this healthy 15incher
    • monstermoose78
    • monstermoose78
      As I typed that here came a hen.  IMG_7032.mov   IMG_7032.mov
    • monstermoose78
      So far this morning nothing but non turkeys. 
    • monstermoose78
      Well yesterday I got a little excited and let a turkey get to close and I hit the blind!!
    • smurfy
      good......you?? living the dream..in my basement playing internet thug right now!!!!!! 🤣 working on getting the boat ready.......bought a new cheatmaster locator for the boat so working on that.   waiting for warmer weather to start my garden!!!
    • monstermoose78
      How is everyone doing? Holy moly it’s chilly this morning I stayed in bed and will hunt later today when it warms up.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.