Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

Recommended Posts

Looking at getting a new lift dock.  Have checked pricing with Manicks, Eagle and Wright.  All are similar in price, one delivers free and will take my old dock, that's a pretty good savings.  Do any of you have experience with any of these builders?  Also, looking at getting a "L" on the end.  Only need about 25" long.  I have to pour a cement base.  They all charge approx $1000.00 for the slab which is about 1-1/3 yards of concrete.  I have a big hill to go down, so it would be a bummer carrying bags down the hill and mixing it.  I'm sure I'll save some money doing it myself, just wondering if any of you have done your own slab and how much did it cost?  Also, do any of them have any discounts at the sports shows in the spring?   BTW, my old dock is a mickey mouse permanent setup.   Thanks.

Link to comment
Share on other sites

Definitely Wright. His service is spectacular and you can't put a price on that!

Link to comment
Share on other sites

Cigar guy. I just had a new dock put in by Eric at Eagle docks and his service was excellent and the product is excellent. 

Link to comment
Share on other sites

I have had two docks installed by Eagle docks, service and workmanship were excellent.

Link to comment
Share on other sites

I have two docks one by Wright that has an L-shape end and one by Mannick.  Both good docks but one by Wright seems more sturdy.  I'm in Norwegian bay if you want to look and compare.  

Link to comment
Share on other sites

Thanks everyone for getting back to me.  Did any of you do your own cement base?  It will save me about $1000.00, but I'll (my kids) will have to hall about 75, 60lb bags of quikrete!  Norwaybay-pm sent.

Link to comment
Share on other sites

16 minutes ago, delcecchi said:

How are you going to mix 75 bags of quickcrete?  

If by hand you are in for a lot of heavy work! If you have a mixer, not quite as much work.

Cliff

Link to comment
Share on other sites

I was thinking of getting a couple of plastic kiddy pools and having 2 crews mixing.  Do you think we can get it mixed/poured properly?  Hate to go thru all the work and make a bad batch.  Neighbor does have a mixer, but just about impossible to get it to the spot.

Link to comment
Share on other sites

I have done two projects over the years that involved mixing concrete in a tub (they make special plastic tubs for this purpose).  Used a hoe to mix.  One was for the slab on a 10 by 10 shed, and the other was when I put drain tile in the basement.   It takes a long time to mix a couple bags with a hoe.  Maybe 10 minutes. 

Also I am not sure that wading pools will hold up.  The special tubs are much thicker and you can pour the mixed concrete out of them.   I don't know how you would get it out of a wading pool.  

http://www.homedepot.com/b/Building-Materials-Concrete-Cement-Masonry-Concrete-Tools-Mixers-Concrete-Mixing-Tubs-Pans/N-5yc1vZaq89

Can you get your hands on a pontoon to bring the mixer and quick crete to the site from the public landing?  I think it would be worth the trouble...

Edited by delcecchi
  • Thumbs Up 1
Link to comment
Share on other sites

I have used a paddle mixer attachment that runs off a drill, a bag in a five gallon bucket goes very quickly. We just did ten bags on a small gate project, and I was amazed at how fast that attachment mixed. Also, If you can find a regular masons mixing hoe, with the big holes in it, that's a big help also.

Link to comment
Share on other sites

Cigar Guy,

While up last weekend I noticed your brand new steps. It sure looks like you're developing a nice setup there. Good luck with the dock and slab. I don't have any recommendations.

Link to comment
Share on other sites

New steps?  Now I know what to look for.   :)

Sorry, too old to carry heavy loads....

Link to comment
Share on other sites

On ‎7‎/‎25‎/‎2016 at 0:40 PM, SkunkedAgain said:

Cigar Guy,

While up last weekend I noticed your brand new steps. It sure looks like you're developing a nice setup there. Good luck with the dock and slab. I don't have any recommendations.

Thanks,  Been a summer of work!  Steps and power washing/staining the cabin and garage.  Have to wait for the dock before we finish the landing by the lake.  It is a much-needed update!

21 hours ago, delcecchi said:

New steps?  Now I know what to look for.   :)

Sorry, too old to carry heavy loads....

But Del, It's only 58 steps!  Not to mention-downhill!

Link to comment
Share on other sites

On ‎7‎/‎19‎/‎2016 at 10:17 AM, norwaybay said:

I have two docks one by Wright that has an L-shape end and one by Mannick.  Both good docks but one by Wright seems more sturdy.  I'm in Norwegian bay if you want to look and compare.  

Wright doesn't want to go that far west.  Suggested  Manicks.

Link to comment
Share on other sites

21 hours ago, CigarGuy said:

Thanks,  Been a summer of work!  Steps and power washing/staining the cabin and garage.  Have to wait for the dock before we finish the landing by the lake.  It is a much-needed update!

But Del, It's only 58 steps!  Not to mention-downhill!

If it is the place with the brand new steps with the Alumacraft with 115, next to the place on the point with the sculptures, those steps only go half way up the hill.    You really need to come in by water, unless you are much hardier than I ever was...  75 bags at 80 pounds?  That's three tons.  4 or 6 trips by boat/pontoon.  

A grand is starting to look cheap.  (emoticon of exhausted guy here)

Link to comment
Share on other sites

Does anybody lift there docks out and put in themselves, or do you pay to have it done? 

Link to comment
Share on other sites

50 minutes ago, delcecchi said:

If it is the place with the brand new steps with the Alumacraft with 115, next to the place on the point with the sculptures, those steps only go half way up the hill.    You really need to come in by water, unless you are much hardier than I ever was...  75 bags at 80 pounds?  That's three tons.  4 or 6 trips by boat/pontoon.  

A grand is starting to look cheap.  (emoticon of exhausted guy here)

The top part is a gradual slope-about a 1/3rd the distance of the steps-a gentle " walk in the park"......  That is, compared to the stairway to Heaven!  I'm all for paying the extra to have it done, but my wife who won't touch a thing, thinks we should do it ourselves. I don't have access to a pontoon.  If we could ever get the folks were trying to buy the dock from to return our emails, we might have a new dock on order!  Not that it makes much difference, but the bags were only 60lbs :).  It's too bad a hillside lift is about 30,000.00.  If we stay there until I'm "old and grayer", I will have a lift. 

47 minutes ago, Barometer said:

Does anybody lift there docks out and put in themselves, or do you pay to have it done? 

The first lift-out is free after that they charge.  I bought an electric winch to do it myself once I get the dock.  Many people do it themselves.

Link to comment
Share on other sites

I have a vintage roll out dock, and do it with the help of the neighbors.  Usually pull it up the ramp with a car, but last year two neighbor guys pushed it up by hand before I could get the car...  Eddie is strong like bull. 

Link to comment
Share on other sites

Barometer:  I have 3 lift docks (one with "L") and one small straight dock that connects two of the lift docks.  We put in and take out all of the docks. We also hire a barge to pull out our boat lifts.

  • Thumbs Up 1
Link to comment
Share on other sites

18 hours ago, PortageBay said:

Barometer:  I have 3 lift docks (one with "L") and one small straight dock that connects two of the lift docks.  We put in and take out all of the docks. We also hire a barge to pull out our boat lifts.

I purchased a place that has lift docks and rails by Eagle that are real nice, but obviously heavy. I’m planning on rigging up equipment to lift those myself too, so just curious what other have done.

Link to comment
Share on other sites

We have two 48' docks, one has a 12'x8' "L".  Due to the weight and depth of water the L section needs to be moved via barge along with our 2 lifts.  Up to this point I have had them raise and lower our docks while they are there as well.  The service is not cheap, but then again it is hard to put a price on two additional weekends at the cabin not working on stuff.

Link to comment
Share on other sites

41 minutes ago, delcecchi said:

When does the humping of bags start?  I want to come watch

I sent out invitations to help last week-you were the first one on my list!  Still waiting for your response!  Seriously though, I had a run-in with the cable on my boat lift and my left index finger-my finger lost.  Ten stitches, almost lost my finger tip, spent 4 hours in Cook hospital.  Went in yesterday to have the stitches removed, Doc wants me to see hand specialist next Monday to see if any nerve damage.  Might have to wait for the bill to see if the dock is in the cards this year or next.  Regardless, the dock people will be pouring the slab-your off the hook Del:)

Link to comment
Share on other sites

Sorry, I missed the email/snail mail.  I had a new SD card in the camera and the batteries charged.  I was ready to become famous with a viral video on youtube.  

Sorry to hear about your finger.  The cook hospital guys are great.  They took good care of me last summer.

I had an abdominal hematoma and got a ambulance ride to duluth and a couple days of vacation in a nice hospital room.  I think the total bill was under 200 bucks, counting the ride and the cat scan.  But I am old and on medicare. 

Take care of yourself and don't wave your finger at me when I go by....

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • mulefarm
      With the early ice out, how is the curlyleaf pondweed doing?
    • LakeofthewoodsMN
      On the south end...   The big basin, otherwise known as Big Traverse Bay, is ice free.  Zippel Bay and Four Mile Bay are ice free as well.  Everything is shaping up nicely for the MN Fishing Opener on May 11th. With the walleye / sauger season currently closed, most anglers are targeting sturgeon and pike.  Some sturgeon anglers are fishing at the mouth of the Rainy River, but most sturgeon are targeted in Four Mile Bay or the Rainy River.  Hence, pike are the targeted species on the south shore and various bays currently.   Pike fishing this time of year is a unique opportunity, as LOW is border water with Canada, the pike season is open year round. The limit is 3 pike per day with one being able to be more than 40 inches. All fish 30 - 40 inches must be released. Back bays hold pike as they go through the various stages of the spawn.  Deadbait under a bobber, spinners, spoons and shallow diving crankbaits are all viable options.   Four Mile Bay, Bostic Bay and Zippel Bay are all small water and boats of various sizes work well. On the Rainy River...  Great news this week as we learned sturgeon will not be placed on the endangered species list by the U.S. Fish and Wildlife Service.     The organization had to make a decision by June 30 and listing sturgeon could have ended sturgeon fishing.  Thankfully, after looking at the many success stories across the nation, including LOW and the Rainy River, sturgeon fishing and successful sturgeon management continues.   A good week sturgeon fishing on the Rainy River.  Speaking to some sturgeon aficionados, fishing will actually get even better as water temps rise.     Four Mile Bay at the mouth of the Rainy River near the Wheeler's Point Boat Ramp is still producing good numbers of fish, as are various holes along the 42 miles of navigable Rainy River from the mouth to Birchdale.   The sturgeon season continues through May 15th and resumes again July 1st.   Oct 1 - April 23, Catch and Release April 24 - May 7, Harvest Season May 8 - May 15, Catch and Release May 16 - June 30, Sturgeon Fishing Closed July 1 - Sep 30, Harvest Season If you fish during the sturgeon harvest season and you want to keep a sturgeon, you must purchase a sturgeon tag for $5 prior to fishing.    One sturgeon per calendar year (45 - 50" inclusive, or over 75"). Most sturgeon anglers are either a glob of crawlers or a combo of crawlers and frozen emerald shiners on a sturgeon rig, which is an 18" leader with a 4/0 circle hook combined with a no roll sinker.  Local bait shops have all of the gear and bait. Up at the NW Angle...  A few spots with rotten ice, but as a rule, most of the Angle is showing off open water.  In these parts, most are looking ahead to the MN Fishing Opener.  Based on late ice fishing success, it should be a good one.  
    • leech~~
      Nice fish. I moved to the Sartell area last summer and just thought it was windy like this everyday up here? 🤭
    • Rick G
      Crazy windy again today.... This is has been the norm this spring. Between the wind and the cold fronts, fishing has been more challenging for me than most years.  Panfish have been moving in and out of the shallows quite a bit. One day they are up in the slop, the next they are out relating to cabbage or the newly sprouting lilly pads.  Today eye guy and I found them in 4-5 ft of water, hanging close to any tree branches that happened to be laying in the water.  Bigger fish were liking a 1/32 head and a Bobby Garland baby shad.   Highlight of the day way this healthy 15incher
    • monstermoose78
    • monstermoose78
      As I typed that here came a hen.  IMG_7032.mov   IMG_7032.mov
    • monstermoose78
      So far this morning nothing but non turkeys. 
    • monstermoose78
      Well yesterday I got a little excited and let a turkey get to close and I hit the blind!!
    • smurfy
      good......you?? living the dream..in my basement playing internet thug right now!!!!!! 🤣 working on getting the boat ready.......bought a new cheatmaster locator for the boat so working on that.   waiting for warmer weather to start my garden!!!
    • monstermoose78
      How is everyone doing? Holy moly it’s chilly this morning I stayed in bed and will hunt later today when it warms up.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.