Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
cray

Lund 1625 classic

3 posts in this topic

I am trying to fit a trailer to this boat. Does anyone know what trailer will fit this boat properly?

Share this post


Link to post
Share on other sites

I have a 2006 1625 Classic tiller w/30hp Honda along with a 6hp Yamaha kicker. I have a 1400# Yacht Club roller under it and it works fine for me. I have pics I could send ya with the boat on the trailer. Junky...........

Share this post


Link to post
Share on other sites

I have a 1400 shorelandr roller, it is 58 inches wide between the fenders. The boat sits over the fenders and ramps up towards the front. The rear sits at 50 inches and the bow is at almost 60 with the trailer level. The trailer Tongue attaches about 2/3 rds of the way up the boat so I cant drop the front keel rollers anymore.

I am looking at getting an 1800 lb shorelandr that is 68 inches wide between the fenders. My boat has a chine of 66.5 plus the spray rails. I really don't want to spend $1300 and find it sitting on top of the fenders again.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • Buzzbait Brad Ohio
      Thanks for having me Minnesota. I wasn't able to float the Ottertail river but I did fish the lake every morning. Most fish the first 3 days came on top water whopper plopper. The last day, the water temperature heated up to almost 80 so I changed it up a little bit and fished deep water 10-20 feet and caught fish deep. Here's some of the better fish from this week. The fishing up here is great. Can't wait to make it back. 
    • ZachD
      Nice job I will be out on Sat in the boat
    • hitthebricks
      Sounds like my problem, Thanks  
    • JBMasterAngler
      Small minnow raps, #2 mepps spinners, small spoons. Don't need anything else.
    • curt quesnell
      What a great day jigging out in the mud. Little or no wind all day and it was pretty warm but fish were active, biting and large. A big change came yesterday on my close by spots that threw me for a loop but the fish a few miles away seem unphased. I will say it again a great day!
    • monstermoose78
      Thanks for the advice Dave  I dont let Finn fetch on check cord any more. I only used it when he was a pup
    • Cliff Wagenbach
      There are public beaches at both Hoodoo Point in Tower and McKinley Park in Soudan. Cliff
    • leech~~
      In the summer they seem to be about 20' feet down over 50'-80' feet of water. We trolled small raps with what ever would get it down there. I also had down riggers to use.  You could try some deep hook and slip bobbers with a worm in some of the deeper bays to see if they will take it?  Good luck.
    • MinDak Hunter
      I have a bait/rigging question. The kids and I were out on Big Watab chasing a suntan and when I told them that the lake has trout they wanted to try for them but I mostly fish sunnies and crappies. What would I need to get to fish for trout out there? Looking back in the forums I see that some guys use leadcore (I'm not buying new rod/reels) and some use bobbers. Any advice on a common bobber set up? Also, I have an "active" 10 year old so it seems that jigging works best to keep him busy, any advice on jigging for trout?
    • fishingtime13
      Update! Water is way down! But I was able to get a smallmouth with a topwater plug.  And a catfish broke my leader off a  worm, was very confused. Going again tomorrow