• RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
Master_Chief

Anybody been on lida over the last few weeks?

Recommended Posts

Master_Chief

Just like the subject says... any activity on Lida lately?

Share this post


Link to post
Share on other sites
cliffy

My wife and I were out on Lida this past Sunday eve for about two hours. We had very limited amount of time to work with...late night hours. The water temp was in that 57-60 degree range and we caught a few walleyes....and a TON of Rock Bass. I dont care for the RB but they can be fun to catch.

Cliffy.

Share this post


Link to post
Share on other sites
Anylakeanytime

I have been out the last few weekends and it hasn't been hot and heavy by any means. A few walleyes, enough nothern, couple of smallies, too many rock bass...etc. I hope it will pick up.

Share this post


Link to post
Share on other sites
Scoot

Anylake, don't you have a new baby to take care of? Shouldn't you be at home instead of out fishing?!? tongue.gif

Share this post


Link to post
Share on other sites
Anylakeanytime

Baby's gotta eat...?

Share this post


Link to post
Share on other sites
CASTnBLAST

Stayed out there last weekend,the guys' I heard talkin walleyes were having a hard time catching them under the slot. Wife got into nice sunnies and crappies and the bass were bitin for me too.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • MinDak Hunter
      Hit Green for a couple hours this afternoon, almost zero traffic and the sunnies were active. It’s nice to see this lake is back!
    • jigginjim
      still frozen in?
    • CigarGuy
      Was out for a while on the Partridge River this afternoon, didn't have any minnows, managed one 13" crappie on Gulp waxes.  But, the old Strikemaster almost bottomed out-close to 30" of ice.
    • SkunkedAgain
      I don't know what your Helix 7 requires in the manual, but a quick look would figure out if that 3amp is too small. Definitely wire your sonar to the motor battery using the correct gauge wire and fuse. If you connect it to another battery, it should be a stand-alone. Connecting to the trolling motor battery will generate interference.
    • SkunkedAgain
      I've done cheeks quite a few times and they are always good. They take only a few seconds to carve out. I like to get the most out of the things I kill to eat, so I'm not afraid to pull them out of smaller ones. I'm glad to see that so many people picked up a new tip. That's the point of congregating on these forums. I wonder how many non-registered folks will read this and learn something new.
    • CigarGuy
      I've been doing them for many years.  Like Cliff, a friend who was a guide on LOW brought some out prior to the main course-been doing it since. 
    • Tom Sawyer
      With the snow cover completely gone and lots of standing water, 60s in the forecast, with plenty of sunny days next week, and a good chance of rain mid-week; this may be my last weekend on the ice, South of Hwy 210 anyway . Fish have really been on the chew
    • Alex wilhelmi
      hey guys..i installed the helix 7. took it out the other day. it keeps  randomly shutting down, with the motor off it will stay on no problem. Heres where i think i f'd up. i used the same 3 amp fuse harness from the old sonar that came with the boat, the old hb depth only kind. its wired right to the ignition wire. i used the correct gauge wire where i needed it. im guessing its not getting enough juice? also if i wired it direct to a separate battery, how do i go about hooking up and on board charger? or would i be ok just wiring direct to the battery that runs the motor? thanks for any advice. those musky lures look so bad ass! nice work !!
    • delcecchi
      Really small scallops
    • delcecchi
      I think it is a matter of the material involved.   Ethanol can corrode some metal and dissolve some organic stuff like rubber or plastic that gasoline doesn't affect.   Or so some sources say.