• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Join In - We Share Fishing Reports & Outdoor Information Here

     
      You know what we all love...

      The same things you do!!!! Share what you love & enjoy in the outdoors as well as thank those whose posts you 'appreciate.'

      Have Fun!!!

Sign in to follow this  
MarcumMan

BPS Walleye Angler Signature Series Spinning Rod

Recommended Posts

MarcumMan

Im looking to buy a new spinning rod for walleyes this season. I found the bass pro shops walleye angler signature series spinning rod and was wondering if anyone had any experience with one of these. I was looking at the 6' ML HM-85 Jigging rod. I would be mainly using this for vertical jigging and pitching jigs. I was also looking at a St. Croix Avid but with the price of the BPS rod, I could get a nice reel with it for around the same price of the St. Croix itself. Any comments? Thanks

Share this post


Link to post
Share on other sites
PerchJerker

The BPS trolling rods are great but I've never used one of their jigging rods so I can't really comment on that. Avids are one of my favorites though.

Share this post


Link to post
Share on other sites
Northlander

This series of rods is well worth the cost. The bottom bouncer rods are fantastic for the cost and the trolling rods have a great action to them with softer tips but still good back bone. The other rods that are good for the price is the Gary Roach rods. Reeds has them at a good price and plenty in stock.

Share this post


Link to post
Share on other sites
NEANGLER

i have one of the rigging rods and I love it, especially for the price.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • yoppdk
      I'm pretty sure there is a setting on your Hummer that lets you set where (voltage level) you want to get the "low battery" warning or dropout. At least mine does ... and I temporarily reset it once to keep it from dropping out each time I started the outboard. Of course I wouldn't advise that for a long-term fix as you might go to start the engine one time and get nothing but clicks. Is it possible that setting got changed at one time and maybe it's set too high?
    • chaffmj
      Well I got skunked on my first ever attempt to fish muskies. It was still a lot of fun and I will try it again!
    • Rick
      DNR urges people to use caution when operating farm equipment Exceptionally dry conditions in the northwest part of the state have contributed to several small fires over the past week. To prevent a possible wildfire, the Department of Natural Resources urges extreme caution when using farm equipment right now.  To reduce the chances of starting a wildfire when working in the field, follow these steps: Make sure machinery is well maintained and working properly to prevent overheating and the formation of sparks. When cutting or mowing, be aware of rocks that may cause sparks if struck by mower blades. Check that all fire extinguishers are appropriate for the size of the machinery, are fully charged, and are easily accessible. Carry an ABC rated fire extinguisher – it can be used for electrical and petroleum-based fires originating on the tractor and for vegetative fires. Check and remove combustible vegetation from motors, exhausts, ledges and brackets several times a day. Remove debris from the surface of the baler using a portable gas-powered leaf blower. Keep hay in groups of 10 bales or fewer and at least 100 feet away from structures or other ignition sources. Firebreaks – 30 feet of mowed grass, bare ground, or rock between bale groups – will help prevent fire from extending to additional bales. Frequently check to see if stored hay is hot or has internal fire (noted by a caramel or strong burning odor, visible vapor or smoke, strong musty smell, or all of the above). Do not move overheated or smoldering hay. Immediately call 911 if fire occurs and provide clear directions to your location. Check the weather – avoid running equipment on days with warm temperatures, high winds, and low humidity. Plan your day – take advantage of mornings and evenings that tend to have calmer winds, cooler temperatures, and higher humidity. Find more information about fire danger at mndnr.gov/burnrestrictions. ### Discuss below - to view set the hook here.
    • mrpike1973
      From what I'm hearing I believe I will just keep my K-Drill. I have no doubts whatsoever that Nils is a great product and Frank does awesome work on the blades. Many of my friends have used his services before. I drill a lot and almost always on dirty wind swept ice last year was terrible on the lakes I was on. 2 sets of blades for me last year first set got dull around January then replaced to the second set at the end of the year. I did call K Drill today they said that's normal for the usage I do. No cause for alarm at all. So I'm always looking for the grass is greener on the other side type person. No hurt feelings here fellas both are good augers and I will not say bad things about them just thought I was missing the boat but as someone said does it really matter if you get the hole drilled 2 seconds faster? It matters how many fish you pull up that hole😁
    • BobT
      Here's a thought that just occurred to me. I was having some similar issues with my sonar unit. While troubleshooting noise feedback from my trolling motor, one thing I tried was to add a ferrite core filter on the power cable to my HB 596c. Now that I think about it, I have not had a problem with my HB shutting down on starting my outboard since I added the filter. It's possible the ferrite core is attenuating the voltage fluctuation just enough.    Got the clamp-on filter online for less than $5.00. Something like this one from ebay. You need to get the right size to fit your HBs power cable. Mine was 1/4".   Inexpensive thing to try.
    • leech~~
      So there is Trout in there as well?  Where is this Holy Buckets Lake?  😯
    • BobT
      Now, I'm puzzled. Both units should therefore be experiencing the same brownout conditions when you start your outboard. I wonder if a surge suppressor might be helpful? Is the bow mount unit a newer unit and if so, maybe it has updated technology that is less susceptible to the voltage drop. I'm just thinking out loud now. 
    • Rick G
      Wow, nice gill😁
    • Fish Head
      Yes they are. 
    • Rick G
      Mr Pike, if you are going through blades that fast on the k-drill, you will certainly dull them out just as fast or faster on a Nils. The Ripper style blades that come on the K are about as good as it gets as far as durability goes.