• RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
Hookmaster

Morris Point or Adrian's

Recommended Posts

Hookmaster

I plan to come up for the day on Friday. Which would be better, Morris Point or over Pine Island on Adrian's road or is it a horse apiece? I plan to get up there by daybreak. What shallow depths (18-20) to try early and late and what depth for mid-day (27-30)?

Share this post


Link to post
Share on other sites
DJH

We were up last friday and saturday. Tried 17ft friday morning for 2 hours and nothing. Went out to 30ft just east of the snowmobile trail and had good luck. Fished the same spot both days till dark and fish were bitting off and on the whole time. Nice limit of walleyes and sauger for everyone and lots to put back also. Nothing big but lots of fun. I know the shallower 13 to 18ft water put out alot of big fish last weekend during the evening. Saw 3 guys at Adrains sat. night and they each nailed a 10 pounder from 13ft. of water.

Share this post


Link to post
Share on other sites
fiskyknut

This time of year for the early late bite I'd be thinking 14 fow and less myself.

Share this post


Link to post
Share on other sites
Hookmaster

DJH,

I'm going to show my ignorance of the lake but where is the snowmobile trail? Does it cross Pine Island and then head north?

Share this post


Link to post
Share on other sites
bturck

yes the sled trail crosses Pine to the east side of the island. It comes up the river and then over the island. It is signed and indicates NW Angle trail. They are black stakes. If you come off of Wheelers Point you will need to slide to your right and pick it up as it enter 4 mile bay from the river. Bill

Share this post


Link to post
Share on other sites
DJH

Well said bturk! Just remember no trucks are allowed on the trail if its still staked.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • CigarGuy
      Was out for a while on the Partridge River this afternoon, didn't have any minnows, managed one 13" crappie on Gulp waxes.  But, the old Strikemaster almost bottomed out-close to 30" of ice.
    • SkunkedAgain
      I don't know what your Helix 7 requires in the manual, but a quick look would figure out if that 3amp is too small. Definitely wire your sonar to the motor battery using the correct gauge wire and fuse. If you connect it to another battery, it should be a stand-alone. Connecting to the trolling motor battery will generate interference.
    • SkunkedAgain
      I've done cheeks quite a few times and they are always good. They take only a few seconds to carve out. I like to get the most out of the things I kill to eat, so I'm not afraid to pull them out of smaller ones. I'm glad to see that so many people picked up a new tip. That's the point of congregating on these forums. I wonder how many non-registered folks will read this and learn something new.
    • CigarGuy
      I've been doing them for many years.  Like Cliff, a friend who was a guide on LOW brought some out prior to the main course-been doing it since. 
    • Tom Sawyer
      With the snow cover completely gone and lots of standing water, 60s in the forecast, with plenty of sunny days next week, and a good chance of rain mid-week; this may be my last weekend on the ice, South of Hwy 210 anyway . Fish have really been on the chew
    • Alex wilhelmi
      hey guys..i installed the helix 7. took it out the other day. it keeps  randomly shutting down, with the motor off it will stay on no problem. Heres where i think i f'd up. i used the same 3 amp fuse harness from the old sonar that came with the boat, the old hb depth only kind. its wired right to the ignition wire. i used the correct gauge wire where i needed it. im guessing its not getting enough juice? also if i wired it direct to a separate battery, how do i go about hooking up and on board charger? or would i be ok just wiring direct to the battery that runs the motor? thanks for any advice. those musky lures look so bad ass! nice work !!
    • delcecchi
      Really small scallops
    • delcecchi
      I think it is a matter of the material involved.   Ethanol can corrode some metal and dissolve some organic stuff like rubber or plastic that gasoline doesn't affect.   Or so some sources say.     
    • Tom Sawyer
      I guess I was being to kind. Nah nah nah nah, ....Turn out the lights already. LMAO!How Disappointing. Wolves your next......
    • ProGuideEyes
       Did you leave vermilion Tom???