• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Join In - We Share Fishing Reports & Outdoor Information Here

     
      You know what we all love...

      The same things you do!!!! Share what you love & enjoy in the outdoors as well as thank those whose posts you 'appreciate.'

      Have Fun!!!

Sign in to follow this  
duck2

Design Ideas for a 2 - 3 person permannent deer stand

Recommended Posts

duck2

I would like to replace a delapidated old stand back in my woods with a comfortable stand which would also double as a wildlife observation platform. I am thinking about something essentially 4'x8' in floor size with some walls and a roof. Does anyone perhaps have any photos or other tips I can incorporate in designing and building a stable and comfortable woodland retreat. I will have the luxury of being able to stabilize the structure by connecting it to a large tree trunk.

Thanks

Share this post


Link to post
Share on other sites
Coach1310

I think it may be easier to build it freestanding, meaning it would be on poles rather than attached to the tree. If I remember I will snap a couple of pics of some of ours for reference. In case I forget, we used telephone poles for the poles, about 3 ft in the ground secured with concrete. just build a basic stick frame shelter on top...pretty simple if you have the equipment.

Share this post


Link to post
Share on other sites
NELS-BELLS

This was a topic a while back. Maybe it will help you get some ideas. Scan down and you will see a photo of the stand that I built this past summer. I took a nice doe out of it last weekend with my 2 kids there. They were more excited than I was, which made the time and money to build it all worth while.

http://www.fishingminnesota.com/forum/showflat.php?Cat=&Number=866198&page=11&view=collapsed&sb=5&o=&fpart=1

Nels

Share this post


Link to post
Share on other sites
gizmoguy

duck2, post your email. I have plans in an excell drawing format and photos. Free standing tower. Can be made 4x4 or 4x8. With a roof if you want. All green treat wood. Will last for 30 years. I don't even have to check my stand before the season. I know it is ready to go. Very safe to climb into. The whole stand is bolted and screwed together.

Share this post


Link to post
Share on other sites
gizmoguy

some photos

120_2043_r1.jpg

smallstand.jpg

Share this post


Link to post
Share on other sites
kentuck_ike

Hey Gizmoguy,

I'd love to see some plans too if you wouldn't mind e-mail them to me.

[email protected]

Thanks, Ike

Share this post


Link to post
Share on other sites
SSSTaxidermy

Me too gizmoguy, if you don't mind, I would like to see your excel plans..

[email protected]

Thanks

Share this post


Link to post
Share on other sites
tunrevir

I'd like to post a photo of our deerstand over in Wisc and will try to e-mail you the jpeg file. Two ideas though, FF a certain big box store has a steel frame to which you attach you lumber and put up, or go to Menards and get on the computer there and build and "elevated deck to the demensions you'd like. I have also thought that a person could build a platform at the required height size and then anchor a pop up type portable blind to the deck that way you can put it up early and then take it down after the season and you have minimal lumber costs involved. Just a thought. I'll try to get the jpeg to you.

Tunrevir~

Share this post


Link to post
Share on other sites
duck2

Gizmoguy,

Thanks for the offer and the inspirational pictures. I am

[email protected]

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • ANYFISH2
      Nice work Borch! Or maybe I should say Mrs. Borch?   Looks like I missed out.
    • papadarv
      Keys to make the blade work well. *Sharp! *Cutting edge needs to line up to the Gullet of the opposite blade! *Add a .020 shim 1/8" wide between blade screw and cutting edge. Increases cut angle to same as K-Drill! I'm working on another set welding  1/4" piece of blade to the outside blade edge extending the blade 1/2" past auger flight making it a full 8" hole. Note how the K-drill blade extends 1/2" past the auger flights.  
    • leech~~
      I like your blade work as well. Two summers ago when I sold my hand auger at my garage I think I throw out about 4 sets of those old blades as well!  😣
    • papadarv
      Made the drill point out of a spade drill bit welded to a 3/8” 16 bolt/screw than cut & ground to shape the point. Drilled & tapped center of blade bracket. Tap slowly as that steel seem a grade or two above basic mild steel.
    • bluewater2
      Thank you  
    • leech~~
      That is some sweet work right there. I see these at garage sales all summer, may be I should start picking them up?  Looks like you added a drill point on the end of them as well. The adapters and the end point are key items on making these right.
    • papadarv
      I went a different route, got several vintage Mora 7 1/2" hand augers $10 to $15 each with the old hardened sweedish steel blades modified to replicate K-drill style blades #5. Went with clam plate 3/4" drive bit & M18 Fuel Mud Mixer worked ok on early ice #1. Wanted to try my DeWalt/Jiffy so converted to the 7/8" drive bit, didn't have the power to cut the agressive blade #2. Later ice in Wheelhouse, went with my Eskimo 43cc with a Walker 25' flex exhaust out the door, cut 32" ice in 27 seconds #3. Ran 4 1/2 holes to 1 of my buddies new green ION 8in. Made some adapters to put the 7/8" auger bits on my Clam Plate and Mud Mixer#4 for early ice this comming season.
    • Wanderer
    • ANYFISH2
      OUCH!!! 6 players down to injury in one game.  We were thin at O-line depth before, now we have "1st" line players having to play nearly an entire preseason game, because we dont have enough bodies!  This is going to be major issue going forward.   Overall, not a good showing offensively. Jacksonville is a very good defensive team, but we definitely need to be better.   Defense, look pretty good!  We need to complete turnover chances, at a better rate.     3rd RB race is going to be fun to watch.   Special teams, are kinda leaving me wondering.  Punt coverage is quite shaky.  Carlson is looking more like our guy, after Forbath missed a 41 yd fg.
    • Borch
      That's ok.  Was a good day on the water.  Took my wife out this afternoon and had a nice day fishing.