• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Join In - We Share Fishing Reports & Outdoor Information Here

     
      You know what we all love...

      The same things you do!!!! Share what you love & enjoy in the outdoors as well as thank those whose posts you 'appreciate.'

      Have Fun!!!

Sign in to follow this  
Luck e 1

Fall on the river

Recommended Posts

Luck e 1

I have fished below Ford dam a few times and like the area. Does Anyone have any fall strategies for walleye fishing in the area? It will be my first time fishing the river in the fall.

Thanks guys.

Share this post


Link to post
Share on other sites
Cbreeze

Was out last week and bite had not yet started. Water temp needs to be in he mid 50's to really get things going. Fish can be caught now though but not like in a few weeks. Jig and minnow or lindy style and minnow would be my 1st choice right now. Early morning or evening seem to be the best. In a couple weeks, the plastic bite will start...ringworms and grub style baits. Purple/chart tail, black/white tail, oystershell are my go to colors in the fall. No bait needed this time of year. You will see lots of sauger here pretty soon as well. 3 ways w/cranks can be deadly this time of year too. Hair jigs in darker colors can be great too. Black, black w/green head. Hope this helps...

Tuna grin.gif

Share this post


Link to post
Share on other sites
rosspj59

Thanks for the info Cbreeze, I usually head down to Red wing for the good fall bite, but I might stay closer to town this november if I can figure out the bite on upper pool 2.

Share this post


Link to post
Share on other sites
Luck e 1

Yeah thanks for the info.

I would bet the temps will be in the 60's soon but we need colder nights to hit 50's. I would bet the eyes would be in the current and one could float the river and do well. I can't wait to try this.

Share this post


Link to post
Share on other sites
long caster

Went out of hidden falls last night, what a zoo!!! Last night was the most busy i have ever seen it down there, a lot of idoits out for the last cruz of the year.

Anyway, water temp was 60.4. Caught 2 small white bass and a 20" eye right at dusk. Trolling cranks in 7-10'. Didn't try by the dam, but will give it a shot here soon to see for myself what it is all about. Good luck.

Share this post


Link to post
Share on other sites
Luck e 1

WHere is hidden falls?

I am going to get out Friday and will send a full report when we get done.

Share this post


Link to post
Share on other sites
long caster

Hidden falls is the boat launch/park just down stream from the ford dam. Good luck.

Share this post


Link to post
Share on other sites
pike11

Was on the river all day today,(10/5)...water temp still too warm,about 62deg after all this dang sun...caught lots of fish,4lb wally 2blks north from miss,minn rivers,several other smaller ones by the dam trolling crankbaits,2 5lb pike also...the bigger wally came on lindy rig

Share this post


Link to post
Share on other sites
rosspj59

Glad to hear you caught some fish, and thanks for the report! I was thinking about trying it down there as it seems like upper pool 2 is a good place to get out of the wind that we're going to have all weekend.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • ANYFISH2
      Nice work Borch! Or maybe I should say Mrs. Borch?   Looks like I missed out.
    • papadarv
      Keys to make the blade work well. *Sharp! *Cutting edge needs to line up to the Gullet of the opposite blade! *Add a .020 shim 1/8" wide between blade screw and cutting edge. Increases cut angle to same as K-Drill! I'm working on another set welding  1/4" piece of blade to the outside blade edge extending the blade 1/2" past auger flight making it a full 8" hole. Note how the K-drill blade extends 1/2" past the auger flights.  
    • leech~~
      I like your blade work as well. Two summers ago when I sold my hand auger at my garage I think I throw out about 4 sets of those old blades as well!  😣
    • papadarv
      Made the drill point out of a spade drill bit welded to a 3/8” 16 bolt/screw than cut & ground to shape the point. Drilled & tapped center of blade bracket. Tap slowly as that steel seem a grade or two above basic mild steel.
    • bluewater2
      Thank you  
    • leech~~
      That is some sweet work right there. I see these at garage sales all summer, may be I should start picking them up?  Looks like you added a drill point on the end of them as well. The adapters and the end point are key items on making these right.
    • papadarv
      I went a different route, got several vintage Mora 7 1/2" hand augers $10 to $15 each with the old hardened sweedish steel blades modified to replicate K-drill style blades #5. Went with clam plate 3/4" drive bit & M18 Fuel Mud Mixer worked ok on early ice #1. Wanted to try my DeWalt/Jiffy so converted to the 7/8" drive bit, didn't have the power to cut the agressive blade #2. Later ice in Wheelhouse, went with my Eskimo 43cc with a Walker 25' flex exhaust out the door, cut 32" ice in 27 seconds #3. Ran 4 1/2 holes to 1 of my buddies new green ION 8in. Made some adapters to put the 7/8" auger bits on my Clam Plate and Mud Mixer#4 for early ice this comming season.
    • Wanderer
    • ANYFISH2
      OUCH!!! 6 players down to injury in one game.  We were thin at O-line depth before, now we have "1st" line players having to play nearly an entire preseason game, because we dont have enough bodies!  This is going to be major issue going forward.   Overall, not a good showing offensively. Jacksonville is a very good defensive team, but we definitely need to be better.   Defense, look pretty good!  We need to complete turnover chances, at a better rate.     3rd RB race is going to be fun to watch.   Special teams, are kinda leaving me wondering.  Punt coverage is quite shaky.  Carlson is looking more like our guy, after Forbath missed a 41 yd fg.
    • Borch
      That's ok.  Was a good day on the water.  Took my wife out this afternoon and had a nice day fishing.