I recently purchased an older 14ft with 25hp tiller. I noticed right away that it comes off the trailer really hard. I was out last night and noticed that a couple of the keel rollers are stuck/hard to roll.
Any tips or suggestions on repairing or replacing the rollers would be appreciated. Is the best way to unload at local "not busy" lake and work on it in the parking lot?
I have a few days off so hopefully fish 4 days in a row from sunrise to sunset. Likely two or three lakes a day depending on the bite. I won't fish any well known opener lakes until the weekday.
I might have missed a guess, but here are the ones that I noted:
JerkinLips – March 27th, then April 7th
Brianf. – March 28th
Bobberwatcher – April….
MikeG3Boat – April 10th
SkunkedAgain – early April, then April 21st
Definitely a tough year for guesses, as it seemed to be a no-brainer early ice out. Then it got cold and snowed again.
Question
DTro
I recently purchased an older 14ft with 25hp tiller. I noticed right away that it comes off the trailer really hard. I was out last night and noticed that a couple of the keel rollers are stuck/hard to roll.
Any tips or suggestions on repairing or replacing the rollers would be appreciated. Is the best way to unload at local "not busy" lake and work on it in the parking lot?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts