• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • WE CREATE LONG TERM, MEANINGFUL RELATIONSHIPS IN HERE ... PLEASE JOIN US.

    You know what we all love...

    RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE
    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

  • 0
Sign in to follow this  
bkft

Replacing Trailblazer Low Beam Headlight

Question

bkft

Anyone have advice on replacing a headlight bulb on a 2002 Chevy Trailblazer? Manual says nothing about it. When I search online, all I get are stores selling bulbs. Frustrating. Thanks in advance.

Share this post


Link to post
Share on other sites

4 answers to this question

Recommended Posts

  • 0
Macgyver55

Not sure if Trailblazers are the same but most (or at least many) of the GMs have either 2 pins or 2 bolts that come out from the top...(open hood to access them ) once these are removed the whole headlight assy will come out and the bulb is easy to get at. Squeeze the unlock clip and turn!

Share this post


Link to post
Share on other sites
  • 0
Ole1855

I don't know if the Trailblazer is different than a Suburban or Yukon but on my Yukon you just turn the bulb out of the back of the headlamp housing and change the bulb.

Ole

Share this post


Link to post
Share on other sites
  • 0
Macgyver55

You must have a newer Yukon than my Tahoe. On the pre 2000 models I dont think you could squeeze a hand in to get the bulb out without removing the housing.

Since my other post I looked at my buddies 2004 Chevy pickup and it only uses a single pin. Pull it out and the housing is out in 10 seconds. wink.gif

Share this post


Link to post
Share on other sites
  • 0
Ole1855

Yup, I have an 01, it's pretty easy.

Ole

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

Announcements



  • Your Responses - Share & Have Fun :)

    • eyeguy 54
      I like the stretch upriver better but can only drift down that area.  I would wear my arms out traveling up stream!   Hopefully do a drift down soon.  
    • jhousenga
      59 crossing Daisy Bay Friday night. 67 in Big Bay this afternoon.
    • monstermoose78
      The stearms in the arrowhead are small very small I would recommend a 6 foot or short rod for most streams as you will be pitching your bait out. They are also over grown with brush wading these streams is a challenge. You will be fishing for mostly brook trout above the first posted boundary FYI it’s normally a large water fall but not always. Also the first week of June there will not be much from the lake to the first posted boundary anyways. Remember there special regs below the first posted boundary and the above the first posted boundary.  If you want to use your fly rod I would hit the small trout lakes in the area. A split shot and small chunk of crawler is my go to bait for Brookies. There are a few streams with some browns and rainbows but very few. If you are fly fishing look at Thompson lake by  devilstrack lake it’s catch and release. Mink lake, kimball lake are also good. 
    • Squirrelhawke
      Growing up in South Dakota I did quite a bit of fishing in the black hills for browns and rainbows, most of that fishing was best accomplished with a long pole and just drifting my bait down the stream if you can read the eddies and slacks in the water you should do fine.  Of course I'm assuming they bite the same up north as they do out west.  It was a kick when I went  back out there 2 years ago and on Sunday morning fished the little 6 ft wide stream running behind the campground, all the other campers were amazed that I would pull out a fish about every 20-30 ft no monsters but plenty of little beauties at 7-10 inches. If the water is clean and the fish are there you just gotta find out what they are eating at that time of year.  Hopefully this helps and if I'm wrong some of the guys with Minnesota experience will pipe up. 
    • Squirrelhawke
      I do a bit of fishing from the coon rapids dam on down to 694 and I usually bring 2 rods because I lose at least one lure to the rocks. Bear that in mind and also realize that there are nice smallies, eyes and cats in that stretch of river. I also had over 3 feet of pike eat my stink bait I had out for channel cats. If I didn't have a circle hook on it would have been a nice pic to share. Good luck and hope to hear of some good luck. 
    • delcecchi
      It would take a lot of code to make multiple windows tiling the screen work, would be my guess, and would create few additional sales so isn't worth the expenses.    Just pick up an inexpensive 5 to 7 inch unit and use it for the map.   
    • Wanderer
      You look like the Phantom Fisherman - except the toes.  Or maybe the River Detective  🕵️‍♂️ Gotta love those good runs in short times!   
    • Bryan P
      Awesome Eyeguy! That is a good run of smallies there. I like your spot, that was my favorite fishing stretch for them when I lived in St cloud. Mississippi is such a great smallie fishery. Im blessed to live right next to it too. Now lets get the current to go down some! 
    • eyeguy 54
      I LOVE SMALLIES !  LOL  I am blessed to live close to so much fun. 
    • pikeandchester
      Spent a couple hours on Elysian this afternoon.  Drove around some shallow areas on the south east end of the lake with the trolling motor and only saw carp. Water is still unusually clear for this lake, at any time of the year, and 79 degrees near shore. May be a great opportunity for a bow fisherman, even in the daylight. Tried soaking minnows in a hole on the north end with no luck.