• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • WE CREATE LONG TERM, MEANINGFUL RELATIONSHIPS IN HERE ... PLEASE JOIN US.

    You know what we all love...

    RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE
    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
joe joe

help on mille lacs

Recommended Posts

joe joe

i'm camping at the state park on the south side of the lake stay there for a week next week and my goals are a walleye over 30" and a muskey and if anyone has info or that could kinda help me on getting my goals it would be nice the boat i'll be in is a 18ft aluma craft with a 85 tiller so if you see me next week don't be scared to wave or honk

Share this post


Link to post
Share on other sites
Guest

Work the bay the state park is on with big spinnerbaits or bucktails in the weeds for Muskies. As far as a 30inch Walleye? Try pulling spinners on top and the deep sides of the gravel and rock bars out from the bay your staying in. Good Luck

------------------
MILLE LACS AREA GUIDE SERVICE
651-271-5459 http://fishingminnesota.com/millelacsguide/
click here

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

Announcements



  • Your Responses - Share & Have Fun :)

    • YellowFinRed
      Have only been out a couple of times now but did get a 5.5 lb walleye my first 10 minutes out in 16 feet of water. Lots of fish in the 16-20 feet range. No jumping in the boat but catching fish on the mid lake areas. I'll be darned if I'll sit under a bridge with other boats when you can catch fish out on the lake without others boaters around.
    • Gillraker
      Any reports from Buffalo?  I would imagine that they are doing OK right out in front of the marina/beach.  Anybody?
    • DonkeyHodey
      agree with gimruis.  look to the river. Your chances of catching a 3# bass or better are exponentially better on the river.  (There's a reason SC/mississippi was chosen for the Gov's opener last year--the Mississippi around here is really a world class smallmouth fishery.)  (most river rats will tell you that you can essentially catch smallies any time of year and often as by-catch while targeting other species.)  Below the SC dam is pretty much catch and release only (all 12-20 inchers must be released) but it's quite loaded with big smallies! (and lots of good shore areas on public land)  Just be prepared to lose a few lures on snags... Frankly, If you want to stick to lakes, I think you can pretty much pick a lake in a 30 mile radius...--most produce bass in good quantity, it's just years may vary in terms of sizes.  Clearwater is good.  Consider Bass lake adjacent to it.  (...it's not just a clever name.)
    • Wanderer
      Haha!  Based on our conversation at the truck I’m going to edit that comment a teeny bit!  Cuz I know both of us had a workout.  I was still sore yesterday but it was a good sore. 😎
    • gimruis
      I like Clearwater too.  I haven't fished in in a couple years now but I used to and we caught a lot of fish out there.  The one negative was all the competition - there seemed to be a tournament almost every weekend. Another overlooked place to target smallmouth: RIVERS.  The Sauk River and the Mississippi between St Cloud and Elk River is plum full of bass and receives minimal fishing pressure (its just my opinion but rivers in general are very under fished here in MN).
    • Stephen L Johnston Jr.
      Thanks for the share Fitz! I noticed you guys had a couple of nice ones on saturdays event, i was curious how thatcame about. Congratulations on the crazy weekend!
    • Uncle Levi
      I have an STP frog cutter so I make my own.  
    • Surface Tension
      The torque tab counters the pull caused by the rotation of the prop.   Trimming the outboard in or out(up & down) can make a pull show up or go away.   Your Merc uses an allen wrench or a socket and extension to reach the bolt to loosen the torque tab.  Merc uses a right hand rotation.  If the bow wants to turn right by itself you would move the torque tab towards to the center.
    • ANYFISH2
      Thanks, a day well spent with a good person for sure. Thanks again for the work you put in at the end of the trip!  Your fishing needs to get in better shape I think!😓
    • Wanderer
      You and that Senko were dialed in, no doubt about that!  I think if the wind wasn’t as harsh we could’ve explored the deeper water a little better and maybe got the jig bite dialed in on the hens.  Either way it was a fantastic fishing experience. Some day I’ll try a Senko - maybe. 😃   I think you’ll do very well there this weekend.  Thanks again for taking me with.  It was the best day of open water fishing I’ve had for some time, both fishing and partner wise.