Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

Elk River area


ozzie

Recommended Posts

Have been out shore fishing a few times catching all that the river has to offer.  I decided to buy a little jon boat to use in the area.  It is a 12' jon boat with a 4hp 4stroke engine.  I know when the river is high this rig will most likely not go up river, but when the river is at it's normal current, do you think this will be enough HP to push me up the river?  Just hope to get to different shorelines and holes to see what they offer and explore the wonderful river!

  • Thumbs Up 1
Link to comment
Share on other sites

  • 3 weeks later...
  • 'we have more fun' FishingMN Builders
On 8/16/2023 at 10:23 AM, ozzie said:

Have been out shore fishing a few times catching all that the river has to offer.  I decided to buy a little jon boat to use in the area.  It is a 12' jon boat with a 4hp 4stroke engine.  I know when the river is high this rig will most likely not go up river, but when the river is at it's normal current, do you think this will be enough HP to push me up the river?  Just hope to get to different shorelines and holes to see what they offer and explore the wonderful river!

Did you ever give the up river run a shot?  Would be interesting to know.  👍

Link to comment
Share on other sites

I was able to get on the river once so far, and tested the boat set up, and it was more than powerful enough to push me upstream.  I am going to do some modifications to the craft to give me more floatation by adding float pods to the rear as my 220 frame sitting in the back squats a little.  I am satisfied with this setup so far and after a few adjustments, I will love this set up!  It is so light and easy to load and unload and the motor gets me going a little more than 6mph which is just enough to move me from spot to spot.  In the future I have thoughts of a trolling motor and a small graph and this will be a river slaying machine!

  • Thumbs Up 2
  • Thanks 1
Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders
4 hours ago, ozzie said:

I was able to get on the river once so far, and tested the boat set up, and it was more than powerful enough to push me upstream.  I am going to do some modifications to the craft to give me more floatation by adding float pods to the rear as my 220 frame sitting in the back squats a little.  I am satisfied with this setup so far and after a few adjustments, I will love this set up!  It is so light and easy to load and unload and the motor gets me going a little more than 6mph which is just enough to move me from spot to spot.  In the future I have thoughts of a trolling motor and a small graph and this will be a river slaying machine!

If the nose is running high, sometimes a tube of sand in the bow will help level things out. 👍

  • Thumbs Up 2
Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders

Is this kind of the idea you have to add some rear lift?  👍

 

 

  • Thumbs Up 1
Link to comment
Share on other sites

Yup exactly what I have in mind.  There is a company in the St Cloud area that is called Backwater Inc. and they make them.  They are going to install them for me also.  Mine will be welded on though.

  • Thumbs Up 2
  • Thanks 1
Link to comment
Share on other sites

  • 10 months later...

Just thought I would provide an update....the river is high and fast.  I have been down there multiple times during the course of the year and the fishing has been poor with water moving so fast.  I have tried 3oz weights and they tumble like nothing down the river.  Have not attempted to launch the boat out there.  I have been on the Rum a bit with the boat and that is a fun navigational voyage!  Not a lot of fish caught but some.  Regarding my boat set up, I did upgrade the 4hp up to a 6hp.  has just enough power to go where I need with a passenger.  next step is to weld up something to mount a bow mount trolling motor and I will have a solid fishing machine for small lakes and rivers. Hope everyone is out there enjoying our summertime open water!!

 

  • Thumbs Up 4
Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders
30 minutes ago, ozzie said:

myboat.jpg

Looks like you got it set up pretty nice with comfy seats. How did the rear floats you added work? 

  • Thumbs Up 1
Link to comment
Share on other sites

they have been great!  Provide more stability and floatation to the rear of the boat where it was needed with my 230lb frame with the motor back there.  They also make the boat look pretty "mean" for a small little jon boat :)  The only downside to them is now I have to figure out a trolling motor since I cant put one off the rear, and I have to get creative to mount a transducer.  Currenly i just suction cup a vexilar transducer to the side of the boat. I am planning on adding a motorguide kayak 36" shaft trolling motor to the bow.  I just need some welding on the front, but I have to customize it so the boat still can fit on my trailer properly, as I have bumpers that create a little logistical snafu.  

 

  • Thanks 1
Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders
3 hours ago, ozzie said:

they have been great!  Provide more stability and floatation to the rear of the boat where it was needed with my 230lb frame with the motor back there.  They also make the boat look pretty "mean" for a small little jon boat :)  The only downside to them is now I have to figure out a trolling motor since I cant put one off the rear, and I have to get creative to mount a transducer.  Currenly i just suction cup a vexilar transducer to the side of the boat. I am planning on adding a motorguide kayak 36" shaft trolling motor to the bow.  I just need some welding on the front, but I have to customize it so the boat still can fit on my trailer properly, as I have bumpers that create a little logistical snafu.  

 

My transducer I mounted the bracket with counter sunk heads on a aluminum plate.  I then cleaned a spot on the back of the boat and siliconed the plate with bracket on the transom.  Wasn't sure how long it would last but it's been on there for about 16 years!  :)

  • Thumbs Up 2
Link to comment
Share on other sites

21 hours ago, ozzie said:

I have been on the Rum a bit with the boat and that is a fun navigational voyage!  Not a lot of fish caught but some. 

 

I tried the Rum near Princeton last week and the water was definitely flowing pretty good for mid July.  Slightly murky too which was not good for smallmouth fishing.

 

Caught 22 of them in about 4 hours but they were all dinks, 11-15 inchers.  Most of them came on topwater.  I used to fish it every season several times in midsummer but we've had drought 3 out of the last 4 years and it was just too shallow.  I saw hundreds upon hundreds of crayfish on the bottom of the river.

  • Thumbs Up 1
Link to comment
Share on other sites

I have hit the rum at the Mystic landing and then also in the Dalbo/Walbo area off 95.  Caught small walleyes redhorse and a few small smallies.  Last night saw a few shore fisherman catching crappies in a side channel.  I am thinking of trying the Rum around Lake George area as it appears there is some deeper water in that area.  Just fun to be able to hit the small rivers and navigate them!

 

  • Thumbs Up 3
Link to comment
Share on other sites

Ozzie,

 

I’m assuming your boat hull is a single layer?  If you have a safe spot for it, you can mount your transducer inside and shoot through the hull.  Or, like when I’m running my little river boat with a portable ice fishing unit, I just set the transducer on the bottom by the seat where the sonar is sitting.  If you have a clean area and it’s sitting in water, it reads just fine.  If you mount it, use epoxy and make sure you have the bubbles out.

 

Little river boats can make a ton of great memories! 

  • Thumbs Up 2
  • l Love It 1
Link to comment
Share on other sites

  • 4 weeks later...

Have been getting out on the Mississippi a few times exploring the area...found a few smallies here and there but the big cats that we were finding last year are just not being located...yet!  Also have been hitting the rum and finding a mixed bag of fish each time out.  Good luck

  • Thumbs Up 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

  • Your Responses - Share & Have Fun :)

    • Kettle
      Walked today and yesterday, flushed 9, shot at two and got two. Hopefully next year I'll have a dog to hunt with. Still warm up here, skim of ice on ponds. Weather has been nice. Hopefully walk a bit more the next few weeks. Been pretty cautious walking for birds to not interfere with deer hunters. There sure are not the deer hunters there used to be 
    • LakeofthewoodsMN
      On the South Shore...  The focus for many this week is the ongoing deer hunting season which is a big tradition in these parts, even for avid walleye anglers.  There were some that either already harvested their deer or are more into catching fall walleyes than hunting.     Those that are fishing are taking advantage of the unseasonably warm weather and excellent walleye and sauger bite that is happening across the lake.  Cold weather is in the forecast in the upcoming days and weeks so that is also getting many excited. The best depths on the south end of LOW are 22-28 feet of water.     Vertical jigging with frozen emerald shiners is catching most of the walleyes, saugers and jumbo perch.  Depending upon where on the lake you are fishing, some slots and big trophies are in the mix as well, but most reports are talking about good numbers of eaters.    Jumbo perch are coming in good numbers this fall which will serve ice anglers well.  Watch out for an occasional pike or even lake sturgeon mixed in with the walleyes.      There are good numbers of walleyes and saugers across the south shore which is setting up nicely for early ice.   On the Rainy River...  There continues to be good numbers of shiners in the river, and consequently, there are good walleyes in the river as well.     Walleyes along with saugers, pike and some sturgeon are coming in up and down the river.  Most walleyes are being caught in 10-25 feet of water in various stretches of the river.   Jigging with live or frozen emerald shiners is the key. Some anglers are also still slow trolling crankbaits upstream to cover more ground and find fish. Both methods are producing solid results. Sturgeon fishing remains strong.  The catch-and-release sturgeon fishing is open into the spring when it changes to the "keep season" on April 24th. Up at the NW Angle...  As temps are getting colder, most are in the woods hunting and not fall fishing, however, for those who bundle up, fishing continues to be excellent.     A nice mixed bag with walleyes, saugers, perch, pike and crappies being caught. Very good muskie fishing with the colder water temps and shorter days.  Some big fish and some good numbers are being caught amongst the islands.  Both casting and trolling is getting it done.  
    • gimruis
      I hunt in the rifle zone so I don't have a need to use a shotgun to hunt deer, but I would be looking at this if there was ever a need to.   There could be state legislation introduced next summer that eliminates the shotgun zone completely.  It has bipartisan support.  Wisconsin removed theirs years ago and MN is usually later to follow.  They've tried to pass it more than once and it came up just short both times.  Probably just a matter of time.
    • Wanderer
      Oh, h e l l no! 
    • leech~~
      Screw that, here's whatch need!  😆   Power-Shok Rifled Slug 10 Gauge 766 Grain Grain Weight: 766 Shotshell Length: 3-1/2in / 89mm Muzzle Velocity: 1280
    • Wanderer
      20 ga has become a real popular deer round in the last 5 or so years.  The rifled barrels are zinging those sabot slugs with rifle like accuracy out to 100 yards easily.  Some go so far as dialing in for a 200 yard shot but really, by 150 they’re falling off pretty low.   I have a single shot Ultraslug in 20 ga that shoots really well at 100 yards.  Most everyone I know that has bought a slug gun lately has gotten the Savage 220 in 20ga.  Problem can be finding the shells you want.
    • leech~~
      My son always bugs me about getting a nice light over-under 20ga for grouse hunting.  I say Heck no, I'm getting a 3 1/2" 10ga so I can put as much lead in the air that I can!!     So, I'm keeping my 12ga.  
    • 11-87
      That’s almost exactly what I was thinking.  Have slug barrels for both   One for turkey and one for deer.      I have a 20ga mosseberg as well. (Combo came with the scope but never used.   I always liked the 12 better
    • leech~~
      Wanderer is right on the money and covered it well.  I was wondering too if you had a slug barrel for one of your guns?  If so you could make that your slug gun with a scope, and the other your turkey gun with the Red dot.  As you can afford it. 
    • Wanderer
      Kinda depends on if you want magnification or quick target acquisition.   More magnification options and better accuracy with a scope.  You get what you pay for too so get comfortable with a budget for one.  Tasco and Bushnell work but I find they lose their zero easier, have low contrast and don’t gather light well in low light conditions.  That said, I’m still using one I haven’t replaced yet.  Vortex has been the hot brand for the past several years for bang for the buck.  Good products.  Nothing beats Swarovski though.  Huge dough for those.  Burris is another decent option.   There are some specific models for shotgun/slug hunting in the economy brands and bullet drop compensation (BDC) reticles.  Based on experience I’d recommend not falling for that marketing ploy.   Red dots are usually lower magnification and easier to get on target.  Reasonably accurate but don’t do well with definition, like searching the brush for your target.  I put a HAWKE red dot on a .22 for squirrels and it’s been good.  For turkey, that’s probably the route I’d go.     If your slug shots are normally not too far and too brushy, I’d think a red dot could work there too if you’re only buying 1 scope.  You’ll be better off dimming the reticle to the lowest setting you can easily use to not over shine the target and get a finer aim point.   If you don’t have a slug barrel, you might appreciate one of those.  I had a browning with a smoothbore slug barrel that shot Brenneke 2-3/4 inch well.  The 11-87 would well fitted with a cantelever rifled barrel. 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.