Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

Recommended Posts

side_laker

Looks like my Canada trip in August may not be able to happen due to uncertainty that boarder will open in time. Our group is tossing around the idea of going up

to lake vermilion instead. I am wondering if anyone has advise on where to stay. I have done some looking around and most resorts rent by the week. Any info would be greatly appreciated 

Link to post
Share on other sites
delcecchi
4 hours ago, side_laker said:

Looks like my Canada trip in August may not be able to happen due to uncertainty that boarder will open in time. Our group is tossing around the idea of going up

to lake vermilion instead. I am wondering if anyone has advise on where to stay. I have done some looking around and most resorts rent by the week. Any info would be greatly appreciated 

West end is beautiful and is getting better from what I hear, but if you are a walleye guy east is still the place.   Muskies, bass, pannies, nords, west is fine.   

Link to post
Share on other sites
BirchPtMike

Almost all resorts are very booked for this reason. Better make a move if you want anything here, Houseboats might be an available option

Link to post
Share on other sites

Just be sure that the private rental has a permit from the county, it would suck if you got kicked out because the owner didn't follow the new county rules.

Link to post
Share on other sites
CLOTAGAMES

Life of Riley resort. On west end. Great place.Been going there for 52 years. 218-666-5453

Link to post
Share on other sites
delcecchi
5 hours ago, CLOTAGAMES said:

Life of Riley resort. On west end. Great place.Been going there for 52 years. 218-666-5453

52 years?  Holy carp.  I thought my string starting in 1974 was a long time.   

Link to post
Share on other sites
bassbouncer

Joe Amundson at spring bay has a few openings left 2187806100

  • Thumbs Up 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

    • the stick
      By the stick
      Looking for a Septic System installer. Lake Vermilion Area. Thanks for your help.
    • SkunkedAgain
      By SkunkedAgain
      My 1960 Johnson Seahorse is on the fritz. I did an overhaul the over the winter rebuilding the carb, replacing dry fuel hoses, fixing two stripped bolts (helicoils) on the powerhead, etc... This spring she only wants to run on one cylinder. I am assuming that it's the coil or something similar but suck at the electrical side. 
       
      Great American Marine in Bloomington won't touch old motors anymore. Neither will Boat Motor Recyclers in Burnsville (1990 and up!). 
       
      Does anyone up near Vermilion still work on older motors? I'll take a recommendation for somewhere near the lake or in the Twin Cities. Any input is appreciated.
    • Getanet
      By Getanet
      My dad is looking to get rid of his ice castle and I will probably buy it.  It's only a 4-hole and the lights and furnace just connect to a car battery kept inside the house.  I'm wondering if anyone knows if it would be a lot of work to get it wired up so I could run everything off my generator?  I'd like to have one standard electrical plug-in inside to charge cell phones or run a TV or whatever.  I'm assuming this wouldn't be major task for a professional, but maybe I'm underestimating how much work is involved? (I know I could always run an extension cord out the window or under the door, but I'd rather not).
    • hitthebricks
      By hitthebricks
      What causes this to happen?
    • Tanneuby
      By Tanneuby
      Does anyone know it there is a local service for on-off?  Looking to have someone put my house put on Tonka and then remove at end of the season and transport to my storage facility. 
    • 406_outdoormaniac
      By 406_outdoormaniac
      So I just received my fathers ice shack he built more than 20 years ago. He never got to take it out because of life so it’s been sitting there since rotting away. I’m doing some TLC on it and want to get some wiring done before the inside is done. I’ll have a propane wall heater, that’s easy to do for me. But I don’t know much on how to configure a 12V system. I just want to add a couple lights inside and 3 or 4 outlets, possibly lights outside as well. Nothing crazy but I want to be able to build off of it in the later future. Please give me some criticism or whatever you please. Just want to do it right and safely. Shack is 6’ X 10’. 
    • papadarv
      By papadarv
      Check and Double Check ice thickness BEFORE putting your Wheeler and ice House/Portable out. Dec 17 two wheelers went threw 1 1/2 to 2 inches on Ottertail. Area around where units went threw had 7" to 9" ice. A spud bar check would have saved them many $$$ recovery cost. Thanks to Tri-State Diving for recovery.
       https://www.facebook.com/145016345514080/posts/4153802971302044/
    • Old Boat
      By Old Boat
      It's got a 50hp Merc that's got the lower took apart. Covered bow, tapered STEARN. Thick aircraft grade aluminum.
    • papadarv
      By papadarv
      Rembering and a Salute to the many who keep us Safe and gave us our Freedom. A few photos from a long time ago in 'Nam

       
    • Muskysteve
      By Muskysteve
      Hi All,
       
      I have just purchased a cabin in Frazer bay. We are in need of a recommended cabin inspector. Would anyone be able to provide a recommended contact?
  • Your Responses - Share & Have Fun :)

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.