Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Connect, BE BRAVE - We Share Fishing Reports & Outdoor Information Here


      Fishing Report Clubs - Make Your Own "Post Your Thoughts" - Leave YOUR mark, make each place you visit "a little better"!

      Join the Minnesota Fishing Report Club, where only club members see detailed info that is shared. CLICK HERE to join.

      Have Fun!!!

MNAngler01

Mille Lacs

Recommended Posts

MNAngler01

Has anyone found some perch or burbot around Garrison on Mille Lacs? I might be out there this weekend and I was wondering if mudflats would be good for perch?

  • I Like it 1

Share this post


Link to post
Share on other sites
Rick

They roam the tops of the flats picking out mayfly larvae and worms.

 

Just remember the tops of those flats are very soft. So stay up a wee bit. It can be a tough bite...but they are there. 

 

Check out the Cass Lake forum for perch.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Similar Content

    • Hookmaster
      By Hookmaster
      The other boats I've owned had the bow roller positioned so the roller hits the keel when the boat is snubbed up, not the bow eye.




    • SkunkedAgain
      By SkunkedAgain
      I'm located in the Cities, but if anyone on the Vermilion forum (or around the metro) has one of those swim platforms that isn't being used, I am in the market.
    • Hookmaster
      By Hookmaster
      New 2020 1875 Pro Guide. Helix 12 Mega SI graph. Can't read bottom when up on plane. I was going to adjust the transducer and this is what I found. Isn't the first rule in transducer placement to put it where there is "clean", undisturbed water flow?? It is below the bottom of the boat, maybe too far. It's a side imaging transducer so I feel the riggers wanted it close to the center of the boat. Where have others placed a side imaging transducer and have it read bottom when up on plane? I don't think you can move it closer to the center line. If you move it to the left of it's current position, the is the power strake in the front 1/3 of the boat. Any help is appreciated!!


    • Hookmaster
      By Hookmaster
      New 2020 boat. Livewell is leaking into the boat. Upon further review I found the leak. It's on the white fitting of the recirculation system where the water goes back into the livewell. I'm sure the rigger broke the little nipple on the right side when he installed the fuel/water separating filter as the gray gas line is right there. My question is where does the tubing from the little nipple go? The front livewell?
       

    • Vlewis128
      By Vlewis128
      Hi all. I am currently at Rush Lake near Perham at Four Seaons Resort. We’ve been here three days and have caught basically nothing. Can anyone give me some advice on walleyes here? Where to go and good baits for this lake? I’ll take any advice on any type of fish you might experience with on this lake. Never been here before.....
    • Hookmaster
      By Hookmaster
      Has anybody used these Felpro washers? My kid's Corollas oem washer is coated aluminum. This Felpro is a synthetic material. I mistakenly ordered it from Rock Auto. Not a big loss if I chuck them and get the oem ones. OEM on the left. Felpro on the right.

    • Beinglis23
      By Beinglis23
      which Bait is best for rainbow and brown trout
    • yoppdk
      By yoppdk
      I have TWO new Adirondack Chair and Table sets available for immediate sale. Both sets include two chairs and a ceramic-top table. One set also includes a pair of matching footrests.
      These sets are constructed of weather-resistant Canadian cedar which will last many years. The chair frames and armrests use 2 x 6 and 2 x 8 lumber making them the sturdiest Adirondack chairs available. They are also coated with a minimum of two coats of premium deck/furniture stain and assembled using only rust-proof coated deck screws.

      The chairs are designed to accommodate most individuals from petite to XXXL and have a contoured seat and back so you can comfortably sit in these for hours. All edges and sitting surfaces are rounded and sanded smooth for added comfort.
      These are available for immediate pick-up in the Grand Rapids area ... or I can deliver within a 15 mile radius at no charge. Delivery beyond 15 miles of Grand Rapids is also available for a nominal charge.

      Full Set - $800:
      - 2 Adirondack Chairs
      - 2 Matching Footrests
      - 1 Matching Ceramic-topped Side Table

      Chair/Table Set - $600
      - 2 Adirondack Chairs
      - 1 Matching Ceramic-topped Side Table

      These are available as sets only. However I can build separate pieces to your order.
       
      Please PM me for questions or with orders. First come, first served. New orders typically take 3 or 4 weeks.




    • burgoyne
      By burgoyne
      Hey all, I’m new to the state (moved here from Ontario) and am in the Eagan area. I was sad to find that my boat is a little large for most lakes within a short drive (20-30 minutes), so I bought a kayak. The boat will get saved for trips up north. 
       
      Anyways, I was hoping to get some info on lakes/ rivers to try around Eagan. I don’t need specific spots, just lakes that hold fish. Was hoping for walleye/ crappie/ pike. 
       
      Any tips would be appreciated! 
    • mrpike1973
      By mrpike1973
      Just wondering which one seems the best so far the Shadow rap seems more versatile The husky jerks to me seem a little hard to get to track straight. Thoughts? 
  • Your Responses - Share & Have Fun :)

    • JBMasterAngler
      Well, the highway 70 access won me over yesterday, only to break my heart today. I should have seen the warning signs at the start of the day. Get to the launch, get everything ready, about to put boat in the water...forgot the life jackets! 😫 I drove to the Walmart in Pine City and bought 2 life jackets! Finally got on the water. Was a nice boat ride upstream. Was hoping maybe to make it all the way up to the mouth of the Snake River. Probably made it halfway before it got too shallow. I most likely could have made it through had I had more ambition, but we needed to start fishing. Hooked into a few fish right away, but lost them. I’m pretty sure one was a small muskie. Ended up drifting all the way back to boat launch, and only caught 2 fish! And both were just a couple hundred yards up from the launch! Was a smallie and a little walleye. So yes, slow day indeed. Looks like a nice trail system at the access though. Might have to plan a hike there this summer.  
    • chopper72
      I am going up to camp in the middle of June.  Anybody have any suggestions about baits and depths etc. for Walleyes and Bass?
    • Muskies
      May 31...Another beautiful afternoon on rainy lake with my wife...fishing east end this time...out for 4 hours 20+ walleyes and one 30” northern. Surface water temperature 65 degrees in 10-14 feet...jigs and chubs...Cajun batter on the fillets...
    • Wanderer
      Looks too low to me too.
    • Squirt
      Going to lake vermillion for the first time. June 13. Staying near Arrow Head Point, Isle of Pines. Only have a small boat with 15 HP so looking for some tips for where to go for big pike that is reasonably close given my boat. I do not mind a drive, but I know how conditions can get on big water.  I also plan to go to Trout Lake (reason for bringing the small boat) If anyone has tips on Trout Lake for Pike.  Thanks and #tightlines!
    • rayguy
      Heading up to chain for a couple weeks.  Need some general info on the panfish bite.  They still shallow?  Got a couple grandkids coming up and any info sent on the panfish action will be appreciated.  Thanks   Ray guy
    • walros
      Maybe see if you slide the winch back on the tongue an inch or two. The roller needs to contact the boat to keep it from bouncing. Should check to make sure the rear bunk rollers line up with the rear transom for stability.  
    • gunner55
      Every rig we've owned the roller is above the eye & snug to the boat when it's loaded.
    • h8go4s
      https://www.dnr.state.mn.us/fishing_piers/index.html
    • Cheers
      I looked at my rig yesterday . It is a matched boat/trailer package from Lund . My roller is above the eye but snug onto the bow , probably an inch maybe more, higher than yours.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.