• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Join In - We Share Fishing Reports & Outdoor Information Here

     
      You know what we all love...

      The same things you do!!!! Share what you love & enjoy in the outdoors as well as thank those whose posts you 'appreciate.'

      Have Fun!!!

  • 0
Joshua

Replacement pedal for minn kota power max all terrain help

Question

Joshua

Hello,  I have an older model minn kota trolling motor.  Its a 1999 All Terrain Power Max 44lb Thrust.    I cannot seem to find a new foot pedal system for it.

Should I just get a new trolling motor?

Thanks in advance for any help

Share this post


Link to post
Share on other sites

7 answers to this question

Recommended Posts

  • 0
Wanderer

If Minn Kota doesn’t supply them any longer, you should search the typical on line sales sites in case someone is advertising new old stock parts.

I have a 55lb Maxxum on my fishing boat that needs a new armature.  MK doesn’t sell them anymore either.  I did find some new lower units available and some armatures.  I don’t have the serial number sticker on my TM anymore to know for sure what armature to get so I took mine to an electric motor shop to be rewound.  The cost is about the same as a new lower unit though.

I might just as well get the lower unit with new seals and such but it is really a wash on price and everything else is in good shape.

Check more resources if you haven’t already is my advice.  Good luck.

Share this post


Link to post
Share on other sites
  • 0
rumeye

Try these guy's they helped me out one time   https://www.warnersdock.com/ They are in New Richmond WI.

Share this post


Link to post
Share on other sites
  • 0
BobT

Alexandria Appliance in Alexandria, MN is a Minn Kota parts outlet. Yeah, I was caught off guard about that too. Could check them out. 

Address: 222 6th Ave E, Alexandria, MN 56308

Phone: (320) 763-6583

Share this post


Link to post
Share on other sites
  • 0
BobT
Posted (edited)

Have you tried cleaning it? I have found more often than not when someone tells me their foot pedal isn't working right, I can take it apart, clean it up, lubricate it, and everything works again. If you try this, avoid grease or oil because dirt collects. I used WD-40 and it seemed to work well.

Edited by BobT

Share this post


Link to post
Share on other sites
  • 0
papadarv

I have a simular vintage Minkota, got tired of cleaning/repairing the foot control so went to a Co-pilot. Found it to have much better boat control trolling breaks for Walleye. 

20180718_071731.thumb.jpg.bb0ed371b5ad7870bca2fa0a45feea69.jpg

 

20180718_072312.thumb.png.71ff4cf391365037f55cdcf709f7731d.pngï

Screenshot_20180403-082209.png

Share this post


Link to post
Share on other sites
  • 0
BobT

When I was using my Minn Kota PowerDrive I was hesitant to switch to Co-Pilot. But, after I switched, I never went back to the foot pedal. 

  • Like 1

Share this post


Link to post
Share on other sites
  • 0
Hoey

I have a CoPilot-PowerDrive system available, cover, board, and remote.  I am located in the N/NW metro area.  It came off a 36v system and I do not know if that makes a difference or not.  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Your Responses - Share & Have Fun :)

    • Barbelboy
      Gimruis, i'm on your team. My last boated musky was 2005. One would believe it not possible. Now, to double down on Ace's statement, I don't target them frequently, and to be honest I really never was all that particular to fishing for them. But part of it is just bad luck. I probably averaged 8-10 1/2 days musky fishing every summer on lake vermilion for 20 years and I've netted 6-7 for boat mates and lost 4. But while my folk had a place on lake vermilion for 20 years. My blasted twin brother would try out a new buck tail off the dock and catch a 47" fish.  It's kind of a running joke in my family now about how I can't catch one. You'd think i'd eventually put the pieces together and get one in the boat!
    • gimruis
      I stopped keeping track at over 300 hours specifically targeting them.  I'm sure the number was probably closer to double that.  Its a true story.
    • Hoey
      Steve - Nice report.  I will be fishing this weekend with high school classmates, our annual trip, then staying around all week toward Labor Day and heading home on Sunday to avoid the heaviest traffic.  I will be bringing my tree equipment and spending a day helping a local retiree with some trimming.  
    • meisterluv
      Hi guys,   I'm driving up to fish the Alexandria area and would like pointers on which lakes would be best for quality fish.  I've read about darling and carlos but feel those might be to heavy pressured and possible to big of a lake for me.  Any help is greatly appreciated. Thanks!
    • DRAGFOOT
      Summer slipping away means Fall fishing though!
    • BobT
      Did you find most of those in the afternoon? We didn't do so well. Tried for eyes on various midlake humps for about an hour and then changed tactics to panfish for about 45 minutes before we had to leave. Found one decent size northern pike but that was it for us.    Enjoyed having the opportunity to meet you, Borch. Too bad we weren't able to spend more time. Maybe next time.🙂
    • Chill62
      The tournament the girlfriend has been fishing ended Saturday night so we were able to take off early Friday and make it out for an evening bite and again Saturday morning.
      Friday night fishing was good but a lot of 6-7" gills but we did land a few 9.75" and 9.5" gills.  Really tough bite had to cover LOTS of water to find them.   Saturday morning the crappies moved in and were really aggressive but they were 6-8" with only a handful over 10". We landed a few more 9.5" but we had to cover miles of shoreline jigging trying to find them.  Boats next to us weren't even catching a blue gill it was a tough bite.  Very negative bite.   We left the water Saturday and was instantly approached by the game warden.  I was working on my trailer prior to loading the boat and he was asking the typical questions about fishing because he's seen my trailer very often at the access.  He was pleasantly surprised that we didn't keep a fish.  He said everyone has been keeping limit after limit and he's seeing the size drop from almost 9" average down to a group that morning had kept 7" for 4 limits.  Told him we kept 8 fish last Saturday for some meals and that was it in the 3 weeks we've been fishing up there, needless to say I think he was shocked and proud that people weren't just taking limit after limit home.   Tournament ended Saturday night at midnight for the girlfriend.  The app keeps track of everyone's best 10 fish and her length at the end of the tournament was 95.5" which puts her in first place. Second place is at 91.5" and third place 91.25" so unless something major happens and they don't like our pictures she should have the win!  It was interesting in the beginning to be excited for 8" gills then after we got 10 of them they jumped to 8.5" then to 9.0" then 9.25" then pushing for 9.5".  Was a lot of fun.  I believe she has 2-9.25" and 4-9.5" with remaining being 9.75".  The final 10 fish were all caught in Becker County on one lake and were let go to swim again.  I stress a lot catch and release and keeping only what you want or NEED for a meal but during this tournament we caught the same fish 4 times.  He is blind in his right eye, big beautiful blue gill and I caught him week ago Saturday and again Sunday and the girlfriend repeated me on Saturday and Sunday this weekend.  Each time he measure 9.25" so we either caught the same fish 4 times or we caught 4 different gills all the same length in the same area of the lake.   All fish were also caught on Panfish Pirate 5 mm lead jig in Lipstick color with either Push Up or Bubble Gum soft plastic Kraken.  We are waiting for an official announcement from the organizers that these scores are official and I'll report back at that time!
    • ANYFISH2
      Nice work Borch! Or maybe I should say Mrs. Borch?   Looks like I missed out.
    • papadarv
      Keys to make the blade work well. *Sharp! *Cutting edge needs to line up to the Gullet of the opposite blade! *Add a .020 shim 1/8" wide between blade screw and cutting edge. Increases cut angle to same as K-Drill! I'm working on another set welding  1/4" piece of blade to the outside blade edge extending the blade 1/2" past auger flight making it a full 8" hole. Note how the K-drill blade extends 1/2" past the auger flights.  
    • leech~~
      I like your blade work as well. Two summers ago when I sold my hand auger at my garage I think I throw out about 4 sets of those old blades as well!  😣