Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

Spring Bobbers.


eyeguy 54

Recommended Posts

I had the tip break off my st. Croix last year. so I took the spring bobber bracket and put it on a Guide Series extreme rod. I like it better then the st. Croix. 

Link to comment
Share on other sites

Anyone every use the DH Custom Pannie Drop'r Hybrid Noodle? It is the Al Dente blank but the first two inches are replaced with a built in NiTiCo wire? I recently broke my go to spring bobber rod and Want to replace it with this.

Link to comment
Share on other sites

On December 25, 2016 at 9:58 PM, Vitreus said:

I've been eyeing the tripwire. It has a Ti spring bobber built into the tip. Just can't bring myself to spend that much money for an ice rod..

 

Yes, unfortunately. You can buy different springs, but you have to either buy their proprietary rod or rig something up like above to use them.

I brought my rod in there bought their spring bobber they have different ones to choose! They installed on my rod looks factory!! Wasn't very expensive about $15 complete!!

  • Thumbs Up 3
Link to comment
Share on other sites

  • 'we have more fun' FishingMN Creators

I had two rods done and had one break off after a half dozen trips on the ice.  I know rhey $do fix it for me but just never seem to get back down there often.

  • Thumbs Up 1
Link to comment
Share on other sites

I will not go on the ice without my St. Croix Legend  spring bobber rod. aka St Croix Silver now. i have two of the three different springs for different jigs or small spoons. Great rod. i am comparing it this year to a new Tuneup custom bullwhip i just got.

Link to comment
Share on other sites

How about the Beaver Dam line of titanium tip rods? Anyone have any experience with these? Looks like a good flasher rod. 

  • Thumbs Up 1
Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders

dang, I like the looks off that 23 incher.  

Beaver Dam Titanium Tip Stick

might have to check one out sometime. 

  • Thumbs Up 1
Link to comment
Share on other sites

  • 2 weeks later...
  • 'we have more fun' FishingMN Builders

How is everyone liking there set ups?

Link to comment
Share on other sites

On ‎1‎/‎7‎/‎2017 at 7:06 PM, Jim Uran said:

How about the Beaver Dam line of titanium tip rods? Anyone have any experience with these? Looks like a good flasher rod. 

I have one and I can catch fish with it but I don't like it

The pull out spring bobber sounds like a good idea but it almost makes it feel cheap and like its loose I can kind of feel its not solidly connected at the tip if you understand what I mean. and I feel that the spring is too long it droops way down with small tungsten jigs. For the money I would go with the Dave Genz Spring Bobber Ice Combo

 

I do have two beaver dam glass noodle rods and they are awesome and the reels they come with are pretty nice as well.

 

  • Thumbs Up 1
Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders

still love my setup for bluegills but not the best when I use a size 10 jig and fishin for crappies. I might grab the clam springs and rig a rod up with the wire thats a little stiffer and see how it works. this would just be for deep fish. 

Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders

My dad figured out how nice a st croix legend is last weekend. Has asked a couple times where he can get one with a reel like what I had.

Link to comment
Share on other sites

I am not sure how I like the St Croix spring bobbers 

I have been fishing with a St Croix lately and for the jig I am using I don't need the spring pulled out all the way and been having issues with the line getting into the spring that is sticking out on the one side. I Fixed it by cutting the spring so now it is flush with the rubber that holds it. But every once in a while I will get the line stuck in the other side now.

 

Don't ask me what I am doing but usually it happens when I set the rod down to take off a fish or something.

When your line gets in there good luck getting it out it is a pain in the you know what.

 

I was hoping that the rod would satisfy me but it just does not but I picked it up from a guy at work for 25 bucks so I guess that is hard to beat.

 

I will be ordering one or two Pannie drop'r from DH customs as I like those style spring bobbers the best

 

 

z.png

Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders

Your line is coiled or twisted 

Link to comment
Share on other sites

I own a dozen Beaver Dam rods.  They are better then anything I have ever found.  The spring bobber  retracts into the blank for protection so that spring does not break off in transport.  I have used these rods from everything from perch and bluegills to lake trout and Winnipeg greenbacks.  They definitely can handle anything.  

  • Thumbs Up 1
Link to comment
Share on other sites

14 hours ago, monstermoose78 said:

Your line is coiled or twisted 

No I out brand new line when I put the reel on it I just happen to have slack out enough and not pay attend in and it gets in the spring I guess just not for me  

Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders

Crazy never had it happen 

Link to comment
Share on other sites

ZachD, I have had that happen to me a couple of times as well. It's frustrating for sure. I end up having to cut my line and remove the "scrap line" from the spring and retie my jig. That being said, I do like my St. Croix Silver spring bobber rod. I do use it almost all the time for panfish, but I am starting to look at some of the "noodle rods" that have a very light/sensitive tip and decent backbone. That way there is no spring bobber needed. 

Link to comment
Share on other sites

The Throne bros Tripwire Spring bobber is made by Thorne.  It is a titanium wire with a REC guide tied on the end. Obviously, being titanium, they are indestructible.  They have 3 "sensitivities" of TW's. One the works well with 4mm jigs and under (Yellow), one the works with 4mm and up (red/pink) and one for Perch or small spoons (can't recall the color).

 

I have built 3 rods with the TW's.  The nicest thing about the TW is that when matched with the right weight jig (not overpowered) they act just like an extension of your rod, you don't lose much action on your jig yet still have that ultra sensitive indicator of a bite.  

 

I would post a picture of mine but I am quite honestly the worst cosmetic guide tier on earth.......I build them for purpose not beauty.... :)

 

I think they charge about $12 per spring.  Not sure what they charge to put them on.  But trust me, it is worth it.

Link to comment
Share on other sites

what about how the line placed on the reel??  years ago that was big thing.  just wondering and I think it still can help, possibly.  

Link to comment
Share on other sites

That would definitely cause a problem with the line being very twisted and tangling in the spring, but I've encountered the problem with new line out of a straight line reel too. It happens, and I agree it sucks, but retie and get back to catching fish.

Link to comment
Share on other sites

10 hours ago, fisherjmb said:

ZachD, I have had that happen to me a couple of times as well. It's frustrating for sure. I end up having to cut my line and remove the "scrap line" from the spring and retie my jig. That being said, I do like my St. Croix Silver spring bobber rod. I do use it almost all the time for panfish, but I am starting to look at some of the "noodle rods" that have a very light/sensitive tip and decent backbone. That way there is no spring bobber needed. 

I knew I wasn't alone it is frustrating as heck especially when the fish are biting like crazy that's usually when it happens to me.

 

Link to comment
Share on other sites

16 hours ago, ZachD said:

I knew I wasn't alone it is frustrating as heck especially when the fish are biting like crazy that's usually when it happens to me.

 

Yes,it does seem to happen when the fish are biting, doesn't it?

  • Thumbs Up 1
Link to comment
Share on other sites

  • 'we have more fun' FishingMN Builders

I used to use these and would wind the line in them once in awhile. grrrrr!  LOL  

500-0.jpg

  • Thumbs Up 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • mulefarm
      With the early ice out, how is the curlyleaf pondweed doing?
    • LakeofthewoodsMN
      On the south end...   The big basin, otherwise known as Big Traverse Bay, is ice free.  Zippel Bay and Four Mile Bay are ice free as well.  Everything is shaping up nicely for the MN Fishing Opener on May 11th. With the walleye / sauger season currently closed, most anglers are targeting sturgeon and pike.  Some sturgeon anglers are fishing at the mouth of the Rainy River, but most sturgeon are targeted in Four Mile Bay or the Rainy River.  Hence, pike are the targeted species on the south shore and various bays currently.   Pike fishing this time of year is a unique opportunity, as LOW is border water with Canada, the pike season is open year round. The limit is 3 pike per day with one being able to be more than 40 inches. All fish 30 - 40 inches must be released. Back bays hold pike as they go through the various stages of the spawn.  Deadbait under a bobber, spinners, spoons and shallow diving crankbaits are all viable options.   Four Mile Bay, Bostic Bay and Zippel Bay are all small water and boats of various sizes work well. On the Rainy River...  Great news this week as we learned sturgeon will not be placed on the endangered species list by the U.S. Fish and Wildlife Service.     The organization had to make a decision by June 30 and listing sturgeon could have ended sturgeon fishing.  Thankfully, after looking at the many success stories across the nation, including LOW and the Rainy River, sturgeon fishing and successful sturgeon management continues.   A good week sturgeon fishing on the Rainy River.  Speaking to some sturgeon aficionados, fishing will actually get even better as water temps rise.     Four Mile Bay at the mouth of the Rainy River near the Wheeler's Point Boat Ramp is still producing good numbers of fish, as are various holes along the 42 miles of navigable Rainy River from the mouth to Birchdale.   The sturgeon season continues through May 15th and resumes again July 1st.   Oct 1 - April 23, Catch and Release April 24 - May 7, Harvest Season May 8 - May 15, Catch and Release May 16 - June 30, Sturgeon Fishing Closed July 1 - Sep 30, Harvest Season If you fish during the sturgeon harvest season and you want to keep a sturgeon, you must purchase a sturgeon tag for $5 prior to fishing.    One sturgeon per calendar year (45 - 50" inclusive, or over 75"). Most sturgeon anglers are either a glob of crawlers or a combo of crawlers and frozen emerald shiners on a sturgeon rig, which is an 18" leader with a 4/0 circle hook combined with a no roll sinker.  Local bait shops have all of the gear and bait. Up at the NW Angle...  A few spots with rotten ice, but as a rule, most of the Angle is showing off open water.  In these parts, most are looking ahead to the MN Fishing Opener.  Based on late ice fishing success, it should be a good one.  
    • leech~~
      Nice fish. I moved to the Sartell area last summer and just thought it was windy like this everyday up here? 🤭
    • Rick G
      Crazy windy again today.... This is has been the norm this spring. Between the wind and the cold fronts, fishing has been more challenging for me than most years.  Panfish have been moving in and out of the shallows quite a bit. One day they are up in the slop, the next they are out relating to cabbage or the newly sprouting lilly pads.  Today eye guy and I found them in 4-5 ft of water, hanging close to any tree branches that happened to be laying in the water.  Bigger fish were liking a 1/32 head and a Bobby Garland baby shad.   Highlight of the day way this healthy 15incher
    • monstermoose78
    • monstermoose78
      As I typed that here came a hen.  IMG_7032.mov   IMG_7032.mov
    • monstermoose78
      So far this morning nothing but non turkeys. 
    • monstermoose78
      Well yesterday I got a little excited and let a turkey get to close and I hit the blind!!
    • smurfy
      good......you?? living the dream..in my basement playing internet thug right now!!!!!! 🤣 working on getting the boat ready.......bought a new cheatmaster locator for the boat so working on that.   waiting for warmer weather to start my garden!!!
    • monstermoose78
      How is everyone doing? Holy moly it’s chilly this morning I stayed in bed and will hunt later today when it warms up.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.