• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Join In - We Share Fishing Reports & Outdoor Information Here

     
      You know what we all love...

      The same things you do!!!! Share what you love & enjoy in the outdoors as well as thank those whose posts you 'appreciate.'

      Have Fun!!!

Recommended Posts

HNTNBUX

I have had a cabin in Emily for about four years now and I have fished several area lakes with very spotty success for walleyes.  Would anyone be willing to share, PM if you choose, if Thunder is worth trying and the type of structure that the fish relate to.  Most of the walleye I catch in the area are incidental to crappie or bass fishing in the weeds.  Do the fish relate to the weeds or are they on the more traditional structure?  Is there a preferred bait or presentation?  Thank you.

Share this post


Link to post
Share on other sites
RustySasquatch

I have only fished that lake once and it was mid-day in July.  Lots of good action for largemouth and smallmouth bass.  We did not have a ton of luck looking for walleye as dusk approached.  It was like a wind tunnel with the wind coming out of the north.  It is very scenic with the high hills surrounding the lake.  Sorry I can't be of much help, but that is my 2 cents.

Share this post


Link to post
Share on other sites
HNTNBUX

Thanks for answering the post.  I like catching bass, especially SM if I can find them, so it sounds like a lake to try during the day and see what happens from there. 

Share this post


Link to post
Share on other sites
TNFL

I’m heading up there this weekend.  I’ll be fishing for Bass specifically.

the maps look like there is a ton of fishable structure.  I’m hoping to find the weed line and work a few areas.

Share this post


Link to post
Share on other sites
ozzie

I have a buddy that has a cabin on the lake and he will fish the walleyes over deep water and also in the weeds as they seem to relate to both at times.  Seems like a hard lake to pattern but he always seems to catch something out there.  Good Luck

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Your Responses - Share & Have Fun :)

    • yoppdk
      I'm pretty sure there is a setting on your Hummer that lets you set where (voltage level) you want to get the "low battery" warning or dropout. At least mine does ... and I temporarily reset it once to keep it from dropping out each time I started the outboard. Of course I wouldn't advise that for a long-term fix as you might go to start the engine one time and get nothing but clicks. Is it possible that setting got changed at one time and maybe it's set too high?
    • chaffmj
      Well I got skunked on my first ever attempt to fish muskies. It was still a lot of fun and I will try it again!
    • Rick
      DNR urges people to use caution when operating farm equipment Exceptionally dry conditions in the northwest part of the state have contributed to several small fires over the past week. To prevent a possible wildfire, the Department of Natural Resources urges extreme caution when using farm equipment right now.  To reduce the chances of starting a wildfire when working in the field, follow these steps: Make sure machinery is well maintained and working properly to prevent overheating and the formation of sparks. When cutting or mowing, be aware of rocks that may cause sparks if struck by mower blades. Check that all fire extinguishers are appropriate for the size of the machinery, are fully charged, and are easily accessible. Carry an ABC rated fire extinguisher – it can be used for electrical and petroleum-based fires originating on the tractor and for vegetative fires. Check and remove combustible vegetation from motors, exhausts, ledges and brackets several times a day. Remove debris from the surface of the baler using a portable gas-powered leaf blower. Keep hay in groups of 10 bales or fewer and at least 100 feet away from structures or other ignition sources. Firebreaks – 30 feet of mowed grass, bare ground, or rock between bale groups – will help prevent fire from extending to additional bales. Frequently check to see if stored hay is hot or has internal fire (noted by a caramel or strong burning odor, visible vapor or smoke, strong musty smell, or all of the above). Do not move overheated or smoldering hay. Immediately call 911 if fire occurs and provide clear directions to your location. Check the weather – avoid running equipment on days with warm temperatures, high winds, and low humidity. Plan your day – take advantage of mornings and evenings that tend to have calmer winds, cooler temperatures, and higher humidity. Find more information about fire danger at mndnr.gov/burnrestrictions. ### Discuss below - to view set the hook here.
    • mrpike1973
      From what I'm hearing I believe I will just keep my K-Drill. I have no doubts whatsoever that Nils is a great product and Frank does awesome work on the blades. Many of my friends have used his services before. I drill a lot and almost always on dirty wind swept ice last year was terrible on the lakes I was on. 2 sets of blades for me last year first set got dull around January then replaced to the second set at the end of the year. I did call K Drill today they said that's normal for the usage I do. No cause for alarm at all. So I'm always looking for the grass is greener on the other side type person. No hurt feelings here fellas both are good augers and I will not say bad things about them just thought I was missing the boat but as someone said does it really matter if you get the hole drilled 2 seconds faster? It matters how many fish you pull up that hole😁
    • BobT
      Here's a thought that just occurred to me. I was having some similar issues with my sonar unit. While troubleshooting noise feedback from my trolling motor, one thing I tried was to add a ferrite core filter on the power cable to my HB 596c. Now that I think about it, I have not had a problem with my HB shutting down on starting my outboard since I added the filter. It's possible the ferrite core is attenuating the voltage fluctuation just enough.    Got the clamp-on filter online for less than $5.00. Something like this one from ebay. You need to get the right size to fit your HBs power cable. Mine was 1/4".   Inexpensive thing to try.
    • leech~~
      So there is Trout in there as well?  Where is this Holy Buckets Lake?  😯
    • BobT
      Now, I'm puzzled. Both units should therefore be experiencing the same brownout conditions when you start your outboard. I wonder if a surge suppressor might be helpful? Is the bow mount unit a newer unit and if so, maybe it has updated technology that is less susceptible to the voltage drop. I'm just thinking out loud now. 
    • Rick G
      Wow, nice gill😁
    • Fish Head
      Yes they are. 
    • Rick G
      Mr Pike, if you are going through blades that fast on the k-drill, you will certainly dull them out just as fast or faster on a Nils. The Ripper style blades that come on the K are about as good as it gets as far as durability goes.