quiet furnace!!!!!!

[WalleyeBIZ]

Am looking to put a furnace in the wheelhouse i'm making, just curiouse what everyone thinks about the suburban 30,000 btu! Or other brands, I dont know too much about them! Any info or preference to steer me in the rite direction will help!!Thanks

[Walleye Inn]

make sure the furnace has a thermostat will be very nice especially at night good luck

[gunner55]

Someone else can chime in here but I think that is the make/model that a lot people went to when they had furnace trouble with their new IC's the year before last.

[WalleyeBIZ]

Do u think a 20,000 suburban will work in a 16 x 6 sprayfoamed? the current draw is ony like 2 or 3 in the 20,000, and 5.5 in the 30,000?

[brian6715]

Yes that would be fine. I have a 20k in an 8 x 16 that is not sprayfoamed, and it can keep up. The biggest thing is banking it good and using hole sleeves to keep the wind/draft out.

[rl_sd]

Just built a 6.5 x 14 plus 3' V and put in a suburban 19k btu unit (NT20-SEQ). The unit is a direct discharge and much quieter than the non "Q" models. I was worried about the air volume output, but seems to move just as much air as my friends non-quiet model. Just finished it this spring so haven't had the chance to rune it through the paces but been happy with the quietness during test firing. 

[Gus]

20K btu will be just fine for your size house.

I've got a 20K in a 8x20 salem ice cabin toy hauler and I do fine.

I do wish I had the 30K just for the warmup time it takes the 20, but looking at it as a glass half full guy, it gives me time to sweep up the ice shavings from drilling holes before they melt into water.