Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • 0

Transporting otter xt650 lodge. Need ideas.


Question

Posted

How do you guys transport your otter xt650 lodge with your SUV?

Recommended Posts

  • 0
Posted

Look into a cargo hitch/carrier...

  • 0
Posted

I haul mine on the trailer behind the quad...

  • 0
Posted

Look into a cargo hitch/carrier...

That is how I haul my Otter Lodge. I also have to add lights to the back because the Lodge blocks my taillights. Stack the wife's Otter Cabin on top of the Lodge. Works Great!!

  • 0
Posted

I do have a hitch carrier that I use for my smaller Eskimo sleds. It's fits perfect, but I'm afraid the otter sled will not sit too well on the hitch carrier. I wonder if someone sells an oversized hitch carrier?

  • 0
Posted

Jim. You have a 4runner right?

  • 0
  • 'we have more fun' FishingMN Builders
Posted

I carry my Clam Voyager when not on the snowmobile trailer with the sled on one of the cheap little red trailers you can get at Northen. I found a brand new one on the list for $150 and you can't even feel that it is behind the SUV when going down the road. Good luck Lee. wink

  • 0
Posted

Leech. I also have a utility trailer. But it's a hassle to tow it to places. I'm trying to keep it simple and practical.

  • 0
Posted

Jim do you know what the dimensions or model of your carrier are? I would like to be able to transport my lodge on a hitch carrier as well, but it seems like most would be too small.

  • 0
Posted

I have the steel model the Northern sells. The Lodge fits over the entire area with no problem. Right now I am making a wood rack to fit over the rack so I can attach lights to the wood and keep it off the steel carrier. The reason is I keep braking the taillights. This way the Lodge will sit on top of 2 X 4s and the cross member board will fit inside the rack. The load capacity for my model is 500 pounds. I also have a bike rack extension so I can make the carrier about 8" higher off the ground. I found that some accesses are a little too steep. I will take a few shots and post what the setup looks like once it warms a bit crazy

Yes I do have a 4Runner.

I will also take down the dimensions.

  • 0
Posted

It was tight but I could squeeze my lodge into my 4runner.

  • 0
Posted

My carrier is 60' X 21" to the outside edges. Another advantage of the bike rack extension it will let you get into the back of the truck. There will be about a foot gap. I have to shut the door before I load the Lodge as well.

  • 0
Posted

Pictures would be awesome! Thanks.

  • 0
Posted

Thanks Jim. So I guess you just rest it on top without it actually fitting inside the carrier and strap it down. I would definitely like to see the wood rack you come up with. This sounds like it might be the way to go to avoid pulling a trailer. Do you guys usually wrap them in a tarp to keep road salt off or just use the sled cover.

  • 0
Posted

I have a cover for my sled. The mesh of the carrier will stop some of the slush but most is on the bottom of the sled. I hope to get out and get the rack done tonight with the big warm up today winkgrin

I will take some pics if there is enough light.

  • 0
Posted

It was tight but I could squeeze my lodge into my 4runner.

Dtro - what year 4runner? Anyone know if they fit in new ones? I bought a 99 Yukon with low miles to use for hauling my lodge, fit perfect in that. Crankcase ate itself on the first trip up to LOW this year. cry I need a lodgehauler.

  • 0
Posted

I have a 2003, which I believe is a 4th gen model.  The older 3rd gens are quite a bit smaller so it probably won’t work. 

 

 

The trick for me was to have the curved front facing forward and then lift the curve so it slightly rested on the headrests.  That gave me the room needed to close the rear hatch.   It was doable and I’ve done it several times, but throwing it on the snowmobile trailer was much easier, especially when fishing alone.

  • 0
  • 'we have more fun' FishingMN Builders
Posted

 

 It was doable and I’ve done it several times, but throwing it on the snowmobile trailer was much easier, especially when fishing alone.

What, that's not simple and practical I was told! lol. Sorry Lee. grin

  • 0
Posted

I have a 2003, which I believe is a 4th gen model. 

Thanks for the info. I trailer my lodge, but every time I do I wish I would have gotten the resort instead. smile

  • 0
Posted

I'm gonna pickup my otter xt650 lodge Friday. Can't wait!

  • 0
  • 'we have more fun' FishingMN Builders
Posted

I'm gonna pickup my otter xt650 lodge Friday. Can't wait!

Sounds good Lee have fun with it. I got a new Clam Voyager TCX this year and have yet to get out in it. frown Hope you don't sweat to death in there! grin

  • 0
Posted

I'm gonna pickup my otter xt650 lodge Friday. Can't wait!

Oh sure rub it in!!! grin

I am still using my 1999 Otter Lodge. My plan was to put on a new skin but that will have to wait until next year. I will get some pictures up tomorrow. Got too dark by the time I was done.

  • 0
Posted

Pics of my set-up:

full-4091-42094-img_1290.jpg

full-4091-42095-img_1291.jpg

full-4091-42096-img_1292.jpg

full-4091-42097-img_1294.jpg

full-4091-42098-img_1295.jpg

full-4091-42099-img_1296.jpg

  • 0
Posted

No wonder why you have to customize your rack. The lodge is huge! Thx for the pics Jim.

  • 0
Posted

great ideas, thx.....is there such a thing as "legal width" and would this be close to overdoing it? that looks really wide

  • 0
Posted

Thanks for the pics. I think I'll be making my own soon. I think I'm going to pick up a carrier without the raised rails on it. Northern has one on sale right now for $60.

  • 0
Posted

Sherpa you might want to watch Menards. They had a all aluminum for $50.00 last year right after I bought this one.

The width is less then 7' but the angle of the camera sort of distorts the view. It is just a little wider than the 4Runner.

  • 0
  • 'we have more fun' FishingMN Builders
Posted

Before you buy an Aluminum one I would look at the weight rating as most Alm, ones have a lot lower weight rating then steel. My buddy found this out one time when he found his load draging down the freeway! eek

Also if you carry your house like this, make sure that you have a cover as it is going to get a lot of road salt on it. frown

Nice setup Jim. wink

  • 0
Posted

Thanks I will definitely check menards. I'm always there anyways. And I will make sure to check the load rating too. I was thinking about just wrapping a tarp around it or making a cover out of one. I usually wrap it with a tarp when it's on the trailer even though I have a cover.

  • 0
Posted

This morning I went to pickup my brand new xt650 otter lodge. Paid $569 + tax. The box barely fit in my SUV. This thing is a beast! I'm going to assemble it in my living room. I hope it is easier to carry it out as it was really tough bringing it inside. I might consider transporting it with my trailer now. It's heavy!

  • 0
Posted

When I picked mine up in 1999 at Thorne Brothers I took it out of the box and had it strapped in the trunk of my Toyota Solara. I took it from there store in Blaine to Grand Rapids. I also set it up in the living room where it was nice and warm. Much better way to set it up and get everything right the first time.

Enjoy laugh

@ Leech and Sherpa: The one they had at Menards was a 500 pound load capacity. I like the idea of no rust vs knowing mine will start rusting soon with all the road salt.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.