Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • 0

is flooding a "normal" thing?


Question

Posted

1st time gas-auger owner. I encountered the dreaded "flooded engine" while on a fishing trip (my whole trip would have been ruined but I got some guys nearby to drill me holes!) This was my first time ever so I almost refunded my product out of frustration. I was able to fire it up following the StrikeMaster manual (take plug out, pull the recoil several times with full throttle on)

My question is: is flooding a regular occurence? How bad is it for the engine or spark plug? Should I always have a wrench with me then in case I need to clear the chamber on the lake?

10 answers to this question

Recommended Posts

  • 0
Posted

I have an older Strikemaster and have never had a flooding issue. I am not sure which model you have as they have changed engines. That being said, I always carry extra spark plugs for all my motor run toys just in case. I follow the Boy Scouts motto when fishing. "Always be prepared".

  • 0
Posted

My old Esky has never flooded in 30 years. Do you have a choke? I choke any cold engine until it fires. Once it fires, I move my auger choke to half open and it usually starts next pull. It soon starts chugging and I open the choke (move it to off). I carry a plug wrench but have never needed to use it. If it would flood, I'd take the plug out & disconnect the plug wire...then pull the rope a few times to force the gas out of the cylinder.

  • 0
Posted

......in the product's defense, it was user error: I set the auger down while it was running and the slow rotation of the blades caused it to tip over while running and it cut itself off soon after. now in my defense, I did say this was my first ever gas auger!!!! =P

It's a new SM 2HP Solo.

  • 0
Posted

I think you are thinking flooding is a huge deal, it's really not. If you ever have something flood, set it down and wait 10-15 mins and simply start it again.

  • 0
  • 'we have more fun' FishingMN Builders
Posted

Every motor Auger, Chain saw, Lawn mower, weed wacker has it's own way that it likes to start. Full choke, 1/2 choke, a little gas, no gas. You just have to learn what it likes! wink

  • 0
Posted

I agree with Leech, Once you get some experience with it you will start to understand what it likes and what it does not like.

Flooding can happen but is not the norm. Choke off, throttle wide open, and a few pulls of the rope should get it cleared out.

  • 0
Posted

here is a tip for you using your auger...never lay it down while it is running!! Turn it off before laying it down and restart. Once the auger has ran, starting them back up in the next ten minutes after, they should start easily.

  • 0
Posted

Every motor Auger, Chain saw, Lawn mower, weed wacker has it's own way that it likes to start. Full choke, 1/2 choke, a little gas, no gas. You just have to learn what it likes! wink

Another example, cars before fuel injection became standard. In the winter time pump a carbureted Ford 5 times before touching the key. Then keep pumping each time it turned over. On the other hand never touch the gas on a carbureted Chevy before it starts turning or it would flood.

That was my experience with them.

You won't have any more issues once you get some experience with it and learn what not to do.

We are spoiled with the electronic fuel injection on everything. But I do love the fuel injection on my boat motor. Starts in a second in any weather. So I'll take being spoiled. laugh

  • 0
Posted

To add to it, always let your auger idle back down after drilling a hole before turning it off. When the idle slows it has used up the extra fuel that was in there from drilling the hole.

The Solo can be a very picky bugger to start. I have it down now and havent had an issue all year, but your problem may NOT have been created by letting it run while laying down.

I have found when restarting a solo after it has been run recently (depends how cold it is outside as to how long "recently" means) that simply putting the choke on (moving lever to start) and pulling until it fires, then moving lever to Run is the best way. Do NOT touch the primer.

If it is super cold out or it has been a considerable amount of time since it ran, prime it once or twice, choke set to start pull until it fires, move choke to Run.

I havent had to make more than 3 pulls all season when following these steps.

That is provided I remember to set the killswitch prior to trying to start. LOL

  • 0
Posted

Huh. Sounds like you need to carry some tools along with you on those trips...I have a tool box in my truck at all times.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • CigarGuy
      My son got paid back for a good deed he did several years ago. He found a couple of expensive items at a boat ramp and called me asking what he should do.   I told him to bring them home because I was afraid if someone else found them, they might keep them. It was winter and nobody was around. This was when Facebook wasn't really popular yet, I was on several sites like this. First thing we did was make a big sign and posted it at the boat launch, then I posted it on all the forums I was on. Long story short, we never found the owner, but we sure tried. I know to this day, if either one of us found something, we'd do our best to get it back to the rightful owner.
    • Brianf.
      Yes, for sure.     A few years back, and unbeknownst to me, a piece of trim came off my sled while traveling over the lake.  A fellow sledder and complete stranger found the piece and followed my tracks all the way back to my cabin to return the lost item.  Couldn't thank him enough.  His kindness will never be forgotten and is something to which I aspire. 
    • Mike89
      I'll bet your son and his buddies did the happy dance!!!  
    • smurfy
      Sweet!!👍 there are still good people out there!
    • CigarGuy
      We got the auger back! The person who found it didn't want me to mention his name, we can't thank him enough! Still good, honest people around. He called Spring Bay Resort and asked if they heard of anyone losing an auger and they sent him a screenshot of my post. So, thanks to Dayis and Steve at Spring Bay Resort for that! Thanks again everyone for getting the auger back to us!
    • smurfy
      Hope your well on the way back to feeling bett5 bud!👍 Been able to avoid all the bugs going around so far 
    • monstermoose78
      Who’s been out? I got hit with the flu and am still recovering. 
    • CigarGuy
      That's what they're going to do. I always read these posts and wondered how people could lose or forget stuff, well it happens!
    • Wanderer
      Dang….  I know it’s your son, so kinda different, but I’d be expecting a replacement from those who lost it.  The group could each put in and wouldn’t hit one or another too bad.   But that’s just an old man’s thoughts….💭    Good luck.
    • CigarGuy
      So my son and buddies were out this morning fishing between Wakemup and H.O.L. Bays (probably between Metza's pt and Schmidt Island), so they had to cross the snowmobile trail to The Landing. Well,  MY Strikemaster 24 volt auger fell off the back of my sled.  They didn't realize it until they got back. If anyone found it, would be nice to get back...please and thank you. Good news is they had the battery in their pocket..... Dip $hits😡
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.