Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • 0

Trailer repair not going too good


Cyberfish

Question

Got what was left of the hub off, and the spindle was just shot, about a quarter of the bottom was just shaved off. Unfortunatly it is welded onto the axle, so i cannot just go buy a new spindle and bolt it on. Tried putting the "good" hub on the bad side to see if it would still work, it wouldnt even fit on it anymore, gave up and tried to pull it back off, and guess what stuck to the bad spindle, yup, the "good" back bearing, though it is not so good, looked all rusty and the grease was nasty dirty brown, guess that one was about to kick the bucket too. Uggghh IF I ever get this thing on the road again I will be careful not to ignore bearing maintanece again...

------------------
><}}}("< ---><!>

Link to comment
Share on other sites

5 answers to this question

Recommended Posts

  • 0
  • 'we have more fun' FishingMN Creators

Do you know a welder?
Take off the axel.

You have a few options
Cut the spindle off and have a new one welded on.

Buy a new axel.

Buy new spindles and square tubing and make your own axel.

Link to comment
Share on other sites

  • 0

I had a similar experience last year. I had a spindle break and had to replace the axle. Mine was an odd size, and was not available at FF, or Northern. If you are in the same situation, I would highly recommend Pioneer Rim and Wheel in Minneapolis. I got a new custom made axle with hubs, bearing, seals, etc... for just a little over $100. Good Luck!

Link to comment
Share on other sites

  • 0

Cyberfish,

I know of a guy that sells complete axles for $60/new. Includes spindles, bearings, shackles and springs.

What is the width of your trailer? He might have something for you.

Link to comment
Share on other sites

  • 0

I removed my axel today and am going to find a spindle hopefully and have it put on! I cannot believe I didn't think of removing the axel! I was trying to figure out how I was going to get my whole trailer somewhere to get a new spindle put on! I don't know about me sometimes! blush.gif
Thanks for your suggestions everyone! I would be a beached carp without your help, but now it is looking like I might get out on the water again soon! grin.gif

------------------
><}}}("< ---><!>

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Andre.y
      I would not call a casino an active income, everything is very situational there, it does not depend on you, but on the casino itself, so you need to be very careful about this
    • Kira
      I agree with you. But you will definitely need better components to set up an Rl craft hosting service. First of all, you will need the latest version of Forge. For hosting rlcraft requires these details  .  Furthermore, hosting a server also requires 3 to 4GB of RAM.
    • tironmings12
      Hi, I remember going to university and I stopped going out because I couldn't keep up with my writing and I stayed at home all the time. But then a friend of mine told me about: brillassignment review .  The BrillAssignment.co.uk team is made up of highly qualified writers, born and bred in the UK, who will do all the work for you. And you'll be out walking in the meantime .   
    • leech~~
      Hei, jeg vil gjerne anbefale deg lutefisk!  😋
    • tironmings12
      Hei, jeg vil gjerne anbefale deg det beste nettcasinoet: top casino norge. De første tegnene på de beste virtuelle klubbene vises i begynnelsen av spillet eller når du oppretter en konto. Institusjonen skal ha et tiltalende design og brukervennlig grensesnitt. det er mulig at mange nye brukere ikke forstår hvordan de skal trykke på knappene riktig og raskt forlater ressursen. De fremtredende knappene og det intuitive grensesnittet er spesielt viktig.
    • matt320
    • Fasterok
      I can tell you how you can easily find out about a variety of companies that provide just the same ways to play, for example create a variety of slot machines. I found pokiesman.com/bally/ and now I am very satisfied. I recommend to read here just to learn a lot about this developer. I hope I was able to help you because it's really hard sometimes to choose a quality slot machine. Now it's all easier to do.
    • Fasterok
      I can also offer you advice on how to easily compose a variety of term papers. This is a difficult task that calls for professionalism. This serves as an illustration. You may view the profiles of experts who can assist you in creating such papers at compare and contrast essay writing service . I hope I was able to assist you and that you were helpful. Good fortune! 
    • LakeofthewoodsMN
      On the south end...  Walleyes are starting to stack up in various areas of the south shore with some good fall fishing taking place.  Most anchored up jigging with fatheads and frozen shiners.   Various techniques are still proving effective in catching, but as water temps cool, jigging will be the desire of walleyes and has been successful this past week.   Trolling crankbaits is still catching fish.  If you are struggling catching the fish you are jigging or the fish are spread out, try pulling cranks which will put your lure in front of many fish in which you only need a taker here and there for a successful day. Good numbers of fish are still being caught pulling spinners, especially over flats or on the outside of structure.  On the Rainy River...   Some very good reports on the Rainy River this week.  Shiners are in the river and so are the walleyes.  Is this the big run, not sure, but most are catching fish, and some big ones.   Anglers report nice fish both in Four Mile Bay and the river, but these fish are moving around.  Try different spots until you find them.  Look for clouds of emerald shiners, they show up nicely on most sonar.   This is the fall run and it should only get better.  These river fish are moving, once you find them, it can be a memorable day.  Looking for fish, trying different spots can be helpful in finding fish.  Anchoring up in the same spot all day hoping the fish come through can make for a tough day.     Jigging with a frozen shiner or trolling cranks in the river are both catching walleyes. Sturgeon activity continues to pick up as water cools.  Most fishing the holes of the river.  A 3 - 4 ounce weight with lower current has been sufficient combined with a sturgeon rig loaded with crawlers or crawlers and frozen shiners. Fall is a great time to take your own boat on the small waters of the Rainy River.  Boat ramps scattered from Wheeler's Point to Baudette east to Birchdale.  Up at the NW Angle...  Walleye fishing stays consistently very good up at the Angle.  Walleyes are being caught using the three techniques mentioned above.  Some fishing MN waters, others venturing amongst the Ontario side of the lake.  Good fish being caught on both sides.   In addition to fish still over deep mud, traditional structure is also holding walleyes.  Points, rock islands, sunken islands, neck down areas, etc.   Some nice muskies were caught this week.  October is traditionally a great month with trolling shorelines in the mix of techniques.   The government of Canada has officially announced they are lifting the COVID vaccination requirement and is allowing the ArriveCan app to be optional starting October 1, 2022.  This will make the drive to the NW Angle for many, which includes about 40 miles through Canada, once again possible.  
    • ADAS
      Ever heard of ATI Systems? ATI Systems is dedicated to creating fully integrated multi-channel mass notification systems and is capable of adapting and optimizing a wide range of notification systems https://www.atisystems.com/solutions/campus-safety/ . Quickly integrate existing public address sirens into ATI's flagship system for monitoring and control with ease. ATI's team of engineers has the knowledge to both augment existing systems and create cost-effective solutions for customers needing to integrate their current system into ATI's full-featured mass notification platform.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.