Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • 0

Lowrance X51/any locator set-up help, tips?


mnrstrider

Question

Guys, I'll be the first to admit, I'm not sure I have any idea of how I should have my Fish finder set-up... Currently I'm running an Lowrance X-51, but to me it never seems to do a whole lot. I have yet to ever identify any spots of bait fish, I feel that it doesn't really see the fish or the bottom real well. People say I should be able to do things to it to be able to see the Thermoclines, honestly I'm lost... Right now the basic setting I'm running are grayline at about 65%, scroll speed at either full speed or 80%. 100% sensitivity I'm running in "fish" mode, because I can't seem to figure out the other modes. Overall it doen't seem to be much of a fishing aide, other than depth. It never shows the bottom well, it doesn't seem to ever mark fish below the last 2-3 feet of the depth.

Does anyone have tips on how to properly set this thing up? or links to a general how to? I heard there is videos out there but have never seen one. Sure, I'm 24 grew up with computers and VCR's, video games, fuel injection, and this thing puzzles the heck out of me. I have the owner's manual, and have read it, but it never seems to help me either. Help a guy out here grin.gif

-Nick

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

  • 0

sounds like you have things set right, maybey a bit high on the grayline, and turn the fish ID off and never go back. Id check to see that your transducer is properly set, make sure that its not pointing too far forward or backward..? one other thing, you need to be over fish to see them, Duh.

Im no expert but theres a bunch here that run that unit that can help. good luck!

Link to comment
Share on other sites

  • 0

mnrstrider
How deep of water are you fishing?You should get good bottom definition in most all depths but if your in 10 feet or less it is really tough to see fish because they have to be in a 3 foot diameter circle under the transducer.The transducer that comes with the x51 you will be looking at an area of approx. 1/3 the depth, 30 feet of water you will see 10 feet of the bottom and less if the fish is suspended!
also i run mine in all manual (if i remember right) no auto except for the depth control and no fish id as stated before!also I think your speed is a little fast(i think i run mine on 75 to 80)but i will have to check!
good luck

------------------
Try Too Fish
Forced Too Work!!:)

Link to comment
Share on other sites

  • 0
  • 'we have more fun' FishingMN Creators

Inexperienced users should start with Auto settings. Once you have a full understanding of functions and features start playing with settings one at a time with manual settings. In time you'll learn how to get the most performance out of your sounder.

Go through your manual and double check your transducer mounting.

Minimize interference by using a designated battery for the sounder and keep the transducer's cord away from power cords.

Keep your depth scale close to the depth your in. In other words if its 15 ft deep set your scale to 20 ft as apposed to 30 ft.

Run your gain high enough to were your just starting to pick up clutter.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • FrankOcean
      With all that amount of guests you have, you need to create the application, yes or yes, it will facilitate communication between you and your clients, making it possible for you to answer each query, doubt and order that they ask of you, in addition to being able to charge them for your service with total comfort, try try to contact a company that is dedicated to developing this type of applications, although I cannot know exactly how much the creation cost will be, so try to have enough capital to spend
    • Pat McGraw
      CigarGuy, Crappies shallow or suspended?
    • Colin45
      To create such an application, developers specializing in investment applications for banks and other financial services are needed. At https://mangosoft.tech/industry/investment-software-development/ you can order the creation of investment applications from scratch or find ready-made solutions.
    • Andre.y
      great app idea never heard of commercial apps before. it seems to me that the fastest way to find developers on any exchanges, that is, you need to place your ad and then you will be offered all possible options
    • Conan Bail
      It seems to me that this is excellent advice, but one option is not enough, I think. You need to look at a few and decide which one is best, it all depends entirely on the customer.
    • Andre.y
      the best option is to entrust such work to other specialists, but you will have to pay a lot of money for this, but still I think it's worth it to get a quality product that you will have to work with for a very long time, if not all your life
    • leoholmes
      so much interesting info, thanks
    • leoholmes
      This way, you can be sure that you are getting a high-quality written by a competent writer.
    • leoholmes
      Tips for Reducing the Stress of Writing High School Papers  
    • leoholmes
      High school is a pivotal time in every student's life. The challenges of this period range from the courses themselves to the social pressures that come from interacting with peers. One of the main challenges high school students face is writing papers. The reason for this is that writing is a skill that develops over time, and many high school students have never had to produce a paper before. High school students need to write papers for many different classes. These papers may be research papers or essays. These different types of papers all require different skills for help write my paper. However, high school students may struggle with all of them. This is because they aren't used to producing writing on a regular basis.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.