• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Join In - We Share Fishing Reports & Outdoor Information Here

     
      You know what we all love...

      The same things you do!!!! Share what you love & enjoy in the outdoors as well as thank those whose posts you 'appreciate.'

      Have Fun!!!

Sign in to follow this  
Borch

Patterning Info, Results and Questions.

Recommended Posts

Borch

Looks like you got a good combo!

Share this post


Link to post
Share on other sites
rundrave

Patterning my 870

Please note that hese results are not completely reliable, but I am a noob turkey hunter, going out for my 2nd season ever and hoping to bag my first turkey ever. I am heading out on Friday to hopefully fill my 2 tags over the course of 3 days, and wanted to pattern my gun as I was curious to see the results.

To get by I am shooting my trusty 870. I know there are alot of other new guys to turkey hunting in my same situation shooting the same gun. Last night I went out and shot at 30yrds and 50yrds using the target provided in the patterning thread. I took pics of the targets after each shot, and used a range finder so I was pretty sure on distance etc.

Gun: 12 Gauge 870

Choke: Extra full turkey choke by Undertaker

My first shell choice was the following:

IMAG0168.jpg

I used a range finder to set my target out at 30yrds and fired away. Here is the results.

IMAG0165.jpg

I was pretty happy with the results? It looks like I was a little high and to the left but would have probably killed the bird. Also keep in mind that the bigger hole in the head was more from me pulling the tape off than a bunch of bb's.

Here is my results with the same shell at 50yrds, again using a range finder to determine distance.

IMAG0167.jpg

This one I definately was a little high on the shot, not sure what to make of the pattern?

I then decided to try another shell but use the same choke and shot the following:

IMAG0169.jpg

As you can see its a little lower fps, but 2oz instead of 1 7/8oz.

This was the pattern that I got at 30yrds

IMAG0166.jpg

I am pretty happy with the pattern but looks like I was a little high again but this time to the right but would have resulted in a dead bird.

Unfortanetly I didnt get a pic of this shell at 50yrds but it was very similar to the first.

My overall conclusion from this small experiement is to maybe work on aim smile All kidding aside, I was just about to go out and hunt for 3 days, and had no idea of what my gun was doing.

I strongly suggest getting out and patterning your gun. With a little bit of effort, and a few wasted shells you will know exactly how your gun is shooting and also gain confidence in preperation for your hunt. The patterning can be a frustrating, painful and expensive endeavor but the better off you will be in the end.

Share this post


Link to post
Share on other sites
kevfish1

3" winchester xs3 with a full choke---- What shell would you recomend

Share this post


Link to post
Share on other sites
Archerysniper

The federal 6's with flight control work really well out of my SX2,with the full choke it should get you to 35 yards maybe good at 40. I would recommend a extra full turkey choke to extend the range a bit farther.

Share this post


Link to post
Share on other sites
benbosh

I highly reccommend giving the federals with the flite control wad a try. I used 3" 5 shot with my 870 and took a jake at 40 yards with a H.S. Undertaker choke tube and last year took a tom with same set up at 12 yards, only I used a Tru-glo turkey choke since I lost my H.S. I had good patterns with both chokes/federal combo but the undertaker gave me a really good pattern compared to the tru-glo.

Share this post


Link to post
Share on other sites
engfish

+1 on Federal 3". I shoot it out of my Mossberg 535 with a stock full choke and have had excellent results.

Share this post


Link to post
Share on other sites
Fishman11

A TIP: Try aiming at the neck area instead of at the head that should take care of the high shots. Worked for me. grin

Share this post


Link to post
Share on other sites
bluehat28

Plus 1 on the neck shot looks like your tryin for the head.PS I shoot a 20ga Bennelli with The Undertaker and Federal Premium Turkey loads 3in. I have no problem with the patterns @ 35 yrds

Share this post


Link to post
Share on other sites
Sorgy

When shooting my 870 and sighting down the rib I consistantly hit high. Now I aim for the top of the beard instead of the waddles. My first turkey I got with one piece of shot to the brain- I did not keep my head down. For that reason a red dot or a set of sights that you can adjust would be a big bonus.

Good Luck

Steve

Share this post


Link to post
Share on other sites
goblueM

I'm taking my dad out turkey hunting this spring for the first time - which means I'll be giving him my 12 gauge and scope

I'll now be hunting with my 20 gauge Benelli Montefeltro previously only used for upland. It has a mid-rib bead so I think I should be ok without buying a scope or fiber-optic sights

I got a Cabelas choke with a .575 diameter, rated for lead, hevi shot, and copperplated loads. Any recommendations on shell selection for those that have used 20 ga for turkeys?

Share this post


Link to post
Share on other sites
bluehat28

Thats the same gun I use, after buying and trying many different loads the Federal 3" Turkey load #5 with the flite control wad is my choice.Hope this helps.

Share this post


Link to post
Share on other sites
goblueM

great, thanks! I will have to give that a go.

I may have gone just a bit off the deep end and ordered a Double Bull blind, so I suppose I can use my bow hunting out of that smile

Share this post


Link to post
Share on other sites
Borch

In my daughter's 870 20 gauge Prinos Tightwad with hevishot # 6 or #7 shot has been devastating on turgets to 40 plus yards. Runs a little tighter that your cabelas choke(.570).

Share this post


Link to post
Share on other sites
Powerstroke

I've also had great luck with the 20ga heavishot. Its expensive at first, but once you know it patterns you only need one shell. They hit hard and fly well from a 20ga.

Share this post


Link to post
Share on other sites
Musky Buck

Dumb ? I know but why is there a 4 shot or smaller rule on turkeys ? The only thought I have is the shell companies want us buying this turkey load rather than use what many of us already have in goose or duck loads ? Just curious, have never heard why that is.

Share this post


Link to post
Share on other sites
DonBo

Dumb ? I know but why is there a 4 shot or smaller rule on turkeys ? The only thought I have is the shell companies want us buying this turkey load rather than use what many of us already have in goose or duck loads ? Just curious, have never heard why that is.

Small vital area on a turkey - head and neck only. Shoot your gun at a patterning board and see for yourself. Huge holes in the pattern at 30+ yards, holes that a small turkey head will fit inside of. Smaller shot fills those holes.

The larger shot used on waterfowl is for penetrating deep into meat and breaking bones of flying birds to bring them down. That same shot on a folded up wing of a turkey will likely only cripple.

Share this post


Link to post
Share on other sites
Musky Buck

Right on thanks Donbo, I'd question penetration by waterfowl loads though, those steel pellets penetrate very poorly, they bounce off geese like crazy, if you don't bust the wing or clip the coconut you get the drift, back in the lead days with a full choke, 30" barrel and the best goose load ever made # 4 buckshot, good night Irene. Now most are upping to a 3.5" 12 or 10 gauge even, those guns were way unneccesary in the lead days. But, I get the turkey thing, you blast like a T shot at a 30 yard target and there could be a hole big enough to fit the turkeys head/neck in when you have those extra pellets in like a number 5 those are on the head of the target because there's more of them, thanks Don for clarifying that. And PS. the Toms were gobbling like mad last night before dark when the sun was just perfect on the woodlines.

Share this post


Link to post
Share on other sites
Borch

There is also a safety factor as turkey hunters use decoys and do their best to sound like a turkey. One of the reasons that stalking turkeys is often frown upon. Smaller shot results in less retained penetration at longer distances.

Share this post


Link to post
Share on other sites
Archerysniper

There is also a safety factor as turkey hunters use decoys and do their best to sound like a turkey. One of the reasons that stalking turkeys is often frown upon. Smaller shot results in less retained penetration at longer distances.

+1 you hit the nail on the head. #4 shot and smaller will equal less fatalities for accidental shootings

Share this post


Link to post
Share on other sites
Neighbor_guy

After getting a last minute invite for the weekend I grabbed my coyote shot gun and some shells to pattern test it with something other than dead coyote T shot or 3" #4 copper buck.

First let me say you hard core turkey guys are nuts! That had to be the most painfull shooting I have ever done, I'm still sore.

So. Mossberg 535 pump 12ga. Carlsons extended range dead coyote choke. Winchester Super X (or something like that) from wanderer's personal stash, federal copper coated #6 +#5 with flight control, and federal buffered lead turkey loads in #4 +#5. 3.5" shells for all parties. 2shots each at 20 and 40yds.

Ended up picking the regular (cheaper) 4shot hardened buffered lead from federal. It was hands down better than the rest at 40yds.

And unless I decide to put a red dot on this gun I am very happy that I don't need to do this again. Made me wish I could've found something for the 20ga instead.

Here's to hoping for first timers luck.

Share this post


Link to post
Share on other sites
Archerysniper

Nobody believes me when i say that will be the most recoil you have ever felt. You could have used mine 3-1/2" 2-1/4oz of 5's she's a real gem to shoot

Share this post


Link to post
Share on other sites
11-87

What do you prefer brand wise for a 20g mosseberg.  12yr old daughters  gun? 

 

Looking for choke info.  

 

Thanks 

Jerry

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • martinbrown1269
      I also have experienced some bad days, for preventing that day I bought a towing truck which we are using for personal use and also for towing roadside assistance nyc.
    • bassbouncer
      We had a 19-1/2” that only weighed 1.85#
    • Raven77
      Thanks.  That was my hunch!
    • Matt Johnson
      Weekly Metro Area, MN fishing video report and tips for May 19. Things are continuing to move along right on track, even though Mother Nature likes to play games with us! A few hot baits for bass, as well as some locational ideas...   Metro Area MN Report for 5/19 VIDEO - CLICK HERE   Have a great week!!
    • smurfy
      yea I keep thinking of getting a different motor but runs good. its a 40 Johnson. I am happy with the boat itself and don't plan on a different one either.
    • ANYFISH2
      There are good panfish, both above and below Pillager dam. in Lake Placid, As the water warms, look for the milfoil beds on the north side of the river to establish itself.  If the edges as well as the deeper water adjacent to the weeds.  I like to fan cast a split shot rig vs. a bobber set up. Below the dam, in summer panfish can be caught directly below the dam as well as near Cty 1 Bridge and along most of the inside turns of the river east of there. There are some nice sized panfish in the system, please let the bigger ones back.
    • JBMasterAngler
      Anyone ever fish this lake before? Looks like it could be a good early season lake. Where exactly is the access? Is it a marked road? Pay box or do I have to go to the house and bother the guy? Appears the river might be too high to fish next weekend, so it’d be nice to find a little solitude on a nearby lake over the holiday weekend.
    • 208ProV
      I was the one with the 26-1/2" fish yesterday that weighed 5.15 #s. Was a skinny spawned out walleye!  Catch her again in 2/3 weeks and she will be 6/7 lbs for sure! 
    • JerkinLips
      I'm sure that the 5.15 pound walleye was a skinny 26" fish.  The regulations book lists a 20" at 2.7 pounds and a 26" at 6.2 pounds.
    • PRO-V
      Believe it or not it's a 1993 1660 ProV with a 2 stroke Pro 60 Yamaha. Still runs like a champ. I'm starting to get to the age that it doesn't pay to get a new one. It's always stored in the garage unless we're on a trip.