• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Join In - We Share Fishing Reports & Outdoor Information Here

     
      You know what we all love...

      The same things you do!!!! Share what you love & enjoy in the outdoors as well as thank those whose posts you 'appreciate.'

      Have Fun!!!

Sign in to follow this  
13Below.com

This Thursday-Sunday - Suggestions?

Recommended Posts

13Below.com

Heading up later this week with a few guys to do our annual Winnie Ice fishing trip. Will be good to get up there even though the weather Thursday does not look inviting.

Wondering if anyone has had ANY luck after sunset on this lake ice fishing it? In years past we either did well during the day with perch or didnt do well at all during the day. Then we had some decent walleye action right towards sunset.

Also, anyone have any reports on depth, location out there in the last week or so doing any good?

We are a little concerned about mobility. Not because of the cold, but the reports on the roads. We have 2 full size trucks though.

We also have a bunch of guys going to Upper Red this weekend and we might head over there. I hear excellent reports on that lake right now.

Thanks, will report how our few days went.

-Daniel

Share this post


Link to post
Share on other sites
HIGHBANKS

We put our wheeled houses out this past week and this past weekend we had them all occupied. We had a number of 22-25" walleyes being caught throughout the evening hours with a few in the "keeper size" range also. They are out on the humps in about 24' of water. Most guys using either shiners or fatheads for the walleyes. we've got a good road system in place. We are out almost 4 miles to the northwest and the north to Perch Bar. Stop by the lodge and we'll give you a map of our road system along with an updated fishing report.

Share this post


Link to post
Share on other sites
wingnut38

can you get off of the road all right with a pickup or is the snow too deep? we would like to come up soon.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • papadarv
      Keys to make the blade work well. *Sharp! *Cutting edge needs to line up to the Gullet of the opposite blade! *Add a .020 shim 1/8" wide between blade screw and cutting edge. Increases cut angle to same as K-Drill! I'm working on another set welding  1/4" piece of blade to the outside blade edge extending the blade 1/2" past auger flight making it a full 8" hole. Note how the K-drill blade extends 1/2" past the auger flights.  
    • leech~~
      I like your blade work as well. Two summers ago when I sold my hand auger at my garage I think I throw out about 4 sets of those old blades as well!  😣
    • papadarv
      Made the drill point out of a spade drill bit welded to a 3/8” 16 bolt/screw than cut & ground to shape the point. Drilled & tapped center of blade bracket. Tap slowly as that steel seem a grade or two above basic mild steel.
    • bluewater2
      Thank you  
    • leech~~
      That is some sweet work right there. I see these at garage sales all summer, may be I should start picking them up?  Looks like you added a drill point on the end of them as well. The adapters and the end point are key items on making these right.
    • papadarv
      I went a different route, got several vintage Mora 7 1/2" hand augers $10 to $15 each with the old hardened sweedish steel blades modified to replicate K-drill style blades #5. Went with clam plate 3/4" drive bit & M18 Fuel Mud Mixer worked ok on early ice #1. Wanted to try my DeWalt/Jiffy so converted to the 7/8" drive bit, didn't have the power to cut the agressive blade #2. Later ice in Wheelhouse, went with my Eskimo 43cc with a Walker 25' flex exhaust out the door, cut 32" ice in 27 seconds #3. Ran 4 1/2 holes to 1 of my buddies new green ION 8in. Made some adapters to put the 7/8" auger bits on my Clam Plate and Mud Mixer#4 for early ice this comming season.
    • Wanderer
    • ANYFISH2
      OUCH!!! 6 players down to injury in one game.  We were thin at O-line depth before, now we have "1st" line players having to play nearly an entire preseason game, because we dont have enough bodies!  This is going to be major issue going forward.   Overall, not a good showing offensively. Jacksonville is a very good defensive team, but we definitely need to be better.   Defense, look pretty good!  We need to complete turnover chances, at a better rate.     3rd RB race is going to be fun to watch.   Special teams, are kinda leaving me wondering.  Punt coverage is quite shaky.  Carlson is looking more like our guy, after Forbath missed a 41 yd fg.
    • Borch
      That's ok.  Was a good day on the water.  Took my wife out this afternoon and had a nice day fishing.
    • ANYFISH2
      Bass, especially Smallmouth Bass.   Why are they my favorite? A symptom of growing up along the Mississippi I would imagine.  The walk along the shores of The Miss. have given me pretty much every species that swims here.  Nothing get me more excited than the acrobatics or the will of a Smallmouth.   In open water I just seem more drawn to grab the bass bag and chase bass more than other species.  Come fall, it will be tunnel vision, bronzebacks.