• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Join In - We Share Fishing Reports & Outdoor Information Here

     
      You know what we all love...

      The same things you do!!!! Share what you love & enjoy in the outdoors as well as thank those whose posts you 'appreciate.'

      Have Fun!!!

  • 0
Sign in to follow this  
Reaper8

Opinion poll, Used or New for power auger?

Question

Reaper8

I am looking to buy my first power auger, I have seen the posts on here about auger problems but also want to get a good deal. Anyone have an opinion on new or used? Is it worth saving $150 or is there too much headache?

Share this post


Link to post
Share on other sites

12 answers to this question

Recommended Posts

  • 0
Johnny_Da_Der

i don't see a problem with used, but it all depends on the auger.

price, condition, etc...

remember if you buy a brand new auger today it's only gonna be new until its used. next year or the year after that, it's not gonna be any better than what you see on c-list. might even run a little better after being broken in.

it's like buying a car. you might just be paying for the new car smell and could save a ton of money by buying the last years model with 15,000 miles on it. might want to stay away from late eighties rust bucket with 285K on the odometer though.

Share this post


Link to post
Share on other sites
  • 0
eyebjim

Don't forget to check into factory reconditioned augers. You can save about $90.00. I just bought a 8" SM lazer recond last week. Works like new. Type in recondition auger into goggle.

Share this post


Link to post
Share on other sites
  • 0
guitarcher

I purchased my first power auger this year and looked for a used auger and opted to buy new. I think you can find a good auger and save a few bucks, if you are patient and don't mind driving to check them out, but I paid $300 out the door for a 2hp 8 inch Eskimo that works great, and has a warranty.

Share this post


Link to post
Share on other sites
  • 0
deadeye

I personally would do used. I dont see the point in getting a shiny new one when its going to get dinged up anyway. Plus if there was a problem with the auger, its likely to have been fixed.

The only advice I can give you is to make sure you can hear it run and possibly pop a couple holes with it before you buy it. You dont want to drop a bunch of money on a auger that someone has let the gas sit in for 2 years without running.

Share this post


Link to post
Share on other sites
  • 0
Reaper8

Good points! I appreciate the feedback, I just bought a Vexilar FL-8 SLT off CL and it works great. So we will see what I can find and I will definately check the reconditioned ones

Share this post


Link to post
Share on other sites
  • 0
Jiggem Up

I just purchased a used power auger off C-list and am very happy with it. It runs great. plus, it's got the old-school chipper blade so the blades are easier to keep sharp and in alignment...along with being cheaper to replace.

Share this post


Link to post
Share on other sites
  • 0
Big Dave2

Quite a few years ago I bought a brand new 3 hp jiffy auger that I had for 2 or 3 years that I could not get to ever run to my satisfaction. I found a deal on a used 2hp Strikemaster and have been using it ever since and it still starts and runs great.

Share this post


Link to post
Share on other sites
  • 0
Sandmannd

Bought a used Jiffy a couple of years ago and it served well. Bought a "demo" stikemaster at D-Rock for just over $300 last year and sold the Jiffy for $150 about $30 more than I paid for it. So it was nice to have that step in between. Got the job done, just not as fast or light as I wanted. But it split the cost for me over a couple of years anyway.

Share this post


Link to post
Share on other sites
  • 0
Jim Almquist

I sold my old model 30 Jiffy 9" last year when I got my Nils and it was 20 years old and I would bet with proper care it would go another 20. Proper care,good gas and a little TLC can make any auger last a long time so going used can be good but buy from someone you know or when you buy from a stranger look around and see if the person looks like they take care of there stuff.

Share this post


Link to post
Share on other sites
  • 0
snoozebutton

I bought a new one last spring on a close out special from Gander. If you can find a cheapy to get you through the winter and check on the close outs in the spring you can get some good deals. Then sell the cheapy next fall when the prices are higher.

Share this post


Link to post
Share on other sites
  • 0
BLACKJACK

I prefer to pay a little extra and get new, if I have problems, its still under warranty, and by buying new I know how its been cared for. I bought a new Strikemaster Lazermag 10 years ago and it runs like a charm, starts on the 3-4 pull every time, still cuts like mad. I run the gas out every spring and thats that. This was after buying a used auger from my brother, he had bought it at a garage sale, even after a $80 bill at a fix-it shop its still ran like doggy doo. For me, new is the way to go.

Share this post


Link to post
Share on other sites
  • 0
Northlander

Go new if you can afford it. I like having a bit of warranty if I have problems.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • jigginjim
      would like to see a protected slot on bluegills, 10 to 12 inches go back. only one over 12 inches.
    • delcecchi
      Stands to reason that clogging up the dock at a public access would irritate people.  Most of those docks aren't very big.  That problem didn't occur to me.    
    • Jetsky
      PSU,   Fished the evenings last Th, Fr and Saturday.  The smaller side bays in Frazier with slip bobbers and leeches in about 8 ft of water at dusk. Thursday night my son and I caught 7 eaters.   Friday night the good news was that three of us boated about 30 walleyes.  Bad news was that only 6 were eaters.   All very small but they were really feeding in the warm shallower waters. Saturday night was very slow.  Just a few small ones.  I haven't been out the last three days. I've seen a few mayflys in Frazier Bay but no major hatching yet.
    • DonkeyHodey
      I can't help you with access, but I have a friend that regularly fishes stump and sagatagan--apparently the lakes are infested with norts and that's what he targets.  Lots of 2-5 pounders. (I suspect if you're targeting bass you'll end up catching mostly norts.)
    • BIGFISH.JZ
      It appears that most of the bass are off their beds on the deep clear lakes near Hackensack/Longville. I did see 1 smallie guarding the nest still. The winds have the minnows piled up on the NE corner and I'm sure the walleyes were there, but I struck out on my first lake (1 smallmouth). Only fished for eyes for a little over an hour in the morning darkness. As the sun was rising, I switched lakes and was excited when a decent smallmouth smoked my small wake bait as soon as it hit the water on my first cast on lake number 2. Ended up catching over a dozen around shallow rocks and deep cabbage before it was time to go to work. Didn't get much sleep last night, but it was well worth it!!
    • PSU
      Any recent fishing reports for Frazer/Smarts Bay area. Didn't fish much last weekend (maybe four hours), but it was REALLY slow for me. First time I haven't keep a keeper in quite some time. Depths, technique and bait choice would be welcomed! 
    • Grindstone29
      Fins - same for me yesterday.  Fished three hours in the evening last night.  Pretty big wind still at 7pm.  Caught 5 walleye (all dinks) and a northern.  I went out for two hours this morning, mainly graphing.  Stopped near Cranberry Island and caught one 15 inch for dinner.  Will go out again this evening for advanced scouting.  Big group coming up over the 4th of July and they are expecting to catch fish.  Maybe i'll have to reset expectations... 
    • Hoey
      I do not target smallies, but I do run across them when fishing shallow, rocky areas, typically along the shore and back in the small bays.  The ones we have caught were nice and strong, running from 19 to 21 inches.  Good Luck.
    • SkunkedAgain
      At least a decade ago, I was fishing in Head O Lakes west off Taylors Island when I got a heavy snag in 35ft. I kept pulling up what felt like a log until it appeared at the surface. It was the underwater power line that I think runs out to the island where everyone fishes muskies. I carefully unhooked my jig and let the line fall back into place in the lake.   I'll keep an eye out for your prop!
    • SkunkedAgain
      I called the Soudan Mine today and was told that you can't leave your boat at the landing in Stuntz Bay. She said that it was "strongly frowned upon" and that she wasn't aware of any way to boat to the mine. Maybe that will be something that happens in the future.