Jump to content
  • GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • 0

Lowrance 520C


PL Sportsman

Question

I have a 520C and I lose the bottom on the sonar constantly. From what I have researched I need to update the software. I did so but my unit didn't take the upgrade.

Does anyone have any experience loading the software. I loaded it on a MMC card and put it in the unit and turned it on and nothing happens. I do to the software version and it still says 1.4 not the 2.3

Any suggestions?

Thanks,

Paul

Link to comment
Share on other sites

10 answers to this question

Recommended Posts

  • 0

You may have special instructions on the lowrance site for downloading on your particular devices. Extraction instructions and stuff. The update for the 525 was a dream.

Link to comment
Share on other sites

  • 0

Did you download the update file which has a *.exe extension?

After downloading that file, double-click it and let the self-extractor lead you through the process. It'll ask where you want the files stored (which will be the MMC card) and if you want the update files to be automatically deleted from the MMC card upon completion of the update which is totally up to you. After it has loaded the file onto the card all you should have to do is insert it into the 520c and power it up. Be sure that you are using a completely blank MMC card when loading the update files. It seems to help.

Link to comment
Share on other sites

  • 0

You will also want to make sure that your MMC card is no larger then 1 GB or your unit might not recognize it. Just had that problem with my H2O and had to go back and read some old threads and was able to do the upgrade with no problem.

Link to comment
Share on other sites

  • 0

Check your sensitivity setting on it as well. I have the 522c and on the recomendation of another post I set it down to like 50% and it read the bottom in shallow water fine then.

Link to comment
Share on other sites

  • 0

You are not alone. Check the older threads and you should be able to mix some suggestions into a solution. I had the same problem with my 522 and I recently installed the update and now it works a lot better. As Sandmannd suggested, I've been trying to adjust sensitivity manually and it seems to be helping out quite a bit. Good luck!

Link to comment
Share on other sites

  • 0

I have the exact unit and have been having the same problems I loaded the software one time and it work perfect on Mille lac and then few days on a metro lake later it didn't work worth a c r a p. So I loaded it again and the last time out it work alright. What ever happen to when you could by a high buck item and it would last for many years and you didn't have to load a bunch of c r a p on it? It worked fine when I installed it last year .What changes of the winter that you need to do all this?

Link to comment
Share on other sites

  • 0

if you continue to have problems check with the sporting goods stores in the area some carry the upgrade chip..and just bring unit in and they will upgrade for you..takes about 1 minute..in st. cloud just went to scheels and was in and out..plus you can look at all the fishing stuff!!!!

Link to comment
Share on other sites

  • 0

Thanks for the help! I updated my unit and it flashed originally but once we started to move after I adjusted the sensitivity it worked good. We were on a very shallow weedy lake also.

Paul

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Rick G
      Work has pretty much kept me from fishing since late May😕 Did have the chance to hit the water for a few hours yesterday. I opted to hit the river for some smallie action with my limited time. The Sippi didn't disappoint, the brown bass had the feed bag on big time!. I hooked over 30 fish in 3 hrs, most being 15-17inchers with a few bigger and a few smaller mixed in.   Weightless stick baits rigged on a 1/0  is all I needed to throw.  
    • manfromlaramie
      Hi all - new to the forum.  I live in NE Wyoming and am an avid fly fisherman.  While I love fishing for trout out west, warm water species on the fly is a blast.   Me and a buddy are headed out this coming weekend for a BWCA trip.  We have a couple of days on the front end of the trip to fish.  I'm planning on towing my drift boat from NE Wyoming and have spot picked out in North Dakota to float for smallies on the fly.  I'm looking at trying to get an additional float in somewhat near Ely before our entry into the Boundary Waters.  It's a 16' drift boat and doesn't really draft much.  I'm planning on having a small trolling motor just in case I need some additional power.  Looking mainly to target smallmouth and pike.   I've looked at a few areas to float, but wanted some advice.  I have a few options that I think meet what I'm looking for:   1) St. Louis River near Hoyt Lakes.  Looked like there are couple of access points to launch and take out below Hwy 110 2) Cloquet River - Hwy 7 to the mouth. 3) Bigfork River - From Ivan Crawford to Reedy Flats   Can anyone provide any advice these or provide any other recommendations?   Thanks in advance!  
    • gimruis
      I have been doing pretty good bass fishing locally.  A lot of numbers, but lacking in really big quality fish that I have caught the last two seasons.  Biggest I could catch this season so far is 18 inches.
    • leech~~
      Welcome to the forum. Downriggers work best for suspended fish in deep water. Most river's are shallow and rocky. If you want to fish the bottom in a river a bottom bouncer might be best to not lose a lot of expensive gear. Imo. Good luck. 
    • DeEon
      I have a Cannon Optima and Iam anxious to try downriggers for walleye.  There is a bottom tracking feature on Optima.  I think most walleyes are close to bottom so I think it is a good tactic.  I am, however, nervous about using Fishhawk XD4 with on river.  A screwup would really be expensive!
    • smurfy
      i'm not real involved yet. my first meeting. long story but my parents belonged to it years ago. after the cabin lake had the 2 consecutive years of severe winterkill i dogged the heck out of the fisheries people in grand rapids.🤭 i found out through the watershed assoc they talked them into restocking sunfish and bass into the lake. they did that this past june. so i figured for the 15 bucks join!!!!!   my next battle is with the township......🤣 trying to get them to grade part of our road going into the cabin!!!!! i already sent the letter but havent heard from them yet. since i've retired from being a union thug.......i gotta pick a few battles to keep my skills sharp!!!!!!!!🤪🤭👍
    • Kettle
      That's awesome that you are involved in that! I hope you have a good trip up!
    • smurfy
      I'm heading up sometime the last week in Aug . I joined the Jessie lake watershed assoc and they have a meeting on the 27 I want to attend.
    • Kettle
      Definitely in the dog days of summer. Catching a few walleye here and there on the river. Hasn't been too hot which makes me hopeful for an early fall fishing season. I'll post more when the fish turn their feed bags on and the leaves start falling. Until then I'll just work more and get winter gear ready
    • Kettle
      Definitely in the dog days of summer. Catching a few walleye here and there on the river. Hasn't been too hot which makes me hopeful for an early fall fishing season. I'll post more when the fish turn their feed bags on and the leaves start falling. Until then I'll just work more and get winter gear ready
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.