• RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Recommended Posts

fisherslanding

I have never fished it but want to give it a try this year since I have found the access on the north end. It looks to have some nice spots to try. I want to target eyes any hints from you fellow FMers? Set lines, Jiggin'? Hope to get out tomorrow before the front comes in.

Thanks

Fisherslanding

Share this post


Link to post
Share on other sites
Northlander

Fish the breaks close to weeds and jig a small spoon with a minnow head or waxies. Perch, Crappie, walleye and small pike.

Not a huge producer but a decent lake. Be careful it seems like someone falls through that lake every year. Last year I think 2 did.

Share this post


Link to post
Share on other sites
ripstick

For sure to watch it om grand springs have a way of popping up. Last year they went in by shore.

Share this post


Link to post
Share on other sites
Surface Tension

Most of the lake is shallow and weeds.

Northlander's advice about finding a deep edge is what you'll want to do.

I might get out in the afternoon, drop me a line if your going alone.

Share this post


Link to post
Share on other sites
fisherslanding

I'm going to try and get out to the lake by 2:00. I will be alone so some company would be nice. Maybe we can work 2 different depths. Shoot me a email if your game. fishersland@yahoo.com. Hope to see you out there

Share this post


Link to post
Share on other sites
Surface Tension

You got mail.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • CigarGuy
      Was out for a while on the Partridge River this afternoon, didn't have any minnows, managed one 13" crappie on Gulp waxes.  But, the old Strikemaster almost bottomed out-close to 30" of ice.
    • SkunkedAgain
      I don't know what your Helix 7 requires in the manual, but a quick look would figure out if that 3amp is too small. Definitely wire your sonar to the motor battery using the correct gauge wire and fuse. If you connect it to another battery, it should be a stand-alone. Connecting to the trolling motor battery will generate interference.
    • SkunkedAgain
      I've done cheeks quite a few times and they are always good. They take only a few seconds to carve out. I like to get the most out of the things I kill to eat, so I'm not afraid to pull them out of smaller ones. I'm glad to see that so many people picked up a new tip. That's the point of congregating on these forums. I wonder how many non-registered folks will read this and learn something new.
    • CigarGuy
      I've been doing them for many years.  Like Cliff, a friend who was a guide on LOW brought some out prior to the main course-been doing it since. 
    • Tom Sawyer
      With the snow cover completely gone and lots of standing water, 60s in the forecast, with plenty of sunny days next week, and a good chance of rain mid-week; this may be my last weekend on the ice, South of Hwy 210 anyway . Fish have really been on the chew
    • Alex wilhelmi
      hey guys..i installed the helix 7. took it out the other day. it keeps  randomly shutting down, with the motor off it will stay on no problem. Heres where i think i f'd up. i used the same 3 amp fuse harness from the old sonar that came with the boat, the old hb depth only kind. its wired right to the ignition wire. i used the correct gauge wire where i needed it. im guessing its not getting enough juice? also if i wired it direct to a separate battery, how do i go about hooking up and on board charger? or would i be ok just wiring direct to the battery that runs the motor? thanks for any advice. those musky lures look so bad ass! nice work !!
    • delcecchi
      Really small scallops
    • delcecchi
      I think it is a matter of the material involved.   Ethanol can corrode some metal and dissolve some organic stuff like rubber or plastic that gasoline doesn't affect.   Or so some sources say.     
    • Tom Sawyer
      I guess I was being to kind. Nah nah nah nah, ....Turn out the lights already. LMAO!How Disappointing. Wolves your next......
    • ProGuideEyes
       Did you leave vermilion Tom???