• GUESTS

    If You  want access  to member only forums on FM, You will need to Sign-in or  Sign-Up now .

    This box will disappear once you are signed in as a member.

  • Join In - We Share Fishing Reports & Outdoor Information Here

     
      You know what we all love...

      The same things you do!!!! Share what you love & enjoy in the outdoors as well as thank those whose posts you 'appreciate.'

      Have Fun!!!

Sign in to follow this  
maros91

Best time to scout

Recommended Posts

maros91

I have just picked up 2 pieces of property to hunt for the fall of '08. Actually it is just 1 since the 2 properties adjoin. My question is when the best time scout these properties? The properties are located NW of Silver Bay, Mn and I live in Milaca so they are not exactly down the road. I want to scout at least once before I hunt. I have heard that spring is the best, sometime in March when there is still snow on the ground and you can still see last falls rubs. I have seen the aeriel photos and they don't show to much. The land is basically heavy timber with steep hills according to the landowners. The properties are 100 acres a piece,so 200 total. Alot of land to cover. What do you guys think?

Share this post


Link to post
Share on other sites
LuciandTim

Now!

Share this post


Link to post
Share on other sites
matthothand

I'd get in there now as well...There's snow on the ground so you should be able to spot where the deer are traveling. You might be able to better establish where their major food source is during cold weather. I'd go as close to now as possible or wait til snow is almost gone in spring. Just have a good idea where you want to hunt before the season starts. Or atleast set up in a spot where you have good visibility and can adjust location based on the movment you can see from a distance. You're on the right track with the arial photos...try to find different sources for those online or through county offices, etc. The area I bowhunt has some really steep hills and I did a lot of my scouting from the computer by viewing topo maps at different angles. Steep hills will often form perfect funnels which make for great stand loctions during the rut...or anytime! Also use a trail cam if possible to find trails leading to bedding areas or food sources.

Share this post


Link to post
Share on other sites
Deitz Dittrich

I would say that anytime is a good time to scout, so long as it isn't the day before season. My fave time of the year is March/Apr- as the snow melts. Shed hunting. Weather is cool so you dont get overheated as bad. Rubs and such show up well. Now is a good time because you can see some scrapes and such still I would bet.

Share this post


Link to post
Share on other sites
sticknstring

Always fun studying a new piece of hunting ground. Is the property being hunted by anyone right now? If not - get up there right now... you'll find sign in the fresh snow and you can get an idea of how the deer move. Otherwise I like to wait until late March early April and cover the whole property looking for old rub lines & scrapes and maybe even a shed antler or two.

Share this post


Link to post
Share on other sites
bigbucks

My first response is, whenever you can, kind of like when's the best time to hunt.

Secondly, I'd say now. If you're going to gun hunt there or late season archery, ML, etc. this is exactly what it will look like next fall at that time. It gives you a chance to see where you can see & where you can't. I'd say looking at sign now, other then well worn trails won't tell you a lot, as they're already starting to switch to winter patterns & there may not be that much fresh sign where there will be when you're hunting next fall. Some of that will depend on if there's still food there now & if there was much gun hunting pressure there this year.

Scouting comboed with shed hunting next early spring is good too, but I think this time is better. I would also not be afraid to scout again in August or even in season. You just need to try to make it as low impact as you can, but I've killed a lot of deer because of in season adjustments.

Share this post


Link to post
Share on other sites
maros91

Thanks for the responses boys! There were people gun hunting this year and one muzzleloader and one archery. However all of these people are from the same party and will not be hunting there next year because they are buying their own piece of property closer to Lutsen. Since there are people still hunting there I think I will hold off until spring somewhere around late March/early April to see what I can find and maybe stumble upon a shed ot two.

Once again thanks for the responses!!!

Share this post


Link to post
Share on other sites
matthothand

If possible talk to the people that hunted there this year. Pick their brains a little.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • ANYFISH2
      Nice work Borch! Or maybe I should say Mrs. Borch?   Looks like I missed out.
    • papadarv
      Keys to make the blade work well. *Sharp! *Cutting edge needs to line up to the Gullet of the opposite blade! *Add a .020 shim 1/8" wide between blade screw and cutting edge. Increases cut angle to same as K-Drill! I'm working on another set welding  1/4" piece of blade to the outside blade edge extending the blade 1/2" past auger flight making it a full 8" hole. Note how the K-drill blade extends 1/2" past the auger flights.  
    • leech~~
      I like your blade work as well. Two summers ago when I sold my hand auger at my garage I think I throw out about 4 sets of those old blades as well!  😣
    • papadarv
      Made the drill point out of a spade drill bit welded to a 3/8” 16 bolt/screw than cut & ground to shape the point. Drilled & tapped center of blade bracket. Tap slowly as that steel seem a grade or two above basic mild steel.
    • bluewater2
      Thank you  
    • leech~~
      That is some sweet work right there. I see these at garage sales all summer, may be I should start picking them up?  Looks like you added a drill point on the end of them as well. The adapters and the end point are key items on making these right.
    • papadarv
      I went a different route, got several vintage Mora 7 1/2" hand augers $10 to $15 each with the old hardened sweedish steel blades modified to replicate K-drill style blades #5. Went with clam plate 3/4" drive bit & M18 Fuel Mud Mixer worked ok on early ice #1. Wanted to try my DeWalt/Jiffy so converted to the 7/8" drive bit, didn't have the power to cut the agressive blade #2. Later ice in Wheelhouse, went with my Eskimo 43cc with a Walker 25' flex exhaust out the door, cut 32" ice in 27 seconds #3. Ran 4 1/2 holes to 1 of my buddies new green ION 8in. Made some adapters to put the 7/8" auger bits on my Clam Plate and Mud Mixer#4 for early ice this comming season.
    • Wanderer
    • ANYFISH2
      OUCH!!! 6 players down to injury in one game.  We were thin at O-line depth before, now we have "1st" line players having to play nearly an entire preseason game, because we dont have enough bodies!  This is going to be major issue going forward.   Overall, not a good showing offensively. Jacksonville is a very good defensive team, but we definitely need to be better.   Defense, look pretty good!  We need to complete turnover chances, at a better rate.     3rd RB race is going to be fun to watch.   Special teams, are kinda leaving me wondering.  Punt coverage is quite shaky.  Carlson is looking more like our guy, after Forbath missed a 41 yd fg.
    • Borch
      That's ok.  Was a good day on the water.  Took my wife out this afternoon and had a nice day fishing.