Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0

Theodore Wirth Park

1 post in this topic

I'm lucky enought to start and end every business day with a brisk ride home on a bike. I take a wiggly little back route through the Wirth park area. This afternoon (within site of my usual archery range) I ride within 20 feet of this enormous buck. Even without the big fat swollen neck, he was intimidatingly large. And he had fist-sized antlers starting on his head. He's gonna be a biggun'! My wife works for a company that backs up to the railroad tracks near there. In the early fall, I've stumbled upon bachelor groups of 10 or more mind blowing bucks nuzzling and romping around on the blacktop of her parking lot. I'd swear that acre for acre, that area has more and bigger bucks than anywhere else I've ever seen.

Wouldn't it be great to fling an arrow through those trees? Surely some tree hugging nudist sunning themselves on the shores on Twin lake would have a coronary at the thought of killing one of his furrry friends, but the thought of dragging a once in a lifetime buck out of a park within sight of my office building would be pretty darn cool....

Anyone else have much experience around this park?

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  
Followers 0

  • Posts

    • ZachD
      LX-7 Firmware  LX-7 Software Update v5.10 (Release Date. Oct. 25th 2016) Update Procedure System requirements – PC only computer with 2.0 USB port and a 2.0 USB cable. Do not attempt upgrade without 2.0 port or cable. Save the LX7main.bin file from the MarCum website to your desktop (do not change the file name or extension). Plug in a USB 2 cable to your computer. DO NOT plug it into the LX7 display at this point. Remove the LX7 display from the gimbal Remove the transducer from the LX7 display Plug in power to the display from the 12v9amp battery provided with the LX7 Press and hold the down arrow, continue to hold the down arrow then press and hold the power button together until the screen flashes and you see the LX7 logo appear on the screen.  Release both buttons, and listen for the chirping. Chirping will remain consistent. If the unit powers off you have held the buttons down too long. Plug in the USB cable to the LX7 display (your computer should automatically recognize the external LX7 device). If not go into My Computer and you should see the external LX7 storage device. It could take your computer several minutes to recognize the LX7 storage device. Warning: If you see a message stating, "this process could perform faster with USB 2". STOP-- you will need to try a different USB port on your computer until you do not receive this message.  Drag the file from your desktop to the external LX7 device that popped up on your computer Listen for the long steady beep followed by chirping When you hear the chirping, safely eject using the "safely remove hardware" icon normally found on the bottom right hand corner of the screen of your computer.  Power down the LX7 display using the power button Replace the rubber USB plug Reassemble the LX7 Go Fish!
    • gunner55
      I have to agree with eyeguy. We usually don't put it up & take it down a bunch in a day. One of us might look for a new spot & if successful, then move.
    • MrSchrute
      The wife and I are looking to rent a sleeper on leech before the new baby comes. Does anyone have any recommendations on who does it best? I have contacted a couple of places on availability but am looking for any suggestions based on experience. I have decided on Leech over Mille Lacs due to the goofy limits they have this year. Thanks!
    • huntnfish
      Pretty quiet in here. Does no one fish the river anymore?    I made it out again the other day but this time with both kids. Fishing is a little more difficult with a 4 and 6 year old that like to pester and pick at one another. We fished for about and hour. The first half hour was the 2 arguing about who's line gets to go where and me playing referee to keep a hook out of fingers. After they became bored with that we were able to fish. I normally don't use minnows but picked some up to put on the kids hooks. I also used them on my jig. We ended up taking home 4 walleyes for the kids to have a meal and missed and lost a lot more. Every eye I caught just hammered the jig and all had a belly full of minnows.    When end we got home my 6 year old daughter helped me filet the fish. She made me smile when she demanded that I open the stomach to see what was in there. She pulled out the Y bones and checked to make sure I didn't miss any in the filets. I cooked them a couple days later. I thought with 4 fish between 15-17 that I'd at least get a taste but I was wrong again. My semi-picky children devoured every last bite of fish. 
    • Grainbelt
      Good idea, thanks for the info!