Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
No_Net

Big Stone help

3 posts in this topic

I'm going there tomorrow for my first time. What areas, bottom type, and depth hold the fish this time of year? What are some of the better lures to use? Thank you

Share this post


Link to post
Share on other sites

Check the old posts from this time last year, tons of information.

Shallow and jigs will most likely be best bet. Shallow meaning cast the jig off the shoreline rocks.

Share this post


Link to post
Share on other sites

last weekend the bite was mainly towards the north end in the shallows sounds like fishing has gradually picked up through the week expect the fish to still be shallow try fishing around the islands over rock piles, using jig and minnow or slip bobber also try throwing crank baits. good luck

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • borg0196
      BeardyBuddha hit me up this winter, we can go out together. I know some backwater action for ice.
    • borg0196
      leech flutter spoon!
    • eyeguy 54
      thx for the info guys.  maybe we can pop a video or 3 up in a month or so with the different setups. Might have a foot of ice to play with.  
    • eyeguy 54
      not eating. just thinning the herd. took out 5 last week
    • borg0196
      You can use the clam plate with the k-drill, they make an adapter. The K-drill recommends a minimum of 725 or 750 for torque, so you almost have to get the higher end drills. The newer Clam has the gear box which will double your torque with a 2:1 gear ratio. You can pick up the conversion box for $70. They had a deal on those at the show last weekend, as well as the K-drill. The K-drill cuts through the ice like butter, if you get the clam plate and conversion box, you should be able to still get double the torque then. So Clam plate $70, plus the Clam conversion box ($70), and add in the K-drill ($215), and I already have a drill. Brings the total up to $355. But don't have to purchase gas or propane or, light weight, no fumes. I will let everyone know how it works out.