Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
Dahitman44

Breaking in a new motor?

3 posts in this topic

I have a Suzuki 175 and I was reading the manual last night and noticed it talked about doing a lot of extra stuff during the breaking in period.

It talked about changing the oil and grease within the first 20 hours. Is that really necessary? Is that what a person should do or is that overkill?

also it talked about staying in the 3,000 rpm area during the first 2 hours -- I thought it was best to move the throttle around quite a bit and not stay in just one RPM zone?

Anyone have any advice on a new motor?

Thanks

Share this post


Link to post
Share on other sites

Go by the book on that four stroke for breaking it in. My break in period was around seven hrs of use. Treat her right and she'll treat ya right. I just ended up getting my oil change at the end of the first season, and only had 18.5 hours on the motor. That Suzuki will record how many hours and at what rpms you are running it.

Also, I was very mellow with the motor last year, and it showed on the computer printout. I just had it out for the first time this year on Monday night and I think they did a little tweaking with the motor during the first oil change, seems like I'm getting a little more gusto and rpms now.

Share this post


Link to post
Share on other sites

I would go by the book. I did on my Zuke and all turned out well. Its a 98 and running strong.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • CigarGuy
      Del,  it's on Cook, MN facebook....March 23.  Timberjay, you need a subscription to view entire story.
    • Rick
      The Minnesota Department of Natural Resources will collect and analyze water samples from about 90 wells in Washington County this spring. The data are being collected for the Washington County Geologic Atlas, an effort involving the Minnesota Geological Survey and the DNR’s Ecological and Water Resources Division.  DNR staff will contact county residents to request permission for well sampling, which involves collecting a water sample and measuring the depth to water in each well. Tests will profile the general chemical characteristics of area groundwater and will also show approximately how long the water has been underground. Geology, location, well depth and well construction will determine the selection of wells for sampling. Owners of sampled wells will receive a report of the laboratory results for the water sample collected from their well. Preserving the long-term quality of the region’s surface water and groundwater requires that policymakers have access to accurate information based on sound scientific principles. A county geologic atlas is a valuable tool for county planners, resource managers and other local government staff when making general planning, land use management and water resource protection decisions. The Minnesota Geological Survey has already published Part A of the atlas, which illustrates details of each county’s geology. In 2019, the DNR will publish the groundwater portion of the atlas (Part B). The Part B reports will include maps and descriptions of the distribution and movement of groundwater, cross sections illustrating groundwater conditions, and the pollution sensitivity of aquifers in the county. The DNR County Geologic Atlas program is funded in part by the Minnesota Environment and Natural Resources Trust Fund as recommended by the Legislative-Citizen Commission on Minnesota Resources. Funding also comes from the Clean Water Fund, which receives 33 percent of the sales tax revenue from the Clean Water, Land and Legacy Amendment approved by voters in November 2008. A full description of this DNR program and status reports for atlas products is available on the DNR website. For information, contact: Jim Berg, DNR hydrogeologist, 651-259-5680, jim.a.berg@state.mn.us; or Paul Putzier, DNR county geologic atlas program supervisor, 651-259-5692, paul.putzier@state.mn.us. Discuss below - to view set the hook here.
    • delcecchi
      I looked at cook, mn page didn't see the story.  both webpage   cookmn.com and the facebook page https://www.facebook.com/CookMn/ and the cook group   https://www.facebook.com/groups/396154887224760/ Not on Timberjay site either.     You can post a link by just copy/and paste the url from the bar in your browser into your post. 
    • AlwaysFishing23
      I would say gas augers are still getting better. For example my solo engine always starts never leaks and emissions are very very low. I don't think I burned a half gallon of gas the whole winter and I drilled maybe 500 holes max still not a lot but pretty good for only using a cup or so of fuel an outing. Not saying electrics are bad but for me I just can't pull my self away from the convince of gas. Every winter I think I do give more and more respect to cordless drill or electric set ups. Well then also with this last winter we had a goo full 24 inches of ice for maybe 3 weeks this it starting melting fast
    • Wanderer
      I like the electrics too but it will be a necessity for me to finally give up my gasser for good.  One tank on it can cut many, many holes.  Batteries are expensive so I don't plan on buying extras for those days I plan to explore.   I think it was mentioned on the forums before: With the mapping apps and gps we have available now, we probably all drill fewer holes over the season than we used to.  The problem I have though is I don't repeat locations many times over the winter. Heck, not even lakes that often.  I've been carrying the gas, electric and hand auger pretty much all winter.