Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
Chuckster

Honda 50hp Sensors?

2 posts in this topic

I finally got the boat and motor in the water today on Leech in front of the river landing. I just got the boat in December and wanted to give it a test try. After about 10 minutes of idling around and trying everything out it started beeping at me. My sensor lights were both off, and I read that the oil pressure light should ALWAYS be on. I checked the oil, looks great but maybe too full. The water was very shallow so I had the motor trimmed up some. Could this be a result of the enging being trimmed up and the oil triggering that sensor? This may be a rookie question but I have never owned a Honda before and would like to get it resolved before open water. Thanks for any info!

Share this post


Link to post
Share on other sites

That is probably it, I have the same motor and you can't trim it up much before the sensor sets the alarm off, Happens alot when I'm power loading on to the trailer.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • Wanderer
      Feb 5 @ 5:25 pm.   But I couldn't tell ya who's playing. 
    • Wanderer
      Sounded like a good mix of fish.    The walleyes I lost were because I couldn't get a good enough hook set on em.  I was using my light action crappie rod with 2 lb test.  Even the ones I iced had the hook come out while the fish were in the hole.  I was just quick enough to get a hand on em.   I tried the same presentation on a walleye rod with 8 lb test and never actually got bit.
    • monstermoose78
      What day is that on 
    • Big A
      Excellent question. In the beginning of the day it was out away from everything and everyone. Visibility was low so I chose to stay within sight of others in case of problems, but certainly far away. Found a group of structure points that we were extremely happy about. Ranged from 16ft to 33ft on navionics. Morris point-cyrus area.   Fished that entire zone we had found, which is probably 1.5miles x 1.5miles give or take. Fished inside it with varying depths, fished the edges, fished the curves, then when it started to rain we set up the house and fished about 15yds off of everything in 30ft. Caught 5. Biggest was 10in.   The slush is making it difficult to manuever, I have tracks and am concerned of getting that stuck.    Unsure what happened over night with the weather now. Today we may need to stick to the old resort trails and work the road areas, plenty of vacated real estate out there...    Chains, tracks, or tires. With all this slushy mess... It's a hard choice and everything is a limitation.   Plan to try and work 18ft and out.... If you see a group of guys doing summersaults and bouncing around like they have welding sparks in their pants, you'll know that's me and we found some activity.
    • ZachD