Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

  • Announcements

    • Rick

      Members Only Fluid Forum View   08/08/2017

      Fluid forum view allows members only to get right to the meat of this community; the topics. You can toggle between your preferred forum view just below to the left on the main forum entrance. You will see three icons. Try them out and see what you prefer.   Fluid view allows you, if you are a signed up member, to see the newest topic posts in either all forums (select none or all) or in just your favorite forums (select the ones you want to see when you come to Fishing Minnesota). It keeps and in real time with respect to Topic posts and lets YOU SELECT YOUR FAVORITE FORUMS. It can make things fun and easy. This is especially true for less experienced visitors raised on social media. If you, as a members want more specific topics, you can even select a single forum to view. Let us take a look at fluid view in action. We will then break it down and explain how it works in more detail.   The video shows the topic list and the forum filter box. As you can see, it is easy to change the topic list by changing the selected forums. This view replaces the traditional list of categories and forums.   Of course, members only can change the view to better suit your way of browsing.   You will notice a “grid” option. We have moved the grid forum theme setting into the main forum settings. This makes it an option for members only to choose. This screenshot also shows the removal of the forum breadcrumb in fluid view mode. Fluid view remembers your last forum selection so you don’t lose your place when you go back to the listing. The benefit of this feature is easy to see. It removes a potential barrier of entry for members only. It puts the spotlight on topics themselves, and not the hierarchical forum structure. You as a member will enjoy viewing many forums at once and switching between them without leaving the page. We hope that fluid view, the new functionality is an asset that you enjoy .
Sign in to follow this  
Hookmaster

Silverado cruise control quit

Recommended Posts

Hookmaster

I have a 2004 Silverado on which the cruise control quit working after going through the snow on Bowstring two weekends ago. I thought it may come back when everything thawed out but it hasn't. Does anybody have any ideas on where to start looking to fix it?

Share this post


Link to post
Share on other sites
hawkeye43

I had the same thing. Found out later that the switch on the brake peddle was set to low. I lifted the peddle with my foot a few days later and it work. Then I adjusted the switch so you had to step on the peddle harded to kick it out.

Share this post


Link to post
Share on other sites
Hookmaster

I lifted the brake pedal on the way to work this morning and the cruise still didn't work. I will look closer at the switch tonight. Any other ideas? Any sensors or fuses to check?

Share this post


Link to post
Share on other sites
Jeremy airjer W

Hookmaster, I was going to look up some info for you at work last night and completely spaced it. For sure I will look tonight and will try to post tonight (after 10:00).

Share this post


Link to post
Share on other sites
MattWtech

everything else is ok? throttle and throttle response is good? i know on the new GM TAC drive by wire systems the cruise is controled by the throttle actuator.

if so check fuse, has its own fuse, its a 10 amper.

if thats ok, ide check the ground, and thats at the throttle actuator control (TAC) module and thats where that circuit grounds to, the 3 controls are to that one common ground so wiggle the connectors. but usually bad grounds are intermitant, so i doubt thats the problem, anyway its on the firewall little gray box

thats kind of the easiest things i could think of to do at home, there are diffrent things you could start with or diagnose, but thats bout the easiest it gets to do at home.

these new cruise systems are kinda easy so hopefully we can talk you thru all the easy stuff to fix it, theres more we can suggest so let us know what you try

Share this post


Link to post
Share on other sites
Jeremy airjer W

Ditto what matt said.

There are four fuses that this system uses. Two are in the under hood fuse block (ETC/ECM fuse *unlikely* and the stop lamps fuse *probably wouldn't have brake lights and likely would have an ABS light on if this one was blown*). the other two are in the instrament panel fuse block (lower left side of the dash). these would be the vehicle stop fuse and the cruise fuse.

If all these check out than the next step is to brake out the scan tool. Like matt mentioned the cruise is integrated with the "drive by wire" throttle control. There are only two additional components that the cruise uses. the cruise control switch itself and the light that lets you know the cruise is on.

This doesn't really help a whole lot but at least you have some idea of the simplistic complexity of this system. Or as I like to call it, progress!! grin.gif

Share this post


Link to post
Share on other sites
Hookmaster

Thanks for the replies. I checked the "cruise" fuse and it looked good but swapped it with another 10 amper anyway. No change. I will check the other ones you have described. Is the TAC on the firewall on the driver's side? I took off and put back on the two wireharnesses on the box on the driver's side firewall with no luck. I'll check it's ground this weekend.

Share this post


Link to post
Share on other sites
Hookmaster

I checked the other fuses by sight and with an ohmmeter. Everthing checked out OK. I couldn't believe how many fuses were in the fuse block under the hood. Maybe it was taking them out and putting them back in that improved the connection but it worked after that. Thanks for telling me which fuses to check. That's why FMers are the best.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Posts

    • Glockwinger
      Big Marine had 8" at the north access out to the weeds before the main lake.  Lots of walkers, a number of wheelers.  5 inches past the weeds above the ice before the island.   Access was crazy...very inconsiderate people tripple parking, a guy I was with got parked in, trucks behind and in front of him.  Luckily I was parked beside him and was able to move enough that he could get his truck out.   Fishing was very slow.  Couple panfish, a bass and snake northern.
    • Jari
      I'm definitely itching to get on the river.
    • Zachary Cisar
      I was out on Hiniker Pond last night. Had no luck with fish but I was after dark. Straight out from the pier about 30 yards you got a solid 3.75 to 4 inches. Duck lake has about 5 inches. Henry had 4 inches last week. Not sure about this week.
    • shaky legs2
        Doc was up there with a couple of his boys on Thursday fishing out of portables.  He gave me a call when he was on the ice.  I said, “. Let me guess what you got on”.  Red stripe Demon with a female fat head hooked through the pooper hole on the dead stick and a purple smelt rattling flyer with a minnow head on the other pole.  I nailed it.  He still uses a jiggle stick for his dead stick.  He had to sign off as a fish came in on the Vex.  Put it in the bucket Shaky.
    • traveler
      Not even a little kelly? Lol   Good to see a few of the old guard still checking in ...:)
    • JIvers
      Thanks for the reply. Ya, McNally's gets pounded right away. I looked at the ice in front of Schafer's in Onalaska yesterday; there was about 3.5" of ice near the docks, and then it got thinner in a hurry. Apparently someone got wet feet there earlier in the day.  I ended up at Lawrence Lake Marina just north of Brownsville yesterday. There was probably 4" of good clear ice, much better than what I found in  La Crosse. Will post pictures later, but I got one nice largemouth on a tip up at the Marina, one 10" perch, and a couple small perch.  Today I drove around Winona, and fished the backwater pond east of Latsch Island on the west side of the road. The ice there was...not real good.  I stuck close to shore on 3" of not-real-clear ice after my spud bar saved me from a cold bath a little farther out.  I caught a few small perch there, and a bunch of small bluegills. Nothing worth keeping, and nothing on the tip-up. Was expecting the ice to be a little better than what I found, but what do you do?    
    • leech~~
      No Lake Trout in the lake?
    • leech~~
      Thanks Guys.  Starting to feel better about may be getting the sled and porty out there.
    • kelly-p
      Miss the old days too shaky, we had some fun didn't we.  I don't miss working on the lake tho.
    • kelly-p
      Westwind, Roger's and JR's that I know of. Not sure of the cost.