Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
pine329

CMC PT-35 Power lift

3 posts in this topic

Does anyone out there, have a CMC PT-35 power lift for motors 2-35 Horse Power?

I am think of buying one, because it is getting harder for me to tilt my 25 Johnson and I think it would make life a lot easier if I had one of these lifts. confused.gifgrin.gif

Share this post


Link to post
Share on other sites

I had a 35 and also a 130, they are very nice units. CMC are probably the best out there, very good construction.

They are also easy to install, very straightforward and simple, you won't regret your purchase, you'll feel so good when you tilt your motor up, and you'll be able to get into shallow areas witout risking to damage prop or lower unit.

Share this post


Link to post
Share on other sites

If you putting this on a tiller one thing to consider is the 5" setback. Is that going to be OK with your rig?

Also if your boat can handle a larger OB and you've thought about it, nows the time to step up to a 40hp with tilt&trim.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • BringAnExtension
      What a novel concept!  Talking fishing on a fishing forum to increase interest and activity.  You may be right, it could work!  
    • leech~~
      So let me see if I understand this? You guys on the last page or so are going to "Lets Save This Forum" by high jacking the thread and talking fishing now!     Dam that could just work? Carry-on!   Good Luck.
    • jriegel
      Thanks guys for the tips looks like 3-4inch stick bright stick baits and bright spoons seem to be the go to.  Anybody ever vertical fish them or live bait? Hope the weather is.good next friday, i have always wanted to get out there and try it.  Bonus is the wife would be happy with some fresh salmon.
    • ducksnbucks
      I have been looking at the gages this morning and the L.F. still appears to be either frozen or have an ice jam at the most downstream gage in Little Fork. The discharge is not working but the water level has risen 3' since Sunday. The next upstream gage however is flowing good and has risen from 1,200cfs to 5,000+cfs since Sunday and has risen 8' in the same period. The Big Fork doesn't have cfs data so I am thinking its frozen but the height has risen 2.5' since Sunday. I would think with that flow and the warm weather it's only a matter of days until they both go.   Other trips like the Black River and Rapid River are all on the rise both cfs and height.   Also, I took a look at the Rainy at Manitou Rapids and it has risen about 2' and has gone from 14,000 cfs to 17,500 cfs since Sunday.
    • northspear
       I'm heading up Friday. Going out of spring steele. I have a delivery route that took me up there today.  Took lunch at the warroad access. They got it closed with yellow tape.  If anyone heads up earlier an update would be great.  I'm planning on an atv but will walk if I have to.  Thanks.  Good luck and tight lines!!!