Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
Ducks and Fish

Cold Weather Gloves?

7 posts in this topic

What do you guys wear for gloves fishing assuming you are going to get them wet? I usually use my duck hunting gloves, but they are a little hard to cast with. Anyone try those sealskins? I want something thin and have good feel, yet water repellant.

Share this post


Link to post
Share on other sites

I buy a three pack of the brown cotton gloves from Wal-mart or Menards. When they get damp, I put on a new pair. I keep three pair in my jacket. They keep off the chill and have a surprisingly decent grip.

Share this post


Link to post
Share on other sites

I use the neoprene ones with the index finger and thumb finger slots so you can slip your fingertips out/in as the need arises. Not bad on keeping dry but not great on keeping warm. I usually put a couple of those chemical pads that you shake and they get warm/hot in my pockets to help with warmth. They work surprisingly well.

Daze Off

Share this post


Link to post
Share on other sites

I use the smae as Daze. They are glacier gloves , and they work real nice. Use them Musky fishing.

Share this post


Link to post
Share on other sites

Master Mechanic's, you can cast with them on. Now if I can find the pairs that have disapeared. mad.gifmad.gif

Share this post


Link to post
Share on other sites

I keep a box of surgical gloves in the boat. I wear them under whatever gloves I am wearing and me hands stay dry and warm.

Tom B

Share this post


Link to post
Share on other sites

I just saw something in the gear review in Field and Stream. Cloudveil gloves. Anyone ever try those rod wraps?

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • noska
      Hey Barefoot on the main lake or current areas? 
    • jkrash
      a tournament-record 10-pound, 2-ounce beauty was big fish and A record 110 boats fished this year’s tourney, held out of the marina at Fortune Bay Resort Casino. 492 walleye, another tournament record, were weighed and released at this catch-and-release event.
    • Bowfin
      My daughter is shooting my 12 gauge 870 Wingmaster really good. Im looking for a nice looking, nice shooting and dependable pump shotgun for her at a decent price. I'm not liking the newer 870 Wingmasters as much as I did when I bought mine 30 years ago. I recently saw some Weatherby PA08s. Very nice looking gun which rival the looks of old Wingmasters with walnut stock, deep checkering, fairly light for $350 new. Reviews I see from 2011-2014 have me concerned a bit about hard trigger pull and shells sometimes not ejecting. Anyone have any experience or knowledge about these Weatherby pumps? If there were issues, you would think Weatherby would have fixed them by now.
    • jb426
      I did this a while back.  If you have basic carpentry skills you can do it for under $200. Here's what I did.   Get 2x8 treated board.  Cut to length of back bench.  Attach a swivel seat to board then attach board to back bench using screws and glue.   Buy two sheets of 4x8 3/4" sheeting that's rated for exterior and a gallon of deck stain.  Stain said sheets.  Cut out one for floor and one for casting deck up front (i used the front bench with a little bracing in between).  Use left over 2x8 for bracing casting deck.  You will also need one 2x4 treated board for bracing of the floor.  Install casting seat up front.  Looks good and is cheap and easy.  I used cedar stain and bought cedar colored treated lumber.  If I remember correctly I cut out the middle bench.   Only problem was it added a lot of weight so had to upgrade to 15 horse.  Sold it  a couple of years later for a $100 profit.  Just an idea.  
    • Walleye #1
        Walleyes on Leech Lake found themselves spread out but actively feeding on shiners.  A Jig and shiner or a plastic and lindy rigs with shiners and leeches were the go to presentations during the course of the week.  Somedays walleyes were wanting it dragged along which is where lindy rigs worked well and other days snapping or twitching a jig and minnow was the ticket.  So being diverse in your presentations, changing up colors and cadences, and getting away from the crowds is the ticket.     West End - Fish were found on West Goose Flats, Star Point, Grand Vu Flats, Duck Point, Pine Point, Stoney, and on some of the breaklines in Traders Bay.  Depending on the day depths changed, but it seemed the best bite was in 8-14 feet of water.  Find the shiners and you found walleyes closeby!     East End/Main Lake - Main Lake Rocks are still producing a large quantity of fish in the 20-26” protected slot, with some keepers mixed in.  Annex, Submarine, Five Mile, Pelican Island, and Rogers Point all had decent bites. Fish were typically found in that 8-12ft range on this part of the lake and finding areas with sand and boulders was the key.  Portage Bay also reported a good bite up near Federal Dam.  Look for emergent cabbage in Portage, especially on those bright and sunny days where those walleyes will look to find cover.  Pitching a jig and minnow or jig and plastic for these Leech Lake Walleyes in the cabbage is fun way to catch them.     Jumbo Perch are also showing up with the walleyes, but often times will be shallower.  Found some of our best perch bites in 6-10ft of water, with some really nice jumbos mixed in.     Jason Freed Leisure Outdoor Adventures Fishing Guide Service
    • HugeHogChaser
       Any boat restorers here in the twin cities area?  Looking to get some information and possibly a quote on a 12 foot aluminum boat. Would like benches re-done with carpeting, and possible floor work. Thanks in advance, I appreciate it!
    • HugeHogChaser
      Good evening,   i recently inherited a 12 foot aluminum boat, and I would like to re-do the interior. (Add carpet to the benches, possibly add marine grade plywood to the floor and carpet the floor as well.)   does anybody have any experience doing this, or recommend anybody that is good with this type of thing?    Trying to figure out if it's worth it to pay someone to do it, or try and figure out how to do it myself with no experience.    Anyways, thanks in advance! 
    • JeremyCampbell
      Nice bass Eyeguy. I can imagine that Northern was fun peeling out line and all on the yak lol.   Hit the miss on my way home.Was curious what was hanging out by a drain I often fished in the past.Found a few typical average sized bass and a sucker.Way to kill 15 minutes on my way home from work lmao.I love it  
    • osok
      Nice Fish ST! Loadmaster, I hope it was nothing major or serious that had you in the hospital.  I was just informed by the Chief of Staff that I get to do house projects this weekend..sigh..maybe Monday I'll get to go out. 
    • Barefoot
      I went yesterday.  Bite was good.  Saw lots of people catching fish.