Guests - If You want access to member only forums on FM. You will gain access only when you Sign-in or Sign-Up on Fishing Minnesota.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
Pikemaster101

A Fin On A 115

4 posts in this topic

I have a Yamaha 115 if i were to put a fin on the motor would it be worth it or would it be a waist to drill holes in my motor for it?

Thanks

Share this post


Link to post
Share on other sites

I installed one on a 115 on a 17' crestliner. It has helped my hole shot, smoothed out my ride, and has not effected my top end. My only other comment is it will effect the handling (cornering). I will install one on my next boat.

Mg

Share this post


Link to post
Share on other sites

would you recomend for me to get one or is it not enough change to tell

Share this post


Link to post
Share on other sites

The easiest way to answer that question is do you have mor than two people in the boat on a regular basis? If the answer is yes, then get one. If it is no then don't. The fins help your hole shot and get you on plane faster. Especially if there are several people in the boat. But as was said you will sacrifice some handling.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • BringAnExtension
      What a novel concept!  Talking fishing on a fishing forum to increase interest and activity.  You may be right, it could work!  
    • leech~~
      So let me see if I understand this? You guys on the last page or so are going to "Lets Save This Forum" by high jacking the thread and talking fishing now!     Dam that could just work? Carry-on!   Good Luck.
    • jriegel
      Thanks guys for the tips looks like 3-4inch stick bright stick baits and bright spoons seem to be the go to.  Anybody ever vertical fish them or live bait? Hope the weather is.good next friday, i have always wanted to get out there and try it.  Bonus is the wife would be happy with some fresh salmon.
    • ducksnbucks
      I have been looking at the gages this morning and the L.F. still appears to be either frozen or have an ice jam at the most downstream gage in Little Fork. The discharge is not working but the water level has risen 3' since Sunday. The next upstream gage however is flowing good and has risen from 1,200cfs to 5,000+cfs since Sunday and has risen 8' in the same period. The Big Fork doesn't have cfs data so I am thinking its frozen but the height has risen 2.5' since Sunday. I would think with that flow and the warm weather it's only a matter of days until they both go.   Other trips like the Black River and Rapid River are all on the rise both cfs and height.   Also, I took a look at the Rainy at Manitou Rapids and it has risen about 2' and has gone from 14,000 cfs to 17,500 cfs since Sunday.
    • northspear
       I'm heading up Friday. Going out of spring steele. I have a delivery route that took me up there today.  Took lunch at the warroad access. They got it closed with yellow tape.  If anyone heads up earlier an update would be great.  I'm planning on an atv but will walk if I have to.  Thanks.  Good luck and tight lines!!!